The Final Count Down -- Are You Ready?

[DancingHeretik]

I used a hack saw to saw the lid off. Not recommended.

I've wanted to do that so many times! But, I don't have a hacksaw.

I've only ordered nic from WL once, because I hate those bottles.

Regarding creative ways to remove a lid...

I may or may not have recently discovered that Aleve comes in 100 ct bottles with a non-childproof cap that is coated with rubber to make it grippier to make it easier for old people to open.

I want to say that discovery was purely coincidental.

They do make easy open bottles for us old people. You can even ask the pharmacy to put all your prescriptions into easy open bottles.

See, this is a good point. A lot of people here are commenting on "when will the price drop" kind of thing. Some won't drop at all. A lot of that will depend on many things: how fearful the vendor is, whether they have any future in business with other products after the hammer drops, where their orders come from, and as you pointed out - their overall business model.

I can't imagine it could get much cheaper that it is right now.

Last nic I bought was in March from ECX. They had it for 30% off (which they do often). So, I bought 2 liters and got free shipping. That comes out to only $35 per liter of 100 mg/ml. Cheaper than that and it would be free!

 

[DaveP]

I went surf shopping today to see if there was anything I needed on sale. Lots of online vendors are low or out of stock already, at least for the old school MTL stuff I wanted. I'm stocked up, but I always feel that too much is better than not enough, especially with the current government scares and some actual bans.

 

[Uncle]

I went surf shopping today to see if there was anything I needed on sale. Lots of online vendors are low or out of stock already, at least for the old school MTL stuff I wanted. I'm stocked up, but I always feel that too much is better than not enough, especially with the current government scares and some actual bans.

Don't forget if Ya' ever find a really impressive, inexpensive and great deal to let "Us" know . . . Just Sayin" . . .




.

 

[DavidOck]

He will. Right after he places his order

 

[Uncle]

Actually, I would expect as much, especially if you found out there was such a deal...





.

 

[440BB]

If someone is hunting for something specific, either a good deal on an item or a hard to find item, I've taken to sending them a PM/Conversation before posting it in a thread. I wait to hear back for a while first. Things are disappearing in multiples right now as the stocking frenzy grips the community.

 

[DaveP]

Don't forget if Ya' ever find a really impressive, inexpensive and great deal to let "Us" know . . . Just Sayin" . . .
.

Well, I did see a deal at EightVape on a uwell squonk kit for $19.95 (originally $69.95). They have lots of serious markdowns.

Uwell Blocks 90W Squonk Kit

 

[hittman]

I can’t remember if it was on this thread but someone said that the V8 baby rba would fit in the geekvape Cerberus. I got two in the mail yesterday and tried it in a Cerberus. The top and bottom threads are correct but the bubble tank is far from sealing when it’s all screwed together. Am I missing something?

 

[Sugar_and_Spice]

I can’t remember if it was on this thread but someone said that the V8 baby rba would fit in the geekvape Cerberus. I got two in the mail yesterday and tried it in a Cerberus. The top and bottom threads are correct but the bubble tank is far from sealing when it’s all screwed together. Am I missing something?

Did the baby rba come with a glass tank itself? Some of them did and those usually will fit.

 

[hittman]

Did the baby rba come with a glass tank itself? Some of them did and those usually will fit.

I didn’t try it. I will.

 

[hittman]

Did the baby rba come with a glass tank itself? Some of them did and those usually will fit.

Nope. The glass is too small to fit the top cap.

 

[JoeyC]

I didn’t try it. I will.

Hope it works I have 4 of those rbas coming

Edit::
Crap guess they will go up for sale once they get here from ft

 

[Letitia]

I can’t remember if it was on this thread but someone said that the V8 baby rba would fit in the geekvape Cerberus. I got two in the mail yesterday and tried it in a Cerberus. The top and bottom threads are correct but the bubble tank is far from sealing when it’s all screwed together. Am I missing something?

Might need the big baby rba taller glass.

 

[hittman]

Might need the big baby rba taller glass.

The inside diameter of the glass is too small. It won’t go over the top or bottom tank pieces. I accidentally broke the Cerberus bubble glass getting it off. The oring on the top was super stuck to the bubble tank.

 

[jandrew]

Well, I did see a deal at EightVape on a Uwell squonk kit for $19.95 (originally $69.95). They have lots of serious markdowns.

Uwell Blocks 90W Squonk Kit

That's a good deal --- I like mine quite a bit.

 

[NolaMel]

The inside diameter of the glass is too small. It won’t go over the top or bottom tank pieces. I accidentally broke the Cerberus bubble glass getting it off. The oring on the top was super stuck to the bubble tank.

I think I have a couple of those tanks. If I can locate them, you can have them

 

[hittman]

I think I have a couple of those tanks. If I can locate them, you can have them

That would be great. I don’t know what I’d do with the rba decks I bought. I was really hoping to use them on the Cerberus tanks I have. I like the Cerberus but didn’t want to try stocking up on coils for it.

 

[440BB]

There was a time we could find replacement glass that was interchangeable between toppers but with the large number of tanks now on the market I don't think there has been as much measuring, trial and error as in the past.

 

[BigPappa]

The inside diameter of the glass is too small. It won’t go over the top or bottom tank pieces. I accidentally broke the Cerberus bubble glass getting it off. The oring on the top was super stuck to the bubble tank.

Cerberus tank bubble glass tube Geek Vape Online Store

 

[Myrany]

I can’t remember if it was on this thread but someone said that the V8 baby rba would fit in the geekvape Cerberus. I got two in the mail yesterday and tried it in a Cerberus. The top and bottom threads are correct but the bubble tank is far from sealing when it’s all screwed together. Am I missing something?

I changed the glass on my cerebus to the straight glass the cerebus came with and it worked. No idea why you are having issues. I would not have recommended it if it didn't work for me

Edit unless the rebuild deck changed since first released. My rebuild decks I bought years ago

Edit 2: I just pulled one of the new Baby Rebuild decks I got in last night and tried it in the cerebus and it wouldn't even fit to screw in. SO apparently not all Baby rebuild decks are created equal