Titanium Eclipse RDA
- Thread starter ukeman
- Start date
- th_trl_thread_readers 0
- Status
Spec:
Technical data:
Material: titanium.
Diameter:22 mm.
Height (without connector and drip tip): 22 mm.
the volume - 1.5 ml.
Leg Height 8mm.
Duct Height: 6mm.
1.6mm internal diameter ducts.
The openings adjustable airflow (2-1,5-1).
Materials: titanium, bronze.
polishing.
Weight: 19 gr.
How it works: dripper
I like that bottom-fed airflow being introduced into a standard 3-post dripper like this. I wonder what those insulators are made of. It doesn't appear to come with replacements (not that I will be melting any insulators).
D'oh! I was looking at the price as if it were dollars. Just out of my range for today (bought another dripper).
Technical data:
Material: titanium.
Diameter:22 mm.
Height (without connector and drip tip): 22 mm.
the volume - 1.5 ml.
Leg Height 8mm.
Duct Height: 6mm.
1.6mm internal diameter ducts.
The openings adjustable airflow (2-1,5-1).
Materials: titanium, bronze.
polishing.
Weight: 19 gr.
How it works: dripper
I like that bottom-fed airflow being introduced into a standard 3-post dripper like this. I wonder what those insulators are made of. It doesn't appear to come with replacements (not that I will be melting any insulators).
D'oh! I was looking at the price as if it were dollars. Just out of my range for today (bought another dripper).
Last edited:
yes the cost is high but for the money its well worth it imo...
1. excellent design
2. durable as hell
3. lightest weight ever.
4. very classy look
When you compare their gear to an "exclusive" type grouping, which i kind of do, their beautiful atomizers are not priced in the outrageously high category and imo its because they make enough of them to satisfy the current wave of those interested.
but might be good for some to wait for the reviews
1. excellent design
2. durable as hell
3. lightest weight ever.
4. very classy look
When you compare their gear to an "exclusive" type grouping, which i kind of do, their beautiful atomizers are not priced in the outrageously high category and imo its because they make enough of them to satisfy the current wave of those interested.
but might be good for some to wait for the reviews
got my paypal invoice today!
the price is very steep, i guess with shipping from Ukraine and all, but i figure its my shot at what theoretically could be a killer RDA and I've not been disappointed.
115 euro...
what i like is the coils/air posts will be offset from the d/t for drip filling.
the price is very steep, i guess with shipping from Ukraine and all, but i figure its my shot at what theoretically could be a killer RDA and I've not been disappointed.
115 euro...
what i like is the coils/air posts will be offset from the d/t for drip filling.
Got my Eclipse in to compliment the Prometey2 and the Achilles...
Hasn't even broken in the wicks / coils (duals) but I will tell you right now, this beats any dual coil RDA I've tried (most of the latest) for flavor and of course vapor up the ying yang.
I've come to love the Achilles as much as the P2, and so far (10 minutes in)... I'm feeling it (Ukraine Modders Titanium Love)
Pros:
Comes with 2 top caps (brass or silver) +1, a mixed brass / silver straight tube D/T +1, 2 AFC rings (brass/silver).
At the widest air hole, its perfect for me, but maybe a tad under what cloud chasers prefer.
Short dome (about 3mm shorter than the Achilles) condenses vapor for flavor.
Dual air posts - offset from the d/t so easy to redrip.
Deep 4mm well.
Cons: not a lot of space to put your coils in and no wire holes in posts; its a bear to set up imo. ymmv.
I barely got 2 x 8 wrap 26g nichrome standard micro ID coil and Pima Sliver cotton... .33 ohms.
At 3.8v on my Raptor chip box... its awesome.
this beats the Magma, the Zentih2, Veritas, Plume V, and Origen imo... in the flavor dept.
Hasn't even broken in the wicks / coils (duals) but I will tell you right now, this beats any dual coil RDA I've tried (most of the latest) for flavor and of course vapor up the ying yang.
I've come to love the Achilles as much as the P2, and so far (10 minutes in)... I'm feeling it (Ukraine Modders Titanium Love)
Pros:
Comes with 2 top caps (brass or silver) +1, a mixed brass / silver straight tube D/T +1, 2 AFC rings (brass/silver).
