Youde Goblin
- Thread starter dravell
- Start date
- th_trl_thread_readers 0
- Status
Youde Goblin V1.1 Shows in Stock at a place in Portugal. I know nothing about the vendor.... vaporizarte.com
That's where I bought mine from. Took about 5 days from ordering, to my home in the UK. May take a little longer to the US. Seem like a decent company, kept me well informed throughout the process
May take a little longer to the US. Seem like a decent company, kept me well informed throughout the process
Seems like it. as least they've told me that it shipped ... ordered late last night.
Got my v1.2 today. Threw the 4.5ml glass and chimney on my v1 since I already had a build on it, and while I haven't vaped the two side by side, I would say the flavor isn't diminished.
I really like the extra tank capacity. I'll throw a build in the v1.2 and let everyone know how it goes. I'm not hurt having two of these, that's for sure.
I've been Vaping a mutation X while waiting, and while this can't compare to the airflow, the flavor is far and away better on the goblin.
I really like the extra tank capacity. I'll throw a build in the v1.2 and let everyone know how it goes. I'm not hurt having two of these, that's for sure.
I've been Vaping a mutation X while waiting, and while this can't compare to the airflow, the flavor is far and away better on the goblin.
I'm amazed by the prices people are paying in Europe. The prices are double in some cases. Not to sound ungrateful, thank you all none the less, but I figure I'll wait till CNY is over. FIF is selling them for $30 including international shipping.
What's the difference between v1.0, v1.1 and v1.2?
I thought v1.0 came with the small tank and chimney only and v1.1 came with both small and large tanks and chimneys. So what's v1.2?
I thought v1.0 came with the small tank and chimney only and v1.1 came with both small and large tanks and chimneys. So what's v1.2?
Threw in a dual coil .4 ohm build. Wicked the same as my last one, vapes great.
A few things. The new screws trap 26 gauge much better. It seems they went with a tapered head, rather than a shouldered head this time, which works well. Also, the fill screw head might be slightly bigger, as it fits much tighter in the tank.
And, I taste no difference between the taller chimney and the shorter chimney. Flavor is dense and great.
2.5mm coils are still pretty tight in the chimney, but still fit, which since I don't think they changed those, makes sense.
And though I haven't looked side by side, the juice channels look slightly deeper, but again, not verified at this time.
Cheesestain, it looks like the v1.1 and v1.2 are the same, they just screwed up the names. And, see the above for the differences between the v1 and v1.1/2 in addition to the tanks and chimneys.
A few things. The new screws trap 26 gauge much better. It seems they went with a tapered head, rather than a shouldered head this time, which works well. Also, the fill screw head might be slightly bigger, as it fits much tighter in the tank.
And, I taste no difference between the taller chimney and the shorter chimney. Flavor is dense and great.
2.5mm coils are still pretty tight in the chimney, but still fit, which since I don't think they changed those, makes sense.
And though I haven't looked side by side, the juice channels look slightly deeper, but again, not verified at this time.
Cheesestain, it looks like the v1.1 and v1.2 are the same, they just screwed up the names. And, see the above for the differences between the v1 and v1.1/2 in addition to the tanks and chimneys.
Got the v1.2 as was stated on the website.
Don't know about v1 and if this one has different sized juice channels.
I have read many people fiddling around with the wicking on the first version.
I just cut my wick ends square with the edge of the build deck, pushed them in the direction of the juice channels and screwed on the chamber. No dry hits in two tanks so far.
Don't know about v1 and if this one has different sized juice channels.
I have read many people fiddling around with the wicking on the first version.
I just cut my wick ends square with the edge of the build deck, pushed them in the direction of the juice channels and screwed on the chamber. No dry hits in two tanks so far.
If anyone is looking for a Goblin, Triangle has them in stock for $27. It's the new version (Triangle is calling it "V2") with both the 3.0 and 4.2ml glass and the long and short chimneys. Goblin V2 - Triangle Vape LLC
^Thats where I ordered from as well, came out to $30 with shipping. Super excited to get my hands on it!
FFfuuuuu.... I literally checked there the other day and they were out, just spent $40 on a used one locally >.< Honestly I'm not impressed, not a tank person but I heard this was the drippers tank so yeah... Airflow wasn't nearly as good as I thought it would be, with the AFC closed ~ half way it has the same draw as wide open. The deck is a pain to build on, and the screws are too short (They barely pinch 26g, even still it wiggles a lot and I've had both 26g builds short out on me because of that within the first tank of normal vaping. The deck is too small to fit a .5Ω dual coil with 24g, so I'm unable to use this on my God 180 unless I want to risk a short and dry hit from hell). Probably going to be throwing mine on e-bay soon
Damn, that sucks. The used one you got, was it the original version? I have heard the original ones had problems with the post screws on smaller wire but the issue was resolved with the latest version, as well the latest one coming with both the 3ml and a 4.2ml included. Maybe sell the first one and give the updated one a shot?
I got some grub screws on the way, I'll switch them out but idk about buying another if I sell this one Only got it because I thought it would have killer airflow, but the airflow isn't nearly what the outside suggests
Only got it because I thought it would have killer airflow, but the airflow isn't nearly what the outside suggests 
I got some grub screws on the way, I'll switch them out but idk about buying another if I sell this one
From what you're describing, your coils are too big and are blocking the airflow. Try using 28 gauge kanthal and wrap a 2mm coil. About 6 or 7 wraps. The smaller coil will allow more air to flow around it.
This thing should have plenty of air if you don't fill the evaporation chamber.
FFfuuuuu.... I literally checked there the other day and they were out, just spent $40 on a used one locally >.< Honestly I'm not impressed, not a tank person but I heard this was the drippers tank so yeah... Airflow wasn't nearly as good as I thought it would be, with the AFC closed ~ half way it has the same draw as wide open. The deck is a pain to build on, and the screws are too short (They barely pinch 26g, even still it wiggles a lot and I've had both 26g builds short out on me because of that within the first tank of normal vaping. The deck is too small to fit a .5Ω dual coil with 24g, so I'm unable to use this on my God 180 unless I want to risk a short and dry hit from hell). Probably going to be throwing mine on e-bay soon
This is a 26g 2.5mm 0.4Ω build.
I got some grub screws on the way, I'll switch them out but idk about buying another if I sell this one
Don't forget the grub screws will most likely use a .9mm alien wrench, very small.
I've got the same 26 GA .4 ohm 2.5 mm build add the above on mine. It does block airflow A bit.
A 2mm build would be better, but I haven't tried one with Trevors wicking method yet. I was wicking it different and got dry hits, so I went larger trying to correct that, which didn't work. I think I'll get some 28 GA and do a 2mm build to see what happens.
A 2mm build would be better, but I haven't tried one with Trevors wicking method yet. I was wicking it different and got dry hits, so I went larger trying to correct that, which didn't work. I think I'll get some 28 GA and do a 2mm build to see what happens.
I did Trevor's build/wick, it spits at 25 watts at 30 it's better, what wattage is good to start at then go from there? I know nothing about fuel to airflow ratios....how much can I push this tank without burning it?
Waaaay better than the Atlantis and the lancia so far but I'm not using max vg like an rda so ymmv. Close to kayfun flavor and IV been building them for 6 months so I have max flavor nailed, but with great vapor in the goblin too. I'm very pleased, did I forget to say that??
Waaaay better than the Atlantis and the lancia so far but I'm not using max vg like an rda so ymmv. Close to kayfun flavor and IV been building them for 6 months so I have max flavor nailed, but with great vapor in the goblin too. I'm very pleased, did I forget to say that??
Last edited:
- Status
