The black does the silver not so much , they etched these so they are not exactly the same .
- Status
The black does the silver not so much , they etched these so they are not exactly the same .
Great about not cracking while cutting... will order another when the Infinity Pro comes in. Thanks much Buzz
Pretty close match, color-wise, with the black. Haven't seen the silver yet. Here's as close-up as I could get:
Note that I've already tinted this M1A1. It comes from NotCigs with a clear tube. Can also see where I've notched the 901 to 801 adapter for the Fusion cartos. That way I don't have to take the o-ring of the Buzz when switching between slotted 808 carto/901 atty and the tank with a Fusion. Makes the airflow much better with the tank.
Pretty close match, color-wise, with the black. Haven't seen the silver yet. Here's as close-up as I could get:
Note that I've already tinted this M1A1. It comes from NotCigs with a clear tube. Can also see where I've notched the 901 to 801 adapter for the Fusion cartos. That way I don't have to take the o-ring of the Buzz when switching between slotted 808 carto/901 atty and the tank with a Fusion. Makes the airflow much better with the tank.
What did you use to tint it....Night Shades?
It was just a tinting sheet I got with another vendor's tank. I'll shout if I find a place that sells them direct. Maybe a hobby store?
Absolutely loving the fusion/1" combination. Easily running seven hours between top offs, it is so nice to just cruise along vaping, every hit is good 
well.. I got my m1a1 this afternoon.. dremeled my last fusion, put it all together and loded it with my cinnamon death mix.. BLISS!! then my father and I went to dinner, came out, came home.. when I got home, I noticed the tank looked like it was cracked.. sure nuff.. from the bottom of the screw hole, down to the bottom of the tank.. damnit. it also turned the inside of the tank milky. I discovered that a 12ml syringe is about the same ID as the tank.. so I'm gonna try using that. I tried to IM mike, but no response yet.. damn. oh well..
Probably the cinnamon juice. That will crack a tank, so will banana. I tripped and fell off the forth step up onto the cement and as I layed there in pain I figured out the reason it hurt so bad was because my Buzz Pro and M1A1 tank was in my pocket and I landed right on them. I could barely walk for 2 days and my thigh had a bruise about the size of the box the Buzz came in. But guess what? The Buzz pro and the M1A1 tank were fine. A little bent but nothing else. If it didn't break there I'm sure it would last about anything except chemicals.
I'm sure it's the cinnamon. malic acid. so I just cut up a 12ml syringe, drilled a hole for the screw.. put it all back together, and VIOLA!! all better.
Damn this is the first one we have had do this ! I did not test the material because the data sheet said it could handle caustic acids ! I guess you are vaping some .... there Jag LOL !
let me know what you want to do , replacing the tube will most likely not be very helpful
Jag, just out of curiosity...what flavorings do you use for your cinnamon death mix? If it's a secret recipe I understand if you don't want to share...or PM me. What a bummer about your tank cracking.
5C...OUCH!! I hope your leg is feeling better, and glad your BP and tank survived!
5C...OUCH!! I hope your leg is feeling better, and glad your BP and tank survived!
I haven't used any cinnamon in my mixes in quite awhile now, but I just wanted to know what to avoid for my tanks. Thanks Jag. Still sorry about yours tho!
I am going to get some tubing that the syringes are made from and send it to Jag to KILL ! LOL
****LOL**** No offense, but that's why I haven't ordered any M1A1 tanks yet. I vape a lot of acidic and "Jolly Rancher" type flavors. I wanted to hear some feedback...
Coolcart seems to be working nicely with the tank (it was time to change out the fusion).
The short tank works nicely with the bp, just top it off a couple times during the day, painless. I'm not bothering to use the screw hole, I just slide the tank up and fill from the top; probably shorten the life of the orings a little, but they are replaceable, this is fast and convenient.
The short tank works nicely with the bp, just top it off a couple times during the day, painless. I'm not bothering to use the screw hole, I just slide the tank up and fill from the top; probably shorten the life of the orings a little, but they are replaceable, this is fast and convenient.
the 12 ml syringe tubes are exactly the same size as the m1a1, but don't drill a hole in it for the screw.. it'll make it leak, this I know from experience. I'm actually using the tube from the "filler" syringe that came with the repair kit I bought with it.
- Status
Similar threads
- Locked
