You do realize that the flavors of TFA ARE pg, so you should consider that into your percentage of pg as well. Let's say that if your total flavor percentage is 20, that equates to 20% pg.
The Flavor Apprentice Flavoring Thread
- Thread starter glassmanoak
- Start date
- th_trl_thread_readers 0
- Status
You do realize that the flavors of TFA ARE pg, so you should consider that into your percentage of pg as well. Let's say that if your total flavor percentage is 20, that equates to 20% pg.
So one of my first DIY recipes that I pulled out of thin air has turned out amazing after modifying it with my second mix. I tested it the next day and it was better than the first mix, but the other day I took it(with a bunch of my other DIY stuff) up to a vape shop my friend works at and let him try a bunch out since it was a slow, snowy Sunday. It was my first time trying it after it had steeped for almost a week and we were both blown away by how good it is in an rda, to the point where he asked me to mix up a batch to sell to him :3
80% VG
10% TFA Chai
4% TFA French Vanilla
2% TFA Koolada
1% Ethyl Maltol(10% in PG)
3% 100mg base in PG
If you like Chai and like to drip, give it a test and let me know what you think
80% VG
10% TFA Chai
4% TFA French Vanilla
2% TFA Koolada
1% Ethyl Maltol(10% in PG)
3% 100mg base in PG
If you like Chai and like to drip, give it a test and let me know what you think
Thanks Bill for all your great recipes, I couldn't find your DIY calculator, can you please post a link to it to browse your recipes freely, as I just on my baby steps in DIY.
I use this calculator: eJuice Me Up - Best eJuice Calculator
Good luck!
Hi all! Been reading this thread and learning what I can for several months and finally came up with something I feel is good enough to share. I really want to give thanks to Bill for all he has contributed! He is the reason I picked DIY back up after losing hope on my first try about six months ago. So THANK YOU BILL!! And thank you to everyone else that contributes to this thread and makes it such a great place!!
So here is my first "keeper"! It's not entirely my creation but it's my version of a sweet cereal flavor that I pieced together from here!
FYI- I'm vaping it on my goto tank which is an Aspire Atlantis that I rebuild the heads with a single horizontal 5 wrap 26g spaced coil .8 ohm using rayon at 25-30 watts. I mix it to 70/30 VG/PG at 2mg nic and for ME its totally awesome flavor and vapor!
All TFA flavorings..
Fruity COPYRIGHTDMCA:
Fruit Circles 8%
Berry Crunch 5%
Cotton Candy 4%
Sweetener 4%
Vanilla Swirl 3%
Bavarian Cream 3%
Dulce de Leche 3% (Bill's "milk at the bottom of the bowl" so true!)
If anyone gives it a shot I'd love to hear some feedback!
Thanks again to all and keep on mixin!
Man am I ever gonna try this one.
Another big order in to TPA for fruit circles and berry crunch!
Thanks nopioson!
Fruit circles rocks!!!!!! Very spot on, love the lemon flavoring in it....very, very happy with this flavor, hits the spot for me!!! Mixed with the berry crunch, sweetener, cream of choice....yummy!
Also very pleased with the dx banana cream, very nice, need to adjust my recipe still(the strawberry part), but this flavor is quite tasty too for my tastes.
Also very pleased with the dx banana cream, very nice, need to adjust my recipe still(the strawberry part), but this flavor is quite tasty too for my tastes.
Ok so now I have to try these Fruit Circles, Berry Crunch 
it maybe faster and cheaper if I was to just order one of every flavor I don't have.
it maybe faster and cheaper if I was to just order one of every flavor I don't have.I think Bill was implying that he has all of his recipes stored in his personal calculator at home, not that he created a calculator with all of his recipes for people to use.Thanks Bill for all your great recipes, I couldn't find your DIY calculator, can you please post a link to it to browse your recipes freely
Ok so now I have to try these Fruit Circles, Berry Crunch
I was thinking the same thing! To the point that I wrote down every flavor TFA has in 4oz bottles, and did an inventory of what 4oz flavors I already have. I am up to 44 with the order I made yesterday, but looking at my sheet, I haven't even put a dent in what they offer. I'm still 150 bottles short of having all of the flavors I think I could use in a mix
I was thinking the same thing! To the point that I wrote down every flavor TFA has in 4oz bottles, and did an inventory of what 4oz flavors I already have. I am up to 44 with the order I made yesterday, but looking at my sheet, I haven't even put a dent in what they offer. I'm still 150 bottles short of having all of the flavors I think I could use in a mix
I would have to go with Wizard labs and get the test samples $250 vs $1200.
Now how to sell this to the wife as logical
I would have to go with Wizard labs and get the test samples $250 vs $1200.
Goodluck with that! I'm pretty sure it's only logical to the handful of people here. I'll just have to keep chipping away at it, sneaking in a few bottles a week
Hello all, My name is John and I have been lurking for some time
here is one I make for a friend .. this is simple .. and I am going to play around with it later .. see what I can come up with.. but this good and easy right out of the mix
Champagne 10%
Strawberry ripe 6%
Juicy Peach 4 %
easy peasy
I mixed some of this up last week and just got around to testing it today. It is excellent! At first I thought I tasted the strawberry more, no it's the peach, no it's the strawberry, lol. And underneath it all the champagne is a solid base. Good job!
I use the P-touch PT-1900. Prints 4 lines, but displays only 2 lines via LCD. Auto tape cutter and 8 type sizes and styles. I use it with 6 re-chargeable batteries. With 1,000 charge cycles, these batteries will be dead long after I am! I use the TZ 1/2" laminated tape, black on white, but there are many choices. These label makers are great and I use them for all sorts of projects. Good luck!
Just wanted to let you know that I got my Brother P-Touch PTD600VP label printer and it works great! I'm using your scheme of 3 lines with name, VG/PG ratio, and qty/date. It is so nice not to have smeared labels!
It prints my labels for my TFA ejuices just fine (notice how I made this post thread-appropriate).
Thanks to everyone who recommended the P-touch label printers.
That's how i usually do it.I'll grab 1 or 2 4oz. bottles,and a couple small samples of new stuff each week.I have splurged a bit here lately,only because i got my taxes back,so i have bought like 12 4oz. bottles the last few weeks,but normally it's 1 a week,so at that rate i'll be dead before i could possibly get every flavor haha.
Congratulations DarthEmma! That's a really nice one. Amazon had a great deal on the "VP" (comes with the case). Most of the other places I checked wanted as much for the PTD600 without the case.
Last edited:
I got my notice that mine shipped yesterday. Hopefully will have them tomorrow. I have been using packaging options direct for all my glass bottle orders until now. I'm hoping I'm happy with this order because glass bottle outlet definitely saved me some dollars
All the 30 ml bottles are hermetically sealed in flats of 64. Very clean and look very clean rinsed one with PGA and then dsw. Very nicely packaged. The broken 4 Oz bottle was a ups ding in the box it appears to not be due to packaging. Child resistant dropper is well for and it has a nylon gasket over the rubber so the juice doesn't hit that black rubber
- Status
Similar threads
