Threads
-
Locked
LOST VAPE THELEMA POD MOD review by hittman
- By hittman
- Device Reviews
- 8 Replies
I’m glad to be back again today with a very nice pod mod called the Lost Vape Thelema pod mod kit. It was sent to me by Sourcemore in order to do a fair and honest review. I have just within the last month or two become more familiar with Lost Vape hardware having purchased a couple of the Grus mods and an Ursa Quest kit. My initial impression after trying those two is that they make some well- built equipment. Enough about those two. Let’s go down and take a look at the Thelema Pod mod and I’ll give you my input on it.
What’s in the box?
1* Thelema Kit
1* Thelema Pod (4ml pre-installed)
1* 0.2ohm Ultra Boost M4 Mesh Coil (Pre-installed)
1* 0.3ohm Ultra Boost M1 Clapton Mesh Coil
1* Type-C Cable
1* Warranty Card
1* User Manual
1* Extra drip tip
4* o rings
FEATURES:
1. Proprietary Quest chip
2. 3000mAh built-in battery
3. Compatible with Ultra Boost Series Coils, including RBA
4. Convenient top filling
5. 0.96 inch TFT color screen
6. Dual-channel airflow
7. Adjustable airflow ring on coil
8. Maximum 80W output
9. Type-c 2A fast charging
10. Two options of drip tip available: 510 DL drip tip and 510 MTL drip tip
11. 4ml visual pod
SPECIFICATIONS:
INITIAL THOUGHTS:
The packaging on the Thelema is nice and simple. The outer cover slides off exposing a lift off box top. However, unlike almost every kit I open with this kind of packaging, Lost Vape had the forethought to have cut outs on each side of the box lid so you can easily grip it by the sides and remove the box top. Most kits you have to shake or wiggle the box top to get it off. It’s a nice touch that they thought of it. After removing the top, underneath I found the black with Ukranian leather Thelema pod mod with the pod on it and the .2 coil pre-installed. Also on nice thing was there were two drip tips included with the kit an MTL and a DTL tip. Of course, also included in the kit was the USB-C charging cable, user manual, and some extra o rings for the drip tips.
In my opinion the Thelema is a very classy looking mod. I’m pretty sure that it is real leather that is used on this mod. Some mods have a leather look but don’t feel or look like real leather. This one does. It doesn’t seem as padded as some do underneath. I’m not usually a big fan of red on mods but love the red leather on this one and the designs and textures stamped into it are truly beautiful.
On the front of the mod going from top to bottom is first what is supposed to be a viewing window for the liquid level but honestly I can’t see the level through it. Looking through the opening to the tinted pod, it’s just too dark for me to see the level. Below that is the fire button which just sticks out a little bit from being flush. Next is the .96” TFT color screen followed by the + and – buttons and finally the USB-C charging port on the bottom which is rated for 2 amps for charging the mod since it has an internal battery which is rated at 3000mah and a maximum of 80 watts. Facing the screen, to the right is the Lost Vape name and on the left is the word Thelema both etched into the metal frame. On the back and wrapping around the sides some is the beautiful leather wrap that I mentioned earlier. Also there is a fairly large opening on either side of the mod to allow for airflow and you can even see the coil ring through it.
The display on the Thelema reminds me of the screen on the Grus. It has a proprietary Quest chip but I’m not sure if it’s the same one as the Grus. On the screen at the top is a battery level indicator with the coil resistance to the right of it in very small font. A little too small for me. Below that is the word Power followed by the wattage set and a W below that. Next is the puff time and puff counter. On the bottom of the screen is a series of colored dots indicating the colors available for the display. They are light blue, yellow, white, red, green, and purple.
Operation of the Thelema is as follows:
For the most part, I liked the pod used on the Thelema. It has a 4ml capacity which I think is a good size for a device like this. It has replaceable drip tips and came with two. One for MTL and one for DTL. The coils included with the kit are the Ultra boost series of coils. Included was the M4 coil already installed which is .2 ohms and rated 40-60 watts and the other tip included was the M1 coil which is .3 ohms and rated for 30-40 watts. I found myself running both coils lower than the recommended wattages. I was running the M4 at 36 watts and the M1 at 22 watts. I felt like both coils performed well and gave pretty good flavor and plenty of vapor production. One other nice thing about this device is there is an RBA deck available for purchase separately so you aren’t locked into buying coils if you don’t want to.
