The kayfun conversion kit for terminator/nautilus

[Innocuous]

Someone resigned a slot, and I updated that list when I saw it.

Man, I wish someone would make this stuff stateside - or at least some polish shop would go wild and FLOOD the country with these kayfun-killers. Freakin' snobs.

I wish I could try one of the kits, because I plan to order only one - and if it's this good, I'm going to wish I had a pair to alternate.

 

[Technonut]

Someone resigned a slot, and I updated that list when I saw it.

Man, I wish someone would make this stuff stateside - or at least some polish shop would go wild and FLOOD the country with these kayfun-killers. Freakin' snobs.

I wish I could try one of the kits, because I plan to order only one - and if it's this good, I'm going to wish I had a pair to alternate.

I did the same thing by ordering only one kit at first... Should have listened to my gut, and ordered 2 instead... The kit IS that good.. I'm back on the list again.....

Oh well, I have a couple of other Term C's to play with, and a RH Ithaka clone arriving tomorrow to keep me busy with some dual-coil action until my # comes up again... I just hope the machines continue to run smoothly in Poland...

EDIT: Anyone running Ekowool with the kit?

 

[Innocuous]

I'm still trying to find the magic-bullet for the Terminator-C: ekowool/ewokfur, or silica; proper gauge.. I'm running less than a week and then thinking the wicks are bad. (Yes, I wash and dryburn and whatnot).. Something about the setup is simply not clicking.

 

[deezdrama]

I ran ekowool at first but my ohms came out too high for a mech, after recoiling with a micro and cotton, WOW!

Just finished my first tank through this kit.... good to the last drop, not a single dry hit, leak, or gurgle.

Just filled back up with some hhv shadow and also dripping shadow on a a7 with eko... the flavor from this kit is on par with the dripper!

Pretty impressive sofar! Setup and juice change is a breeze.

 

[Innocuous]

Well, in my universe cotton is for shirts, pants and rolling cigarette filters: not going down that road again.

I suspect I'm just too used to mesh and need to rethink it a bit. Yes, I am really looking forward to #230 - around christmas, I imagine.

 

[fordski]

Hmmm, might be a good idea to pm vouchu or whatever his name is... he speaks english I was told.

Done. Thanks for the suggestion.


Sent from my iPad using Tapatalk HD

 

[deezdrama]

Ya ive used hemp and everything but cotton before, up untill about a week ago when I found this thread...

http://www.e-cigarette-forum.com/fo...o-coils-increase-vapor-flavor-th-gotonew.html

Gave a micro coil and cotton x (sterile rolled cotton) a try in igo-l and it was like vaping again for the first time, nothing ever created as much v/t/f before and thats coming from a guy who strickly ran mesh in gennies for the past year. Cotton is the only wick material that keeps up with the micro coils as well, and its a breeze to rewick.

I now have a reo grand on the way.

Dont get me wrong these kayfuns are excellent, and better than anything ive previously used except for the cotton micro combo.... I was very skeptical at first and the cotton gives off a cottony taste at first but it goes away quick and leaves a very pure taste afterwords.

Just check that thread out if you have time.... theres boatloads of people getting wowed out of there mind and its worth the effort to slap a micro in an old dripper and just poke some qtip cotton through it for a trial run.


Ok sorry for getting off topic......

Kayfun kit.............

Well, in my universe cotton is for shirts, pants and rolling cigarette filters: not going down that road again.

I suspect I'm just too used to mesh and need to rethink it a bit. Yes, I am really looking forward to #230 - around christmas, I imagine.

 

[Chowderhead1972]

Cottony taste? I can't even imagine... Pm sent in re complete set up...

 

[tj98_7]

I am #150 on the list. Payment sent. Got tracking. Now waiting on customs to release it. This might take a while. I hope to have it by this weekend. Can't wait to post what it looks like with my full window I got from rampage a few mouths ago. I even have the hybrid adapter the sg-1. Just need my kit.

 

[upsetter21]

When I don't close the Juice Flow, and lay it on its side for an extended period, some juice shows up in my collector tank. This kit clears itself very easily though... never gets into an endless gurgle.

