~The Billet Box~ page 1559 continued...

[Novarion]

The Kabuki drip tip aka John Doe from House of Hybrids has always been my favorite on the BBox.

Never could do the sleeves.

Mums Fantasy Factory has amazing after-market panels/doors if you want to switch up the look.

If you rebuild, get the VapeShell by Atmizoo.

If you don’t rebuild, I’m not really sure what bridge to get, as I have only rebuildables for my collection.

I’m sure I have a nautilus coil bridge tucked away somewhere, but I don’t use it.

Will check that drip tip, have you got a picture with it?

Yeah I’ve seen some work of Mums, really like the clear panels! I think they look beautiful with a rat black.

Got some coils and cheap rba’s on the way to try and test. The VapeShell seems to be pretty good, from what I’ve seen.

 

[NickSGsy]

I got on the list for a krma bridge. Will report once i have received and tested

 

[Uncle]

Well - Before Everyone gets too busy and begin their Celebration of the Holidays with Friends & Family . . .

​

To All "My" ECF Friends here - I want "You" ALL to know No Matter What "You" Personally Celebrate this Month of Holidays - Be It . . .

The Best of Winter Solstice - the Longest Night of the Year . . .​

​

​

​

​

A Great & Bright Chanukkah . . .​

(Hanukkah)​

​

​

A Very Merry Christmas . . .​

​

​

​

A Celebration of Kwanzaa . . .​

​

​

​

​

The Meaning of Kwanzaa​

​

​

​

I would "Like' To Pass-on To "You" and Yours"​

The Best This Holiday Season Has To Offer . . .​

​

Comfort - Light - Happiness - Good Fortune​

​

​

AND - May Everyone "You" Know​

Have A Joyous and Prosperous​

​

​

​

​

​

​

​

May these Days - For "YOU" & "Yours" - be Filled with nothing but . . .​

​

"PEACE" ~ "JOY" ~ "HAPPINESS"​

​

​

​

.

 

[NickSGsy]

Well - Before Everyone gets too busy and begin their Celebration of the Holidays with Friends & Family . . .

​

To All "My" ECF Friends here - I want "You" ALL to know No Matter What "You" Personally Celebrate this Month of Holidays - Be It . . .

The Best of Winter Solstice - the Longest Night of the Year . . .​

​

​

​

​

A Great & Bright Chanukkah . . .​

(Hanukkah)​

​

​

A Very Merry Christmas . . .​

​

​

​

A Celebration of Kwanzaa . . .​

​

​

​

​

The Meaning of Kwanzaa​

​

​

​

I would "Like' To Pass-on To "You" and Yours"​

The Best This Holiday Season Has To Offer . . .​

​

Comfort - Light - Happiness - Good Fortune​

​

​

AND - May Everyone "You" Know​

Have A Joyous and Prosperous​

​

​

​

​

​

​

​

May these Days - For "YOU" & "Yours" - be Filled with nothing but . . .​

​

"PEACE" ~ "JOY" ~ "HAPPINESS"​

​

​

​

.

In true bb thread fashion i give that a big fat
Ditto

 

[Tamer El-Meehy]

Merry Christmas to you and yours guys!

Well after four years in the squonking rabbit hole, and two years before then in the regular vaping rabbit hole, I decided it’s time to jump into another rabbit hole and join you guys.

Initially I tried to maintain some semblance of sanity and I decided to order a clone before I get to the real thing. However, before the clone got to my hands, I found this beautiful Dober that I couldn’t leave alone. So I ordered it with a Flow V.2 [emoji16]...should get it in 4 or 5 days.

Oh...this reminds me..what’s your experience with the Flow V.2?? Does it do proper MTL??

I know people don’t look kindly upon Odis Designs for a very good reason, but I would appreciate the assistance. [emoji4]


Sent from my iPhone using Tapatalk

 

[HBcorpse]

Merry Christmas to you and yours guys!

Well after four years in the squonking rabbit hole, and two years before then in the regular vaping rabbit hole, I decided it’s time to jump into another rabbit hole and join you guys.

Initially I tried to maintain some semblance of sanity and I decided to order a clone before I get to the real thing. However, before the clone got to my hands, I found this beautiful Dober that I couldn’t leave alone. So I ordered it with a Flow V.2 [emoji16]...should get it in 4 or 5 days.

Oh...this reminds me..what’s your experience with the Flow V.2?? Does it do proper MTL??

I know people don’t look kindly upon Odis Designs for a very good reason, but I would appreciate the assistance. [emoji4]


Sent from my iPhone using Tapatalk

Merry Christmas!

I don’t have any experience with the Flow v2

However, after battling the Flow v1 issues, and finding a build (outside my usual) that works well with it, I can say I do enjoy it.

Purely DL though.

To this date, I haven’t found an atomizer than can satisfy my desire to have an MTL experience with the Billet Box.

Now, I’ll admit, I’m extremely biased in this quest.

Here begins a short(?) tale.

Stop reading here, if you’d prefer the short answer above.

My journey started, 9 years ago as of FEB-2020, with MTL (most people who started more than 3-4 years ago are roughly on the same boat).

Oh those steel wool-looking bridge atomizers, and the funny poly-fill cartos, with their incessant need to be dripped upon.

Then the punch & tank carto days...fond memories.

Enter the Kayfun Lite.

I found my way to restricted lung hits (RLH), and settled in for many years of comfortable vaping, which seemed to peak with the Kayfun v4. (Lots of Kayfun references in this story!)