One thing I absolutely loved about the pod was that it is top fill. Way to go Lost Vape! You don’t have to remove the pod to fill. So many I’ve seen lately are all bottom fill. The rubber plug for the fill port has the word OPEN on it and has an arrow pointing to the direction to pull the plug from. That’s another that a boy for Lost Vape.
On the bottom of the pod are four strong magnets which match up with the inside of the mod along with two gold plated contacts for electrical contact. Once you get the pod close to being inserted, the magnets will pull it in by themselves. The pod is somewhat tinted but I can still see the liquid level when the pod is removed but just cannot see it through the viewing window.
The coils are actually a push in but there is a collar that screws onto the coil before pushing it in and it has the airflow slots built into it for adjusting the airflow.
FINAL THOUGHTS:
I very much liked testing the Lost Vape Thelema Pod mod kit. To me it just screams quality and is has a very attractive appearance. From the real leather wrap to the metal frame it seems to be a quality made device. Some might say it has too much branding on it but I don’t mind the etching on either side. I’ve used it for almost two weeks and have had no issues with it and nothing more than a little condensation under the pod.
The mod is not heavy and not light. It’s a good weight for a pod mod. The screen is bright and being able to change the colors of the display is a fun feature. After reviewing a couple of mods that don’t do it, It’s nice to test one that does allow you to fire with the adjustment buttons locked.
It has a 3000mah battery with a 4ml liquid capacity. To me that is a pretty good match up with what the coils are rated for that are included in the kit.
I simply love that the pod is a top fill. I do however wish that I could see the liquid level through the viewing window in the pod while it is installed but it’s too dark. I think there would have had to be an opening in the back as well as the front to allow enough light in to see the liquid level. That is really the only con I found with this device.
And here we are at the end again. Would I recommend it? If it’s a well-made and attractive looking pod mod that you’re after with an available RBA deck and enough features to make most users happy then yes I would recommend it. It has been trouble free for me during my testing period. I did not receive the RBA with it for testing so cannot comment on how well it works but would like to try it some day.
Thanks goes out to Lilia and Sourcemore for sending the Lost Vape Thelema Pod Mod kit for review. Also thanks to you the readers that make it all happen. Below is a coupon code for the Thelema and a link to the Sourcemore website.
Discount Code: ELEMA for $24.69
https://www.sourcemore.com/lost-vape-thelema-pod-mod-kit.html
What’s in the box?
1* Thelema Kit
1* Thelema Pod (4ml pre-installed)
1* 0.2ohm Ultra Boost M4 Mesh Coil (Pre-installed)
1* 0.3ohm Ultra Boost M1 Clapton Mesh Coil
1* Type-C Cable
1* Warranty Card
1* User Manual
1* Extra drip tip
4* o rings
FEATURES:
1. Proprietary Quest chip
2. 3000mAh built-in battery
3. Compatible with Ultra Boost Series Coils, including RBA
4. Convenient top filling
5. 0.96 inch TFT color screen
6. Dual-channel airflow
7. Adjustable airflow ring on coil
8. Maximum 80W output
9. Type-c 2A fast charging
10. Two options of drip tip available: 510 DL drip tip and 510 MTL drip tip
11. 4ml visual pod
SPECIFICATIONS:
INITIAL THOUGHTS:
The packaging on the Thelema is nice and simple. The outer cover slides off exposing a lift off box top. However, unlike almost every kit I open with this kind of packaging, Lost Vape had the forethought to have cut outs on each side of the box lid so you can easily grip it by the sides and remove the box top. Most kits you have to shake or wiggle the box top to get it off. It’s a nice touch that they thought of it. After removing the top, underneath I found the black with Ukranian leather Thelema pod mod with the pod on it and the .2 coil pre-installed. Also on nice thing was there were two drip tips included with the kit an MTL and a DTL tip. Of course, also included in the kit was the USB-C charging cable, user manual, and some extra o rings for the drip tips.