At the widest air hole, its perfect for me, but maybe a tad under what cloud chasers prefer.
Short dome (about 3mm shorter than the Achilles) condenses vapor for flavor.
Dual air posts - offset from the d/t so easy to redrip.
Deep 4mm well.
Cons: not a lot of space to put your coils in and no wire holes in posts; its a bear to set up imo. ymmv.
I barely got 2 x 8 wrap 26g nichrome standard micro ID coil and Pima Sliver cotton... .33 ohms.
At 3.8v on my Raptor chip box... its awesome.
this beats the Magma, the Zentih2, Veritas, Plume V, and Origen imo... in the flavor dept.
Last edited:
Uke, is that pic in the first post a good indicator of what it looks like under the hood?
other than the insulators at the air posts ( don't remember seeing those now that its tucked away ) and i think i saw one at the pos post though...
yes.
very small area to work with but I will deal - with practice.
FYI I'm not a big dual coil guy, because imo a good single will give better flavor, but I do like the Origen2 b/f for flavor, and the Magma (under coil air) too. This one started out a bit better right off the bat.
But neither as good flavor as Achilles or P2 single coil atomizers.
Could be the new coil needs to oxidize a bit.
Look for a follow up in a few days.
Uke
yes.
very small area to work with but I will deal - with practice.
FYI I'm not a big dual coil guy, because imo a good single will give better flavor, but I do like the Origen2 b/f for flavor, and the Magma (under coil air) too. This one started out a bit better right off the bat.
But neither as good flavor as Achilles or P2 single coil atomizers.
Could be the new coil needs to oxidize a bit.
Look for a follow up in a few days.
Uke
I want this thing. I want it bad. And I want to make it a BF atty. wow this is a beautiful atty. I may just get this thing for times when I wanna manually drip on my reo.
Last edited:
there's a member named Chowderhead here who converts RDA to b/f....
sounds like an awesome idea. I just sent him a Magma.
http://www.e-cigarette-forum.com/fo...-supplier-forum/581604-catfish-atty-mods.html
Think anyone could post some pictures of this thing in action? Other than vendors photos though 
Fugly coils, but with 26g wire its not the easiest to secure in the small space and screw tip.
so easy to drip and holds a good ml. up to 30 drops and the wick stays above the juice. Under coil air posts really make the flavor shine in all that vapor...
and Titanium is light as a feather and durable as hell.
My only concern about converting it is "where to put the juice hole"... if its on the base, so that it soaks the wick from the tails and up, it may be less than thorough.
I usually like to tilt the atty when its not full just to make sure the wicks are wet (at anything under .6 or .7 ohms)... so squonk and tilt may work.
If the juice hole was put further up the pos post so some juice gets on the coil/wick each squonk, then thats better ( the juice will not drain from the bottom that way either)
the Origen b/f juice hole is up at the coil level so it soaks the coil then goes down to the well.
The Magma is going to have a high juice hole too.
The problem with juice well in the atty is that when it gets hot the juice in the well gets hot.
If the juice is coming from bottom of well it will NOT get hot because it will drain back to bottle, BUT the coil/wick will be way above the juice so wicking could be an issue.
Chowderhead put the juice hole up near the coil so each squonk will soak the wick; and the well is irrelevant for most part; but the advantage with these is the air under the coil.
I haven't tried it but, I genuinely think that feeding with a good squonk to the Magma will soak the wick tails enough from the bottom, it wicks well even with the last drop of loose juice in the well even from cold first thing in the morning.
Just following up; this baby fulfills all expectations.... and more if you like a ton of vapor with your flavor.
but that's me; I am not used to liking the big clouds, less flavor RDA's.
The Magma is pretty great too; haven't spent enough time with it because its coming back from being b/f'ed.
I get more flavor from single coil and decent air... but so far the Eclipse is the best for dual coil and decent air RDA's (with air under coil lol)
but that's me; I am not used to liking the big clouds, less flavor RDA's.
The Magma is pretty great too; haven't spent enough time with it because its coming back from being b/f'ed.
I get more flavor from single coil and decent air... but so far the Eclipse is the best for dual coil and decent air RDA's (with air under coil lol)
- Status
Similar threads
