The Womper Woom, Womp it again Sam.
- Thread starter Lessifer
- Start date
- th_trl_thread_readers 0
- Status
Absolutely Primo Looking GMv2!After seeing @TrollDragon Goblin I took inspiration and gave it a kelper 510 heatsink adapter and a matching drip tip one, super cool !!
There is no doubt in my mind Lannie that this rta was made for you
I MUST have that DT and Heat sink, do you have a link for them?
Cheers!
Thanks to you really, if I hadn't of seen your post I would never of got the ideaAbsolutely Primo Looking GMv2!
I MUST have that DT and Heat sink, do you have a link for them?
Cheers!
These are obviously UK retailers but I bet you can find them elsewhere, anyway, this is where I got them from..
Drip Tip - DotMod Full size friction fit V2 (V2 is smaller in height)
DotMod Full Size Friction Drip Tip - DotMod - Vanilla Vapes UK
Drip Tip heatsink by UD, comes in a nice little box and the one pictured is the old one, they havn't updated their website as it now has two O rings and fits perfect in the Goblin.
Drip Tip Heatsink By UD
You will fall in love with Goblin Mini 2, you like the Isub G, then you will love this, the airflow is restricted and I should hate it but it is so smooth, any airier and it would ruin the tank.
I was in flavor town yesterday but I'm in Flavor City today, it probably isn't fair to compare it to the big 25mm ones, different beasts and you have to build bigger to get the flavor but they just cannot match this for flavor.
Also to compare it to the Serpent mini I dont feel comfortable doing that, the Serpent mini for a single coil is great but if I had to choose one, I would take the Goblin everytime, even building a single on the Goblin. I know for a fact that I'll use this the most. It is No1 on my list for flavor, out of everything I own...end of...
I built a dual 27g SS 316L 10 Wraps 2.5mm 0.4ohm at 45w (I turned it up from 38, it can def go higher too) and wicked it just like Nick did but I used cotton bacon which I also love, no leaks, no dry hits, I have been so happy this week vaping these little gems, I kinda feel stupid missing out on these but better late than never. Thick dense yummy vapor.
After seeing @TrollDragon Goblin I took inspiration and gave it a kelper 510 heatsink adapter and a matching drip tip one, super cool !!
There is no doubt in my mind Lannie that this RTA was made for you
You are SOOOOOO lucky I hadn't ordered what was in my Fasttech cart yet! I'ma have to go switch now. I'm getting the Goblin mini clone, by the way, with the heat sink. I don't know about the drip tips because there were so many to choose from, and I didn't know what the different kinds were and whether they'd fit. I guess if they're "510 drip tips," they'll fit. I should look for 510 Delrin drip tips, then, huh?
And by the way, I can't believe I typed "their" instead of "there" in that post I made earlier. DEFINITELY didn't have enough coffee in me yet. That's the first time (to my knowledge) I've ever done that. I fixed it, but you've quoted it to preserve my boo-boo for all eternity.
Any juice is better with a little whipped cream added. I do love that flavor.
I can't wait to try this one. I'm gonna go ahead and use my cantaloupe, though, because I LIKE cantaloupe! (And your second flavor should be Honeydew Melon, not Honeydew Watermelon, in case anyone was confused...)
OMG, those Dotmod drip tips are $25.00 EACH. 
They're very pretty, but all I could find were anodized aluminum ones, and well, they're way out of my price range. I'll have to just be happy admiring Rixy's drip tips.
They're very pretty, but all I could find were anodized aluminum ones, and well, they're way out of my price range. I'll have to just be happy admiring Rixy's drip tips.
You are SOOOOOO lucky I hadn't ordered what was in my Fasttech cart yet! I'ma have to go switch now. I'm getting the Goblin mini clone, by the way, with the heat sink. I don't know about the drip tips because there were so many to choose from, and I didn't know what the different kinds were and whether they'd fit. I guess if they're "510 drip tips," they'll fit. I should look for 510 Delrin drip tips, then, huh?
And by the way, I can't believe I typed "their" instead of "there" in that post I made earlier. DEFINITELY didn't have enough coffee in me yet. That's the first time (to my knowledge) I've ever done that. I fixed it, but you've quoted it to preserve my boo-boo for all eternity.