In my opinion the Thelema is a very classy looking mod. I’m pretty sure that it is real leather that is used on this mod. Some mods have a leather look but don’t feel or look like real leather. This one does. It doesn’t seem as padded as some do underneath. I’m not usually a big fan of red on mods but love the red leather on this one and the designs and textures stamped into it are truly beautiful.
On the front of the mod going from top to bottom is first what is supposed to be a viewing window for the liquid level but honestly I can’t see the level through it. Looking through the opening to the tinted pod, it’s just too dark for me to see the level. Below that is the fire button which just sticks out a little bit from being flush. Next is the .96” TFT color screen followed by the + and – buttons and finally the USB-C charging port on the bottom which is rated for 2 amps for charging the mod since it has an internal battery which is rated at 3000mah and a maximum of 80 watts. Facing the screen, to the right is the Lost Vape name and on the left is the word Thelema both etched into the metal frame. On the back and wrapping around the sides some is the beautiful leather wrap that I mentioned earlier. Also there is a fairly large opening on either side of the mod to allow for airflow and you can even see the coil ring through it.
The display on the Thelema reminds me of the screen on the Grus. It has a proprietary Quest chip but I’m not sure if it’s the same one as the Grus. On the screen at the top is a battery level indicator with the coil resistance to the right of it in very small font. A little too small for me. Below that is the word Power followed by the wattage set and a W below that. Next is the puff time and puff counter. On the bottom of the screen is a series of colored dots indicating the colors available for the display. They are light blue, yellow, white, red, green, and purple.
Operation of the Thelema is as follows:
- Five presses of the fire button to turn the device on and off
- Press the + and – buttons to lock the adjustment buttons but the mod will still fire
- Press the fire button and the – button to reset the puff counter
- Press the fire button and the + button to change the screen display color
For the most part, I liked the pod used on the Thelema. It has a 4ml capacity which I think is a good size for a device like this. It has replaceable drip tips and came with two. One for MTL and one for DTL. The coils included with the kit are the Ultra boost series of coils. Included was the M4 coil already installed which is .2 ohms and rated 40-60 watts and the other tip included was the M1 coil which is .3 ohms and rated for 30-40 watts. I found myself running both coils lower than the recommended wattages. I was running the M4 at 36 watts and the M1 at 22 watts. I felt like both coils performed well and gave pretty good flavor and plenty of vapor production. One other nice thing about this device is there is an RBA deck available for purchase separately so you aren’t locked into buying coils if you don’t want to.
One thing I absolutely loved about the pod was that it is top fill. Way to go Lost Vape! You don’t have to remove the pod to fill. So many I’ve seen lately are all bottom fill. The rubber plug for the fill port has the word OPEN on it and has an arrow pointing to the direction to pull the plug from. That’s another that a boy for Lost Vape.
On the bottom of the pod are four strong magnets which match up with the inside of the mod along with two gold plated contacts for electrical contact. Once you get the pod close to being inserted, the magnets will pull it in by themselves. The pod is somewhat tinted but I can still see the liquid level when the pod is removed but just cannot see it through the viewing window.
The coils are actually a push in but there is a collar that screws onto the coil before pushing it in and it has the airflow slots built into it for adjusting the airflow.
FINAL THOUGHTS:
I very much liked testing the Lost Vape Thelema Pod mod kit. To me it just screams quality and is has a very attractive appearance. From the real leather wrap to the metal frame it seems to be a quality made device. Some might say it has too much branding on it but I don’t mind the etching on either side. I’ve used it for almost two weeks and have had no issues with it and nothing more than a little condensation under the pod.
The mod is not heavy and not light. It’s a good weight for a pod mod. The screen is bright and being able to change the colors of the display is a fun feature. After reviewing a couple of mods that don’t do it, It’s nice to test one that does allow you to fire with the adjustment buttons locked.
It has a 3000mah battery with a 4ml liquid capacity. To me that is a pretty good match up with what the coils are rated for that are included in the kit.
I simply love that the pod is a top fill. I do however wish that I could see the liquid level through the viewing window in the pod while it is installed but it’s too dark. I think there would have had to be an opening in the back as well as the front to allow enough light in to see the liquid level. That is really the only con I found with this device.