Then I found a few DL “clouds bro” setups that were fun, and I enjoyed a few thunderclouds for a while...still do from time to time.

But restricted lung hit is my home base.

Calix from ByLeo (rest in peace) v1’s through v4’s cover both DL and RLH, and I love them dearly.

Then the new Kayfun Lite [2019] was released.

I found my way back to MTL in a big way.

I use my nKFLs on my Provape Radius, and I’ve got them dialed down to the airflow of my preferred pod unit (the Phix).

Nic salts at 36mg/50mg depending on the brand / flavor.

29g Kanthal, single wire coil, 2~mm diameter, 8 wraps, 1.5~ ohms, 10 watts, Boost at 4/5 (depending on mood/flavor).

Tootlepuffing away.

Battery life for days.

It’s amazing.

So I started trying to build an MTL setup for my BBs.

No luck.

The VapeShell (with MTL pins) gets it the closest, but there’s one thing missing.

The BOOST feature my Provape Radius has.

I’m sure many out there are familiar with “boosted” mods...which fire the coil at a higher-than-set rate, in order to overcome thicker gauge wires or higher resistance builds, and then settles to the actual wattage setting selected by the user.

This really makes for a great pod-like MTL experience with my nKFL and Radius setup.

The DNA60 cannot do this, at least in an unmodified state (outside of how it is set from the factory).

I have ZERO desire to molest my Billet Box babies, in order to utilize Evolv’s e-Scribe program to explore/create a Boost feature or some such similar situation. (Intentional alliteration)

Therefore, I am left with beautiful Billet Box bliss, using my restricted lung hit builds, and regular old 3mg juice.

Sorry for the short novel. I’m aware a much simpler answer would be sufficient.

But it’s been a long day, with many beers, much food, and I like to let my mind wander and my fingers tap away at the screen, when under such conditions.

 

[HBcorpse]

 

[Tamer El-Meehy]

Wow...well..we have a similar story ...here is the table of contents as far as I can remember:

1. Ego
2. Innokin MVP (15 watts)
3. Several provaris ending with the P3
4. Kayfuns
5. Roses
6. The Semovar (abeatiful german tube mod that topped at 15 watts), the Futura, SX minis and other stuff.
7. Several mechs and atties
8. Squonking - four years of squonking including various mods and atties (tens of mods and aties actually) until I realized that I am a mech guy and that I love the Nuppin’.







Sent from my iPhone using Tapatalk

 

[kas122461]

Merry Christmas everyone.

​

KAS

 

[Tamer El-Meehy]

Hi everybody ...Hope you guys have had a merry Christmas...while spending some time reading whatever has to be read on the BB, I came across a thread in Planet of the Vapes that provides a tutorial on how to seal the BB’s 510 and screen against juice leaks.

So I thought I’d ask the connoisseurs, is this a recurrent issue? Do I have to do it to my new BB??

Thanks


Sent from my iPhone using Tapatalk

 

[HBcorpse]

Hi everybody ...Hope you guys have had a merry Christmas...while spending some time reading whatever has to be read on the BB, I came across a thread in Planet of the Vapes that provides a tutorial on how to seal the BB’s 510 and screen against juice leaks.

So I thought I’d ask the connoisseurs, is this a recurrent issue? Do I have to do it to my new BB??

Thanks


Sent from my iPhone using Tapatalk

Uhhh...

Methinks you’ve run across something strange.

The BB doesn’t have a 510.

The screen has a gasket around it.

So my vote, is nope!

 

[ShamrockPat]

.... how to seal the BB’s 510 and screen against juice leaks.

The BB doesn’t have a 510.

I think he meant the positive pin. The flat copper that the rba/coil touches just above the screen

 

[Tamer El-Meehy]

Yes actually it is the positive pin...a noob mistake [emoji849]


Sent from my iPhone using Tapatalk

 

[HBcorpse]

I think he meant the positive pin. The flat copper that the rba/coil touches just above the screen

That’s what I was thinking, but I just wasn’t too sure since I hadn’t seen the video in question!

Yes actually it is the positive pin...a noob mistake [emoji849]

If ya don’t make mistakes, how the heck can you learn???

 

[NickSGsy]

Hi everybody ...Hope you guys have had a merry Christmas...while spending some time reading whatever has to be read on the BB, I came across a thread in Planet of the Vapes that provides a tutorial on how to seal the BB’s 510 and screen against juice leaks.

So I thought I’d ask the connoisseurs, is this a recurrent issue? Do I have to do it to my new BB??

Thanks


Sent from my iPhone using Tapatalk

Im still fairly new to bb but asked the same question. I was told that it is only needed for the clones, the real deal is already sealed up good.

 

[HBcorpse]

Im still fairly new to bb but asked the same question. I was told that it is only needed for the clones, the real deal is already sealed up good.

[emoji344][emoji443][emoji441]“Ain’t nothin’ like the real thang babayyyyy”[emoji441][emoji443][emoji344]

 

[Tamer El-Meehy]

And it’s here...my first Billet Box and the Flow V.2!

Sent from my iPhone using Tapatalk

 

[Uncle]

FYI: Tomorrow this BB thread will be 5 years old . . .

NOW - As for Tonight . . .

Before all the festivities begin . . .

TO ONE & ALL

.​

 

[kas122461]

Happy New year Friends.

​

KAS

 

[TheSneakerHoarder]

I got on the list for a krma bridge. Will report once i have received and tested

Any word? Mine should be here next week.