Tricked out Pico, huh? I wonder if you could get a dna 60 in one of those?
Nice wrap. It looks like a nice texture to hold.
Nice wrap. It looks like a nice texture to hold.
The Womper Woom, Womp it again Sam.
- Thread starter Lessifer
- Start date
- th_trl_thread_readers 0
- Status
What tank are you putting on there?
My old faithful out and about Super Tank Mini in Royal 24K Gold Plated with a matching gold Tobeco 0.5ohm coil. Flavor is great, never leaks and well, pop the coil in and vape, those coils usually last around 3 weeks each, there great at 60w. Just wanted something I could throw in my pocket but also look cool.
The other tank I'm waiting for is the new Griffin 25 Plus, interested in trying that new deck design..
Tracking on the SW mod updated too and I saw the new 3s3p custom maxamps 4500mah 11.1v lipo in it, I had to laugh at that, has to be the most tricked out (I stole your word) DNA 250 on the planet. (maybe)
How about this gold one? Dotmod RTA Tank. Only 2 ml though.
I never knew the Super Tank mini came in gold too. Then again, I don't know a lot about the super tank, but maybe I should. My problem is every time I see STM, I don't know if it's the subtank mini or the super tank mini.
And a gold coil? Those really exist? Doesn't it get expensive tossing out a gold coil every three weeks? I guess it's kinda like my daughter losing a set of earrings once a month, but thankfully she's past that stage now.
I never knew the Super Tank mini came in gold too. Then again, I don't know a lot about the super tank, but maybe I should. My problem is every time I see STM, I don't know if it's the subtank mini or the super tank mini.
And a gold coil? Those really exist? Doesn't it get expensive tossing out a gold coil every three weeks? I guess it's kinda like my daughter losing a set of earrings once a month, but thankfully she's past that stage now.
They are great tanks and the coils are cheap, not sure how long they will be available, the gold ones are a pound extra for 5 but when the juice is in you can't really tell if it's gold or silver, especially with my custard juices.
It's a great tank though..
How many watts??
If 40w will do I's say the Hcigar VT40.
Otherwise the Triade is one sweet piece.
Rixsta my wife has a gold 25mm STM on her gold Sig 213. GReat looking unit. She got the gold coils as well.
The HΩ Wrecker G2 is a really solid well made mod. Machined case and battery sled with top notch spring contacts that won't tear battery wraps. Flush mounted 510 connector and metal face buttons.
Hohm Wrecker G2 | Hohm Tech, Incorporated - Hohm Tech, Incorporated
The box style design and machined case symbols are a bit of a turn off for some.
Hohm Wrecker G2 | Hohm Tech, Incorporated - Hohm Tech, Incorporated
The box style design and machined case symbols are a bit of a turn off for some.
nice lookin! Bumblebee hehehe forget who said that, but it was cute.Pico tron anyone ?
watched a vid on those........fell in love with the purple ostrichy lookin leather, but way too rich for my blood. Lots of things I need to spend 160.00 on before that if I had it
@Boden Science question? All things being equal, same mod, same topper, same battery, same wire coil, looking at voltage settings & Looking at battery life. If I am running a 33 gauge coil at 2.4 ohms and 3.4 volts, 4.82 watts, compared to running a 1.8 ohm coil at 3.0 volts, 5.00 watts, will the battery last longer at the lower volts even though the watts are about the same? Not a womper question, just a science question. Thanks 
I'm sure Boden will correct me if I'm wrong, but no, voltage doesn't matter in this case, only wattage does. The more watts, the faster the battery drains.@Boden Science question? All things being equal, same mod, same topper, same battery, same wire coil, looking at voltage settings & Looking at battery life. If I am running a 33 gauge coil at 2.4 ohms and 3.4 volts, 4.82 watts, compared to running a 1.8 ohm coil at 3.0 volts, 5.00 watts, will the battery last longer at the lower volts even though the watts are about the same? Not a womper question, just a science question. Thanks
Question for anyone who might know:
Today Lannie made two coils for her (darn, forgot the name) tank. They both have the same diameter and the same number of turns. She installed them and the screws are tight. That is, none of the coil ends are loose. She couldn't get an Ohm reading that stayed the same twice, so she asked me to look at it. Both coils look good and I verified that neither coil is shorted. Nothing is touching ground on any part of either coil (except the lead that is supposed to be grounded). I tapped the fire button and got a reading of 0.67, then 1.12, then 0.86, then 0.98, then 1.20... I unscrewed it and tightened the adjustable screw in the end of the 510 thread. Reassemble. Same problem. I fired it to make the coils glow. One got very hot very quick, then the other gradually came up to speed, but never matched the first coil before I let go of the button. I put the coil shield on and verified that neither coil touched it and tested the Ohms readings again with the same result, though all readings were higher this time.
Best guesses???
Today Lannie made two coils for her (darn, forgot the name) tank. They both have the same diameter and the same number of turns. She installed them and the screws are tight. That is, none of the coil ends are loose. She couldn't get an Ohm reading that stayed the same twice, so she asked me to look at it. Both coils look good and I verified that neither coil is shorted. Nothing is touching ground on any part of either coil (except the lead that is supposed to be grounded). I tapped the fire button and got a reading of 0.67, then 1.12, then 0.86, then 0.98, then 1.20... I unscrewed it and tightened the adjustable screw in the end of the 510 thread. Reassemble. Same problem. I fired it to make the coils glow. One got very hot very quick, then the other gradually came up to speed, but never matched the first coil before I let go of the button. I put the coil shield on and verified that neither coil touched it and tested the Ohms readings again with the same result, though all readings were higher this time.
Best guesses???
Could be many factors, tighten down your screws and make sure both coils have the same amount of wraps. Symmetry is the key to a balanced build, pinch them while they glow with tweezers, strum them... Making sure both coils don't have gaps and the position of the coils are the same. Or they may be over tightened and the screw has cut into the wire, it does happen, sometimes I can't figure it out, my best advice, start again with fresh wire.
- Status
Similar threads