And here we are at the end again. Would I recommend it? If it’s a well-made and attractive looking pod mod that you’re after with an available RBA deck and enough features to make most users happy then yes I would recommend it. It has been trouble free for me during my testing period. I did not receive the RBA with it for testing so cannot comment on how well it works but would like to try it some day.
Thanks goes out to Lilia and Sourcemore for sending the Lost Vape Thelema Pod Mod kit for review. Also thanks to you the readers that make it all happen. Below is a coupon code for the Thelema and a link to the Sourcemore website.
Discount Code: ELEMA for $24.69
https://www.sourcemore.com/lost-vape-thelema-pod-mod-kit.html
-
Locked
Android > Google Text to Speech or Google voice > How to Repair!
- By at1rest
- The Lounge
- 0 Replies
-
Locked
Closed/Sold MTL Vape Lot - Brunhilde, Doggystyle 2K16, and More
- By CAAB
- Member Classifieds and Swaps
- 29 Replies
I have some great MTL vape gear up for sale. It’s stuff I overstocked on for the Vapocalypse and am looking to downsize a bit. A lot of the items are brand new, unopened, purchased late last year. Shipping is $5 flat rate in the US, no matter how many items you buy in the lot.
Atomizers
Vapefly Brunhilde MTL RTA - Stainless Steel. 1X for sale, Brand New, Unopened. $30
Vapefly Brunhilde MTL RTA - Black. 2X for sale. Brand New, Unopened. $30 each.
Regarding the Brunhilde MTL RTA. It’s a solid performing RTA. I love that you can just lift the bell cap to access the build deck. No need to remove a the tank or anything. It’s particularly useful if you are vaping a coil killer. I am still keeping some in my personal stash, I am just looking to downsize. Brunhilde MTL RTA
SXK Doggystyle 2K16 - Brand New, Unopened. 5X for sale. With spare PC tank. $11 each.
Regarding the SXK Doggystyle 2K16. It’s not available on Fasttech anymore as far as I can tell. That’s a shame, because it’s a real solid and simple MTL RTA. I still am keeping some on hand myself, but judging by their performance, I don’t need to stock as many. I bought extra PC tanks as well, and for each Doggystyle purchase, I am throwing an extra PC tank in.
Vandy Vape Berserker MTL RDA V1.5. Sold as lot of 3. $20 total.
I am getting rid of my V1.5 collection because I don’t have a need to drip or squonk anymore. As much as I love them, they most likely will never be used again. Here's a review of the V1.5L Login to view embedded media
Mods
Authentic Tube Dual MOSFET Mechanical Tube. New. Unused. With 2 Extra MOSFET Chips $35.
This item was opened only to inspect. I have another one that I use, it’s a nice mod. Very simple. It behaves like a mechanical mod but with the protection of a MOSFET chip. It accepts an 18650 or 18350 battery. I am including two extra replacement MOSFET chips.
Mod link: $28.44 Authentic Tube Dual MOSFET Mechanical Tube - 1*18650/18350 at FastTech - Free Shipping
MOSFET chip link: $4.69 Authentic Tube Dual MOSFET Box Chip - V2 at FastTech - Free Shipping
Unico, Univapo. Used, ~40 puffs. Excellent Condition. Needs Replacement Coils. $5 shipping only.
I won this item on ECF. It was my first pod experience. I enjoyed it, but I vape NET, which kills coils. If I didn’t use rebuildables, I’d be sinking a ton of money on stock coils. Anyway, I got it for free, so I am asking only for shipping charges on this one. Keep in mind you'll need to buy coils before you use this.
Unico New Pod Kits
Atomizers
Vapefly Brunhilde MTL RTA - Stainless Steel. 1X for sale, Brand New, Unopened. $30
Vapefly Brunhilde MTL RTA - Black. 2X for sale. Brand New, Unopened. $30 each.
Regarding the Brunhilde MTL RTA. It’s a solid performing RTA. I love that you can just lift the bell cap to access the build deck. No need to remove a the tank or anything. It’s particularly useful if you are vaping a coil killer. I am still keeping some in my personal stash, I am just looking to downsize. Brunhilde MTL RTA
SXK Doggystyle 2K16 - Brand New, Unopened. 5X for sale. With spare PC tank. $11 each.
