Tootle Puffers, Part Three! (The Sequel of the Redux)

[pufZeppelin]

Where do you usually like to buy?

after many trys with several vendors, my go to place now is:
- Wholesale Nicotine, Bulk e-Liquid, PG, VG and Supplies Heartlandvapes Wholesale

what sold me was I can vape their straight un flavored NIC , AND LIKE IT
so adding ANY flavor works out great...

good prices too...

 

[ChelsB]

after many trys with several vendors, my go to place now is:
- Wholesale Nicotine, Bulk e-Liquid, PG, VG and Supplies Heartlandvapes Wholesale

what sold me was I can vape their straight un flavored NIC , AND LIKE IT
so adding ANY flavor works out great...

good prices too...

Thanks, puf. Seeing as how I am just starting to build my stock I am always looking for different places to buy from, to see which I like the best and get the best deal.


Sent from my iPhone, please excuse any typos

 

[LynnNC]

Where do you usually like to buy?

I buy my nicotine from either Nicotine River, Nude Nic or Ecigexpress. Flavorings I get from various sources. Gear I buy at whoever has the best price for what I'm looking for her in the US.

 

[LynnNC]

after many trys with several vendors, my go to place now is:
- Wholesale Nicotine, Bulk e-Liquid, PG, VG and Supplies Heartlandvapes Wholesale

what sold me was I can vape their straight un flavored NIC , AND LIKE IT
so adding ANY flavor works out great...

good prices too...

Yep! They're good too. I stay away from NC vendors except BCV.

 

[Plettschner]

Congrats on vaperversity.

I am in love with tge Compact Kayfun in my avatar. It holds 2.5 mls, and is only 30 mm tall 22 mm wide 30 mm tall not counting drip tip and 520. Very good flavor.

You only need to get four pieces.

Kayfun lite plus base
Kayfun barrel
25 mm tall flat top bell cap
A drip tip.

Check my blog.

One entry is why i use a Kayfun.

Another has Links to FT where you can get spare parts.

The Kayfun in my Avatar is

$4.00 Kayfun lite plus V2 base
$1.69 flat top bell cap
A barrel usually $1.76. Tempoarily sold out when gathering Links. I did find a Nano chimney and barrel for a bit over $2.

The bell cap doesnt need any chimney because tge barrel screws directly into tge bell cap. Meaning pull tge build deck snd tweak build or change wick without dumping Juice.

If yoy prefer direct lung instead of the $4 lite plus V2 base get tge $4.11 Kayfun Monster Mini V3 base.

I have both bases and can switch as vaping needs change. In two words LOVE IT!

I'm just digging through this finally. Honestly, I have shied away from the Kayfuns due to how many different models and versions there are... a bit overwhelming. I've decided, I'm going to build your rig and give it a shot. It sounds like it works very well. I started poking at the links and around FT... holy rat butts, Batman, there are a TON of parts for these things! How can you know what parts fit with what other parts?

Anyway, I'm going to get the base you recommended, but, of course, in black. I'll probably get the same translucent tanks. Looks like I have to get the barrel/chimney set as the other barrel onlys are out of stock. Have you seen any black barrels anywhere?

 

[pufZeppelin]

yepper, buy a jug of NIC from them, them vape it straight up - it's good stand alone

 

[ChelsB]

after many trys with several vendors, my go to place now is:
- Wholesale Nicotine, Bulk e-Liquid, PG, VG and Supplies Heartlandvapes Wholesale

what sold me was I can vape their straight un flavored NIC , AND LIKE IT
so adding ANY flavor works out great...

good prices too...

Their shipping costs are pretty high. You wouldn't happen to have a coupon code for them would you?


Sent from my iPhone, please excuse any typos

 

[pufZeppelin]

Their shipping costs are pretty high. You wouldn't happen to have a coupon code for them would you?

nopie BUT if you register they send codes/sales SOMETIMES

the shipping is FREE over $75
or flat $8.50

 

[motordude]

Come on girl!
Just get the 55 gallon drum.

 

[Two_Bears]

I'm just digging through this finally. Honestly, I have shied away from the Kayfuns due to how many different models and versions there are... a bit overwhelming. I've decided, I'm going to build your rig and give it a shot. It sounds like it works very well. I started poking at the links and around FT... holy rat butts, Batman, there are a TON of parts for these things! How can you know what parts fit with what other parts?

Anyway, I'm going to get the base you recommended, but, of course, in black. I'll probably get the same translucent tanks. Looks like I have to get the barrel/chimney set as the other barrel onlys are out of stock. Have you seen any black barrels anywhere?

I LOVE this little Kayfun. Search back about 20-30 pages where i pointed out tge parts needed for the short Kayfun to Dancing Heretic and oplhilik.

If you can't find it PM me and I will get a parts list.

If you want direct lung instead of direct lung get tge $4.11 Kayfun Monster Mini V3.

I LOVE the short Kayfun.

Pull deck and tweak build without spilling Juice

Fill without squirting juice through fill port.

Less weight

Pocket Friendly.

I think tge flavor is better than a full sized Kayfun.

 

[Plettschner]

after many trys with several vendors, my go to place now is:
- Wholesale Nicotine, Bulk e-Liquid, PG, VG and Supplies Heartlandvapes Wholesale

what sold me was I can vape their straight un flavored NIC , AND LIKE IT
so adding ANY flavor works out great...

good prices too...

I'm trying to understand this. Are you saying their nic is good quality and you can vape it straight out of the bottle or are you saying they sell it in low enough concentrations that you can vape it straight up?

ETA: Or both?

ETAM: Seems they have an ultra premium nic as well. Ever tried it?

