Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
This may not be small enough but I am really liking it. It is a bit taller than a pico 75w and slimer.
$29.08 Authentic Wismec SINUOUS P80 80W TC VW APV Box Mod - 1-80W / 100-315'C(200-600'F) / 1*18650 at FastTech - Worldwide Free Shipping
This may not be small enough but I am really liking it. It is a bit taller than a pico 75w and slimer.
$29.08 Authentic Wismec SINUOUS P80 80W TC VW APV Box Mod - 1-80W / 100-315'C(200-600'F) / 1*18650 at FastTech - Worldwide Free Shipping
I’m in the market for a new mod (or 3!), so I’ll use your link, as so far, I’m happy with the Wismec brand (and will never purchase smok mods again, they’re crap, IMO)
I’m doing all sorts of searches for tiny mods like the iCare mini and I’m not seeing any others that are as small. Is this the only one ?(I’m not interested in something like a Blu)
I stumbled across this a while ago:
It's a pod based device for $75-$100 USD. Seemed excessive but it looks pretty sharp. I wouldn't pay that much for what the device does, but I guess some might for the style of it if the quality is very high.
Asvape Defender AIO Ultra Portable System | Ultra Portable Kits
It's a pod based device for $75-$100 USD. Seemed excessive but it looks pretty sharp. I wouldn't pay that much for what the device does, but I guess some might for the style of it if the quality is very high.
Asvape Defender AIO Ultra Portable System | Ultra Portable Kits
Also, I’m loving the look of the pink penguin (even though batteries aren’t replaceable. It’d be a good car mod). The coils for it sure look different. $8.35 Authentic Joyetech ATOPACK JVIC3 MTL Coil Head (5-Pack) 5-pack - 1.2ohm / Joyetech Atopack Dolphin & Penguin & Penguin SE compatible at FastTech - Worldwide Free Shipping
I haven’t seen much talk on the forum about this mod. Is it decent or a disappointment?
I haven’t seen much talk on the forum about this mod. Is it decent or a disappointment?
I stumbled across this a while ago:
It's a pod based device for $75-$100 USD. Seemed excessive but it looks pretty sharp. I wouldn't pay that much for what the device does, but I guess some might for the style of it if the quality is very high.
Asvape Defender AIO Ultra Portable System | Ultra Portable Kits
How unique and cool looking! But pretty spendy!
SINUOUS P80 Mod dimensions are:
DEPTH 28.5 mm
HEIGHT 78 mm
WIDTH 33.5 mm
PRODUCT WEIGHT 97 g
The Atopack Dolphin Battery are
DEPTH 31.3 mm
HEIGHT 77 mm
WIDTH 48.5 mm
PRODUCT WEIGHT 70 g
It kinda looks like the wismec is just about the same size altho not quite as wide.
plus with the wismec you can use any tank. Up to 25mm
It is heavier but that is due to taking 1 18650 instead of an internal battery
the juul is about the same size as the icare. Also just remembered the my jet is also about the same size
If a transparent or translucent wrap, the spray adhesive isn't what you want. Maybe check some of the better hobby shops for glass paint? (For the outside only, of course!)
You can paint designs on the outside of glass tanks with nail polish. Use fine, thin art brushes if you have them rather than the nail polish brush. If you don't like how it turns out, you can remove the design with nail polish remover. If you love it, you can put a coat or two of clear nail polish over the design
A while back, I finally found a clearomizer that would work for my brother. But, he said that it provided more vapor than he was used to, which made the vapor too harsh. (He had been using a 306 and was no longer satisfied with the amount of vapor.) So, he needed to experiment with the amount of nicotine and maybe VG to make the vapor a little less harsh.
However, this all happened at the same time as his landlord died. Which meant the house he's renting was being sold, and he wasn't sure if he was going to have to move or not. Too much going on to worry about experimenting.
He had already gone back to smoking before all this. Now it's been almost a years since I found the best clearo for him (Joyetech Ego One tanks/Eggrolls). He's still smoking and hasn't gotten around to finding the right eliquid yet! I'm really concerned about him at this point.
So, I'm trying to figure out what eliquid to make for my brother. I'll do the experimenting FOR him.
His normal eliquid is Tobacco Blend 70%PG / 30%VG at 18+ mg/ml. That's the only flavor he vapes. He could vary the PG/VG ratio a little bit, and he could vary the nicotine strength some.
I can make a few variations for him to try. But, preferably not TOO many. I was thinking of trying 12 mg/ml and 9 mg/ml nic. And, I could try it at the same PG/VG ratio (70/30) and at higher VG (50/50). That's already 4 different experiments for him to try.
Does that sound about right? I don't want to make 20 bottles for him to try. But, I'm not sure if just 4 is enough of a variation. Any suggestions before I do this?
However, this all happened at the same time as his landlord died. Which meant the house he's renting was being sold, and he wasn't sure if he was going to have to move or not. Too much going on to worry about experimenting.
He had already gone back to smoking before all this. Now it's been almost a years since I found the best clearo for him (Joyetech Ego One tanks/Eggrolls). He's still smoking and hasn't gotten around to finding the right eliquid yet! I'm really concerned about him at this point.
So, I'm trying to figure out what eliquid to make for my brother. I'll do the experimenting FOR him.
His normal eliquid is Tobacco Blend 70%PG / 30%VG at 18+ mg/ml. That's the only flavor he vapes. He could vary the PG/VG ratio a little bit, and he could vary the nicotine strength some.
I can make a few variations for him to try. But, preferably not TOO many. I was thinking of trying 12 mg/ml and 9 mg/ml nic. And, I could try it at the same PG/VG ratio (70/30) and at higher VG (50/50). That's already 4 different experiments for him to try.
Does that sound about right? I don't want to make 20 bottles for him to try. But, I'm not sure if just 4 is enough of a variation. Any suggestions before I do this?
If I may be so bold...
T'were it me, I would try his "normal" ratio of 70/30 at 18mg, and I would do a simple unflaved. I know many who think they would never, just couldn't, don't want to, wouldn't like it...... but then, suddenly boom, after tasting it, are completely shocked that it's not only viable, but tasty!
T'were it me, I would try his "normal" ratio of 70/30 at 18mg, and I would do a simple unflaved. I know many who think they would never, just couldn't, don't want to, wouldn't like it...... but then, suddenly boom, after tasting it, are completely shocked that it's not only viable, but tasty!
But, he's tried 70/30 at 18 mg/ml. That's how he found out it was too harsh.
However, you are still right. There's no need to waste the flavoring and having to wait a month for a tobacco flavor to steep. Unflavored really is a good idea.
It could be. The experiments are interesting, and might be fun.
And his norm ratio with unflavored might have an end result that's actually less harsh.
And his norm ratio with unflavored might have an end result that's actually less harsh.
True. And, with unflavored it's not nearly as much trouble to make SEVERAL testers.
Similar threads
- Locked
