Tank-O-Matic Liquinator v4.1

[hairball]

All of my Boge cartos come from greenhouseone with the exception of the last few boxes I just got. I haven't had any problems with them in the tanks. As for cleaning one that has 25mls ran through it, no. They are cheap enough to replace so toss it.

 

[wfarrar33]

Back long long ago when I use to use the original GG Beta tank to vape with which was the very first tank we use to run 901 Attys in that tank, with that said I would love to try that and play around with that on one of these, I know how to make it work and it would be fantastic in this tank, if anyone is interested in doing this let me know, I don't have one of these tanks and may not ever get one but if ya got some 901 LR Attys gimme a shout and I''l tell ya what to do if you don't know and you will be in heaven vaping a 901 Atty out of this tank.

got the 901s and im listening......

 

[wfarrar33]

got tired of reading all the pages, will the IKV fusion carton work with these?

Also go you need any kind of extention to use these on provari?

 

[PoliticallyIncorrect]

got tired of reading all the pages, will the IKV fusion carton work with these?

Yes, it will (and does).

 

[wfarrar33]

anyone with a provari know what if any extensions/adapters i will need to make this sit as close to flush on the top as possible

 

[Chingas]

I have a provari. No adapter needed, just use a 510 carto and you are good. The tank can slide around a bit so it can be pushed down so that it is flush with the top of the ProVari but it cuts off the draw quite a bit. Just adjust the tank to your liking and vape yerself stupid.

Due to the flared bottom of the Fusion you will only be able to get the tank down to the top of that flare.

 

[wfarrar33]

Yeah i know you wont be able to get it flush with an 801 but ive seen lots of map tank pics where their flush just didnt know if an adapter was needed. Thanks for the relpy

I have a provari. No adapter needed, just use a 510 carto and you are good. The tank can slide around a bit so it can be pushed down so that it is flush with the top of the ProVari but it cuts off the draw quite a bit. Just adjust the tank to your liking and vape yerself stupid.

Due to the flared bottom of the Fusion you will only be able to get the tank down to the top of that flare.

 

[jed]

to get an 801 down close to 510 battery connection avidvaper has the stealth 510 to 801

 

[wfarrar33]

thank you sir, i actually just ordered one of there about 10 minutes ago!!!

to get an 801 down close to 510 battery connection avidvaper has the stealth 510 to 801

View attachment 44143

View attachment 44144

 

[jed]

not cheap but not cheap either....2 thumbs up

 

[wfarrar33]

not cheap but not cheap either....2 thumbs up

i like how you put that

 

[kwcharlie]

ya, they are good, using now, you know who Avid is don't you jed? Cisco's retail outlet, tried his G4's not so hot but new i was trying something still working

 

[jed]

have ordered the lr's from there....actually only place you can get the Cisco LR 306's....went exclusive awhile back

 

[throbinskin]

I just stop in here real quik to say I have tried the IKENVAPE Fusions...... And OOOOOOOOOOOOH my... ((( Thank You!))) !!!!! Loving these even better. O need to find a stealth adapter for a 801 to keep it shorter!

Are there any good dual coil carts that will fit in our tanks right now? They have some on the website - but, I'm not digging the white color!

 

[seantex]

I got some of those dual coils and I think they are ok. Not too shabby but not fantabulous either. They really change the flavor

 

[throbinskin]

OK........... Thanks... Going to order more stealth adapters ! Thanks... I like these fusions!!!

 

[kwcharlie]

I just stop in here real quik to say I have tried the IKENVAPE Fusions...... And OOOOOOOOOOOOH my... ((( Thank You!))) !!!!! Loving these even better. O need to find a stealth adapter for a 801 to keep it shorter!

Are there any good dual coil carts that will fit in our tanks right now? They have some on the website - but, I'm not digging the white color!

the DC they sell, pre cut, are very good IMHO. YOU slot with a disk? anyone punched a fusion yet with a nail?
I think i posted this somewhere else: the slots are 3/8 inch above the bottom of the SS tube

 

[hairball]

If you punch a hole kscharlie, make sure you don't go too deep or you'll ruin the carto. However, I don't see why it wouldn't work as long as you get it as close to the bottom as possible.

I ordered 5 of the 5ml's. I'm obsessed with the tanks...LOL. I plan on putting my favorite 5 juices in them. I already have some DCs cleaned and ready to go.

throbinskin, glad to hear you got some fusions ..they really work very well in these tanks.

 

[kwcharlie]

should be the same as the DC's, 3/8 inch,
i just cant get my fusions off a PV running alone (thay art REALLY good) and take a DC out of one of my tanks, they are doing so good too.
Need to order more but just bought 3 of Stormy's ARRY's for all the leaky Clearomizer CE2's i have, tired of cutting syringes and like how CE2's do in the bigger tanks

 

[MediocreTrombonist]

Just got a 5mL DC tank in the mail, filled, and vaping it. The carto the came with the tank is vaping great! Running on an IMR 18650 with a Silver Bullet. The taste is great, and the vapor is full and warm.

However, as I vape, I develope a gurgle. It's as if I am sucking the liquid into the air canal. It only takes a couple drags for this gurgle to become substantial. Also, when I stop vaping and lay it down, the gurgle subsides. Maybe I added too many drops to the center of the carto before vaping. I don't feel as though I'm inhaling too hard...

Am I on the right track? Any other troubleshooting tips? I'll continue to inspect what's going on and report back if I can fix it.