Sent from Uranus using Tapatalk

 

[TrollDragon]

$8.50 for shipping is expensive you say.
Y'all need to live other places for a while...

 

[Two_Bears]

I'm trying to understand this. Are you saying their nic is good quality and you can vape it straight out of the bottle or are you saying they sell it in low enough concentrations that you can vape it straight up?

ETA: Or both?

Sent from Uranus using Tapatalk

Its. A very low concentration 18 ml,mg

 

[Plettschner]

I LOVE this little Kayfun. Search back about 20-30 pages where i pointed out tge parts needed for the short Kayfun to Dancing Heretic and oplhilik.

If you can't find it PM me and I will get a parts list.

If you want direct lung instead of direct lung get tge $4.11 Kayfun Monster Mini V3.

I LOVE the short Kayfun.

Pull deck and tweak build without spilling Juice

Fill without squirting juice through fill port.

Less weight

Pocket Friendly.

I think tge flavor is better than a full sized Kayfun.

If it's the same info from the blog post you mentioned, I got those links. Thanks for posting it.


Sent from Uranus using Tapatalk

 

[brewbear]

Where do you usually like to buy?

I get all my DIY stuff from Nicotine River.

 

[petrotech]

Got some new unicorn bottles today. (Not sure what unicorn means...but that's what they called it at the vape shop. Lol)

These things make my life so much easier. Big holes to pour in to.

 

[Two_Bears]

I'm just digging through this finally. Honestly, I have shied away from the Kayfuns due to how many different models and versions there are... a bit overwhelming. I've decided, I'm going to build your rig and give it a shot. It sounds like it works very well. I started poking at the links and around FT... holy rat butts, Batman, there are a TON of parts for these things! How can you know what parts fit with what other parts?

Anyway, I'm going to get the base you recommended, but, of course, in black. I'll probably get the same translucent tanks. Looks like I have to get the barrel/chimney set as the other barrel onlys are out of stock. Have you seen any black barrels anywhere?

That blog was a parts list of things you wont need.

I sent you a PM of just the parts for the short Kayfun.

 

[Two_Bears]

If Someone wants to assemble the short Kayfun i like so much.

Here is a much abbreviated list of parts.

Short Kayfun parts

$0.91 Free Shipping Replacement Screws for Kayfun V4 (5-Pack) (Screws, 5-Pack) at m.FastTech.com
Spare screws for trapping leads.

https://m.fasttech.com/products/3023/10006430/2066601-rubber-o-ring-seals-for-e-cigarette-20-pack
Spare O rings for Kayfun and Orchid bases

https://m.fasttech.com/products/302...lacement-acrylic-bell-cap-for-kayfun-mini-rta
Short bell cap

https://m.fasttech.com/products/3023/10009156/2056700-spare-parts-kit-for-kayfun-lite-plus-v2
Spare parts for Kayfun lite plus V2
The base i use

https://m.fasttech.com/products/302...lacement-five-pawns-styled-chimney-for-kayfun
Barrel and Nano chimney for Kayfun. You will only use the barrel

https://m.fasttech.com/products/3023/10009156/2019500-replacement-base-for-22mm-kayfun-lite-plus-v2
The Kayfun base i use for MTL.

https://m.fasttech.com/products/3023/10009156/4061201-replacement-base-for-kayfun-monster-v3-rta
Kayfun Monster Mini V3 base if you want a direct lung vape. I have both kinds of bases.

https://m.fasttech.com/products/302...lacement-acrylic-bell-cap-for-kayfun-mini-rta
LOT of 5 flat top bell caps

 

[DancingHeretik]

after many trys with several vendors, my go to place now is:
- Wholesale Nicotine, Bulk e-Liquid, PG, VG and Supplies Heartlandvapes Wholesale

I've got nic from RTS, MFS, Heartland, Ecigexpress, and Wizard's Lab. Don't want all my eggs in one basket.

Got some new unicorn bottles today. (Not sure what unicorn means...but that's what they called it at the vape shop. Lol)

These things make my life so much easier. Big holes to pour in to.

Cool looking bottles!

 

[DancingHeretik]

If Someone wants to assemble the short Kayfun i like so much.

Here is a much abbreviated list of parts.

Short Kayfun parts

$0.91 Free Shipping Replacement Screws for Kayfun V4 (5-Pack) (Screws, 5-Pack) at m.FastTech.com
Spare screws for trapping leads.

$0.80 Free Shipping Rubber O-Ring Seals for E-Cigarette (20-Pack) (17*1mm: 20-Pack, Black) at m.FastTech.com
Spare O rings for Kayfun and Orchid bases

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Translucent) at m.FastTech.com
Short bell cap

https://m.fasttech.com/products/3023/10009156/2056700-spare-parts-kit-for-kayfun-lite-plus-v2
Spare parts for Kayfun lite plus V2
The base i use

https://m.fasttech.com/products/302...lacement-five-pawns-styled-chimney-for-kayfun
Barrel and Nano chimney for Kayfun. You will only use the barrel

https://m.fasttech.com/products/3023/10009156/2019500-replacement-base-for-22mm-kayfun-lite-plus-v2
The Kayfun base i use for MTL.

https://m.fasttech.com/products/3023/10009156/4061201-replacement-base-for-kayfun-monster-v3-rta
Kayfun Monster Mini V3 base if you want a direct lung vape. I have both kinds of bases.

https://m.fasttech.com/products/302...lacement-acrylic-bell-cap-for-kayfun-mini-rta
LOT of 5 flat top bell caps

Quoting so when I get back home I can double check I got the right stuff.