They should work great on that beautiful blue 14650 I saw today!
THE Phoenix Line is here & up for SALE. both phoenix xl & 3ml tank version,bottom coil, 2 ohms for both
- Thread starter badkolo
- Start date
- th_trl_thread_readers 0
- Status
They should work great on that beautiful blue 14650 I saw today!
I will go to the desktop and send a PM. I typed the whole message twice on the IPAD and lost it in a freeze up.
I'm gonna take my Phoenix into the computer room and type
. Thanks for the shout out!I will go to the desktop and send a PM. I typed the whole message twice on the IPAD and lost it in a freeze up.
I'm gonna take my Phoenix into the computer room and type
Ahhhhhhhh, there's your problem. Ipad. Get rid of the bad apple and get an Asus.
Yep, that's what I'm doing once in a while. I can't say that it makes a huge difference, but it speeds things up. I just would rather not pay so much deliberate attention to my vapage.
But on good hits, the taste really is great.
I ordered the 3mL Phoenix, but got the 1.5mL instead. Bad fixed me up and is sending out the 3mL's. I was out of cartos so had to open 1 pack.
I filled the first with a 50/50 caramel juice. I'm getting dry hits with consistency - about 1 out of every 3 hits. I have to take a couple primer puffs to get it wicking again. I'm getting pretty good flavor so far. The second I filled with a 50/50 vanilla based juice. It vaped like a champ, but the taste was GOD AWFUL! I thought maybe it was my juice, so I tried it in an atty and it was good ... So not sure what was going on? The third one I filled with a 70 PG /30 VG chocolate mix. This one is vaping well and is giving great flavor! No dry hits either. I am using a kGo battery for all of these.
So far I am feeling pretty good about these and am looking forward to the 3mL's coming my way. The only downside so far, for me is the whole syringe thing. I really do hope they work out a way to apply the "easy fill" system to these!
For me, the key seems to be higher PG juices - anything with more than 30% VG is going to require primer puffs in between vapes - which is definitely a bummer if you are a chain vaper!
I filled the first with a 50/50 caramel juice. I'm getting dry hits with consistency - about 1 out of every 3 hits. I have to take a couple primer puffs to get it wicking again. I'm getting pretty good flavor so far. The second I filled with a 50/50 vanilla based juice. It vaped like a champ, but the taste was GOD AWFUL! I thought maybe it was my juice, so I tried it in an atty and it was good ... So not sure what was going on? The third one I filled with a 70 PG /30 VG chocolate mix. This one is vaping well and is giving great flavor! No dry hits either. I am using a kGo battery for all of these.
So far I am feeling pretty good about these and am looking forward to the 3mL's coming my way. The only downside so far, for me is the whole syringe thing. I really do hope they work out a way to apply the "easy fill" system to these!
For me, the key seems to be higher PG juices - anything with more than 30% VG is going to require primer puffs in between vapes - which is definitely a bummer if you are a chain vaper!
I feel like I could give the phoenix to a new vaper and tell them to just fill and put it on an ego batt. No modding. That's what I wanted. I have no problem modding but, my friends do. I can't tell you how many people went back to analogs because they didn't want to mod or couldn't get them working right. This will work.
i wonder if they end up making bigger/loser wicks and holes for vg heavy juices. the reason im thinking along those lines is because if you make these to work properly for 80pg/20vg, it seems 100% vg juices wont wick. if you make it for 100%vg, then the pg heavy juice will flood the wicks.
would it make sense for them to make these for 2 different juice types? any thoughts?
would it make sense for them to make these for 2 different juice types? any thoughts?
I've been using a 3 ml all day and it has worked great so far! I use 80-20 PG so I don't know how they work with higher VG but works very good with my juice. I sure hope they get the replacement tanks for them because I think this one is going to be a keeper! I have a few of the sleeves for the ce2 Humongomizer and they are interchangeable.
Last edited:
Yep, that's what I'm doing once in a while. I can't say that it makes a huge difference, but it speeds things up. I just would rather not pay so much deliberate attention to my vapage.
Also, just taking a harder draw helps wicking, suck on that little guy nice and hard. That sounds dirty but, do it. It works, at higher voltages I make this thing wistle and it works great!
I received the wrong size also. I think it's a little funny we both live in Phoenix....and got the wrong Phoenix!
My first one was DOA, so I was not happy 2nd and 3rd work good. The thing that is hard to swallow is they don't work well at high voltage. I got the 2.6-2.8. On my Provari, They dry hit after a few vapes above 4.6ish. at 3.9 they work real good so far. I was under the impression that I'd be able to go to 5volts with these. The thing is , you don't need to. At 3.9 volts they perform well. To early to tell forsure but, if they have a decent life span I will reorder for sure.
Agreed, high voltages are causing wicking problems but at the 3.7 - 3.9 range they work great and provide a great vape! No need for 5-6v imho.
Where did we get you?
"Weak Sauce"... That is Hyst-ter-rick-el (sp?)
I take no credit for weak sauce, old term I picked up in the gaming world. But thanks anyway! Still trying to empty this viva nova... Thanks again bad for hooking me up! No more MiT products for me ever. None of these are MiT, are they?
Not to mention it's fun to watch the bubbles go up after every vape. Kinda like a lava lamp.
Last edited:
My GF doesn't smoke or vape but she loves this.
Also, chewy mouth pieces, I like them.
Last edited by a moderator:
I got my 2 boxes of the Phoenix today. 1st one I filled and the flavor was a bit muted. I drained it and reseated the metal post. That fixed it! It has been working great ever since I refilled it. I openned 3 more and before filling them I took the metal post and reseated it. They work flawlessly now! I am using 60% PG /40% VG. The flavor is great and vapor and throat hit are awesome!
Chris do NOT change a thing on these! The Phoenix is the best poly fill free carto I have ever used!!! I just ordered 2 more boxes. I ordered a box of 2.4-2.6 and 2.6-2.8 last week. The 2.4 - 2.6 ones seem to work slightly better than the 2.6-2.8. I have no idea way as I am using my Darwin set at the same watts setting.
For those that are having issues try re-seating the metal post and make sure to fill completely (until you see the juice cover the wick slots) and up side down.
Chris do NOT change a thing on these! The Phoenix is the best poly fill free carto I have ever used!!! I just ordered 2 more boxes. I ordered a box of 2.4-2.6 and 2.6-2.8 last week. The 2.4 - 2.6 ones seem to work slightly better than the 2.6-2.8. I have no idea way as I am using my Darwin set at the same watts setting.
For those that are having issues try re-seating the metal post and make sure to fill completely (until you see the juice cover the wick slots) and up side down.
Just finished my first fill on one these things are great. Almost to good I'm going to have to mix up some weaker liquid, 24 mg in these went strait to my head. I cant remember the last time that happened.
- Status
Similar threads
- Locked
- Locked
- Locked
- Locked