I'm very pleased with xc-116 wick & AWG32 Kanthal. The vapor is kicking me off the PV and I see no reason to bother with a dual coil. I'll try a Micro for the heck of it, but seriously I don't need any more vapor at all.

 

[Chowderhead1972]

When I don't close the Juice Flow, and lay it on its side for an extended period, some juice shows up in my collector tank. This kit clears itself very easily though... never gets into an endless gurgle.

I'm very pleased with xc-116 wick & AWG32 Kanthal. The vapor is kicking me off the PV and I see no reason to bother with a dual coil. I'll try a Micro for the heck of it, but seriously I don't need any more vapor at all.

Close the juice control and blow it out. I had the same problem from over pressurizing when filling the first time.

 

[anavidfan]

This conversion kit sounds pretty cool, I went to the link etc. I could not find a price? Can someone tell me how much the kit costs with shipping to US? Thanks all, just when I thought my spending was over , you pull me back in with something like this.

 

[villarino1k]

This conversion kit sounds pretty cool, I went to the link etc. I could not find a price? Can someone tell me how much the kit costs with shipping to US? Thanks all, just when I thought my spending was over , you pull me back in with something like this.

A few that got em said it was about 57 shipped.

 

[anavidfan]

Thank you , this would be a great way to see if I like the Kayfun experience without having to order the whole atomizer. Im one of those "old dogs" that knows I can learn , but more like a cat which just doesnt want to For 60 I can try it out on an Odysseus.

 

[Technonut]

Holy crap!! After a successful vaping session with the Vochu kit and German silica, I moved-on this morning to just a single piece of XC-116 ceramic wick, and 4 wraps of AWG 30... Can you say vape-bliss? I have the coil running right down between the posts close to air-hole, with just enough wick to tap over the juice channels.... DAMNNNNN what a vape...

The trick is to wrap the wire around just enough to make contact with the wick.. No tighter. No pin or paper clip used in wrapping..

BTW.. Has anyone figured out the size of the post screws? I'd like to replace mine with Phillips-heads..

 

[Innocuous]

(Innocuous mutters inaudible imprecations as he continues to fight the wick in the Term-c...)

 

[upsetter21]

Yup that's very similar to me... and I'm simply done searching. There's nothing more to ask of my PV.

Holy crap!! After a successful vaping session with the Vochu kit and German silica, I moved-on this morning to just a single piece of XC-116 ceramic wick, and 4 wraps of AWG 30... Can you say vape-bliss? I have the coil running right down between the posts close to air-hole, with just enough wick to tap over the juice channels.... DAMNNNNN what a vape...

The trick is to wrap the wire around just enough to make contact with the wick.. No tighter. No pin or paper clip used in wrapping..

BTW.. Has anyone figured out the size of the post screws? I'd like to replace mine with Phillips-heads..

 

[tagster]

I did the same thing by ordering only one kit at first... Should have listened to my gut, and ordered 2 instead... The kit IS that good.. I'm back on the list again.....

Oh well, I have a couple of other Term C's to play with, and a RH Ithaka clone arriving tomorrow to keep me busy with some dual-coil action until my # comes up again... I just hope the machines continue to run smoothly in Poland...

EDIT: Anyone running Ekowool with the kit?

I initially ordered two then at the last minute ordered a third. It was a tough decision. I knew if I liked it I would regret not getting more, but on the other hand I am disappointed more than not. In the end it was the waiting time that forced my hand. I figured I could always sell it in the classified if I didn't like it. But when do you say stop? The newest and greatest is always just around the corner.

I am using Ekowool 3mm with a 1.2 ohm .5 Kanthal ribbon, and the vape is on par with my sub ohm Gennie. I have to get me some of that XC-116.

Is anyone else finding the drip tip add on a little too loose?

 

[anavidfan]

I'm getting real close to ordering a kit, is there an instructional video on how to actually install it and set it up? Id like to get an idea what Im in for.

 

[deezdrama]

Check youtube for gg kayfun conversion, todd from todds reviews did a vid for it