For a list of Golden Greek authorized sellers see:
GG Wiki
But you can also ask in this thread jesseseetai from futuremodshop.com (US authorized seller)
USA GG Store Order List
Fasttech is a clone.
Tilemahos new rebuildable part (springomizer)
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
For a list of Golden Greek authorized sellers see:
GG Wiki
But you can also ask in this thread jesseseetai from futuremodshop.com (US authorized seller)
USA GG Store Order List
Fasttech is a clone.
are you looking for just the springomizer or a completely Tilemahos?
Sent from my iPhone using Tapatalk
"Complete tile with springomiser. No need for the original deck."
Tile X1 has yet to be released.
Shortly, shortly.
cheers
I
Tile X1 has yet to be released.
Shortly, shortly.
cheers
I
I was told the X1 shipped to resellers something like 2 weeks ago. Are they being shipped with camels?
I just wanted to share in case someone have been having wicking problems with his Springomizer, as I was having.
I exprimented with a lot of variations (using cotton and rayon), as cutting the wick flush with the channels, some wick down channels, cutting the wick leaving the channels completely free, using different amounts of wick. At the end with the same results, dry hits, or flooding, very inconsistent resuts.
In the pictures I used the usual amount of wick, no too tight nor too loose in the coil, but instead of cutting it flush with the channels, I left a lot of wick and placed it inside the gap that is left between the terminals and the housing.
You can see in the pictures the amount of wick I placed inside the gap, the result:
consistent liquid supply, improved flavor, no flooding, no dry hits, with the juice control opened 1 turn or 1 1/2 turns.
I call it the "Leia wicking".
I exprimented with a lot of variations (using cotton and rayon), as cutting the wick flush with the channels, some wick down channels, cutting the wick leaving the channels completely free, using different amounts of wick. At the end with the same results, dry hits, or flooding, very inconsistent resuts.
In the pictures I used the usual amount of wick, no too tight nor too loose in the coil, but instead of cutting it flush with the channels, I left a lot of wick and placed it inside the gap that is left between the terminals and the housing.
You can see in the pictures the amount of wick I placed inside the gap, the result:
consistent liquid supply, improved flavor, no flooding, no dry hits, with the juice control opened 1 turn or 1 1/2 turns.
I call it the "Leia wicking".
Great Ariel 
Also, the new housings with 4mm channels are almost ready and they will be available for new and old users very soon for only 3 euros
Also, the new housings with 4mm channels are almost ready and they will be available for new and old users very soon for only 3 euros
Last edited:
Imeo do these new housings work with the normal V2 build deck assembly ??
alan
alan
They are identical and the only difference is on the channels. They are compatible with all the known parts Alan
Thanks Imeo can you say which vendors will be stocking themThey are identical and the only difference is on the channels. They are compatible with all the known parts Alan
Alan
Great Ariel
Also, the new housings with 4mm channels are almost ready and they will be available for new and old users very soon for only 3 euros
4 pieces the new housing for me, please.
Because I have 4 springomizers today, but I do not know how many springomizers I will have tomorrow.
You have to take the same number of housings as your springomizers are buddy. As for the springomizers that you will own in fiture, there is no problem because all of them will have the updated housing
Just wanted to add my two cent's and this is just my observation using the v2+ housing with the 4mm channels and some tiger wire and rayon wick (cellucotton) has given me the best tasting vape to date. Wrap the wire 28awg*2*ribbon*5m twisted kanthal (3 wires) around a 5/64 punch down tool (or 2mm rod) wick not to tight cut even at the channels is great. I vape mouth to lung gives off good vapor great taste!
glad to hear that Adam. Thats exactly what I am going to do. 4mm channels to all springomizers
I don't know why 1mm makes so much difference but it does to me. It may allow a little forgiveness when wicking, I find the tiger wire because it is twisted acts as a wick of sorts as well. If you ever have the opportunity to try it you should. with all the ceramic coils out now its still depends how well it wicks. A wickless RTA would be what is next? Thanks Adam
- Status