Any juice is better with a little whipped cream added. I do love that flavor.
Make sure it's the V2 one.....and oh yeapers I added water to the honeydew, silly me
I am so lucky, yes indeed, nobody wants the wrath of Lannie
Hugs
Yes they are expensive but I love em, they feel so nice on da lips, the clone ones are rubbish.OMG, those Dotmod drip tips are $25.00 EACH.
@Rixsta or anyone else who has one of these Goblin minis, can you please tell me which one of these multitude of tanks is the best match?
FastTech - Gadgets and Electronics
I know definitely not the acrylic tank ones, but there are regular Goblin mini clones, then there are V2 clones, and I don't know which replacement glass fits which tank (and I'll need a few replacement glass pieces), then on page two or three they start over with the Goblin mini again (not saying V2), but different prices, and I don't have a clue which ones to get. Help? Pretty please?
OK, I just saw your post above saying to get the V2 and I do have two of those in my cart already, but I'm not sure which glass fits them. When I try to compare measurements, the tank description gives the overall tank dimensions, and the replacement glass just gives the glass dimensions, so I'm not clear on the height. I know sometimes glass is taller or shorter from one version to another, even if the diameter is the same. And then I saw the gold-finish ones on page three, but that's not V2. I only made it to page three... Gotta go do something with all that milk now...
FastTech - Gadgets and Electronics
I know definitely not the acrylic tank ones, but there are regular Goblin mini clones, then there are V2 clones, and I don't know which replacement glass fits which tank (and I'll need a few replacement glass pieces), then on page two or three they start over with the Goblin mini again (not saying V2), but different prices, and I don't have a clue which ones to get. Help? Pretty please?
OK, I just saw your post above saying to get the V2 and I do have two of those in my cart already, but I'm not sure which glass fits them. When I try to compare measurements, the tank description gives the overall tank dimensions, and the replacement glass just gives the glass dimensions, so I'm not clear on the height. I know sometimes glass is taller or shorter from one version to another, even if the diameter is the same. And then I saw the gold-finish ones on page three, but that's not V2. I only made it to page three... Gotta go do something with all that milk now...
The V1 glass fits the V2, they are the exact same size Lannie That's why you wont see any V2 glass...
That's why you wont see any V2 glass...
This one here is your best choice.
UD Goblin Mini V2 - T-VCT, Goliath, Zeph... - Youde UD, OBS - Tanks & Coils
Much Thanks!!Thanks to you really, if I hadn't of seen your post I would never of got the idea
These are obviously UK retailers but I bet you can find them elsewhere, anyway, this is where I got them from..
Drip Tip - DotMod Full size friction fit V2 (V2 is smaller in height)
DotMod Full Size Friction Drip Tip - DotMod - Vanilla Vapes UK
Drip Tip heatsink by UD, comes in a nice little box and the one pictured is the old one, they havn't updated their website as it now has two O rings and fits perfect in the Goblin.
Drip Tip Heatsink By UD
Now to find them on this side of the pond!
Last edited:
Early days but I have put 8 tanks through mine and not a single drop, not had any condensation build up either but I expect a little at some point due to the way the airflow is designed. With the wicking method I mentioned before, it does not dribble (yet), slight gurgle for a few vapes when refilled but that's it.. unlike it's owner who is out on the town tonight and will be dribbling for some kebab later
don't like that. I know some talked about fussy wicking where they didn't git leaks, but I hate fussy wicking. Now I need to re-read all the heat sink stuff that I skipped over, don't have a clue what those are. Might just stick with a serpent mini and be happy. lol
you dribble and they feed ya?? hehehe Have fun......but not too much fun!!unlike it's owner who is out on the town tonight and will be dribbling for some kebab later
Agreed, I got to play with one for a week or so and it was a bit... Moody.
No leaks, no leaks, puddle around 510, no leaks, juice all over mod, no leaks.
VIP room at the club, just friends, no trouble, no idiots and we can vape in there and get table service. Oh I'll have fun.. I usually end up dancing which always gets people saying those two words.....oh no
- Status
Similar threads