Regarding the SXK Doggystyle 2K16. It’s not available on Fasttech anymore as far as I can tell. That’s a shame, because it’s a real solid and simple MTL RTA. I still am keeping some on hand myself, but judging by their performance, I don’t need to stock as many. I bought extra PC tanks as well, and for each Doggystyle purchase, I am throwing an extra PC tank in.
Vandy Vape Berserker MTL RDA V1.5. Sold as lot of 3. $20 total.
- 1 Gold, Brand New, Unopened.
- 1 Gold, Used. Very Good Condition. 24 mm beauty ring showing wear. 22mm beauty ring in perfect shape.
- 1 Black, Used. Very Good Condition. Build deck showing a little chipping on the black paint.
- Includes spare inserts and o-rings I procured from Vandy Vape
I am getting rid of my V1.5 collection because I don’t have a need to drip or squonk anymore. As much as I love them, they most likely will never be used again. Here's a review of the V1.5L Login to view embedded media
Mods
Authentic Tube Dual MOSFET Mechanical Tube. New. Unused. With 2 Extra MOSFET Chips $35.
This item was opened only to inspect. I have another one that I use, it’s a nice mod. Very simple. It behaves like a mechanical mod but with the protection of a MOSFET chip. It accepts an 18650 or 18350 battery. I am including two extra replacement MOSFET chips.
Mod link: $28.44 Authentic Tube Dual MOSFET Mechanical Tube - 1*18650/18350 at FastTech - Free Shipping
MOSFET chip link: $4.69 Authentic Tube Dual MOSFET Box Chip - V2 at FastTech - Free Shipping
Unico, Univapo. Used, ~40 puffs. Excellent Condition. Needs Replacement Coils. $5 shipping only.
I won this item on ECF. It was my first pod experience. I enjoyed it, but I vape NET, which kills coils. If I didn’t use rebuildables, I’d be sinking a ton of money on stock coils. Anyway, I got it for free, so I am asking only for shipping charges on this one. Keep in mind you'll need to buy coils before you use this.
Unico New Pod Kits
-
Locked
New member and steam crave fan
- By ChrisGooner
- New Members: Introduce Yourself!
- 11 Replies
-
Locked
Geekvape Wenax K1 Pod system review by hittman
- By hittman
- Device Reviews
- 12 Replies
Yes, it’s me again. I’m here to present to you a new smallish pod system being released by Geekvape called the Wenax K1. If you follow Geekvape products then you might be aware that this is the third pod device in the Wenax line. First was the Wenax Stylus, then more recently was the Wenax C1, and now being released soon is the Wenax K1. It is a familiar shape and operation to me since I’ve tested so many pod devices. This one was sent to me by April from Geekvape in order to do a fair and honest review. This is a pretty simple device so I’ll try to keep it short and cover everything I can think of. Below is a link to my review on the Wenax Stylus. I was not sent the C1 for review but do own one and would just say that it has decent flavor but the draw was a little too loose for me for MTL.
https://www.e-cigarette-forum.com/threads/geekvape-wenax-stylus-review-by-hittman.947425/
What’s in the box?
1pc Device
2pc Cartridge (pre-installed: 0.8ohm, 12-16W
Spare Cartridge: 1.2ohm, 10-12W)
1pc USB Cable (Type-c)
User Manual
SPECIFICATIONS:
Power Output: 9-16W
Coil Resistance: 0.4-3ohm
Battery Capacity: 600mAh
Charging Specification: USB-C Charging Port 5V
Low Voltage Warning: 3.2 +- 0.1V
PCBA Temperature Alarm: 80C
Longest Vaping Time: 10S
Working Temperature: -10 - 45C
Stand-by Current: <=15uA
Initial Thoughts:
I thought the packaging on the K1 was simple but elegant. I like the white box with the slip off cover and just the Geekvape name and logo on the bottom right corner. Underneath that is a white pull off box lid which exposed the Wenax K1 in blue (my favorite color) with the .8 ohm pod pre-installed, a second pod at 1.2 ohms, a user manual in a sleeve and a USB-C charging cable inside a small white box.
I very much like the shade of the blue K1 that I received. The body of the K1 is made of anodized aluminum and is very lightweight. I was a bit surprised that the battery capacity is only 600mah and would have hoped for a little more seeing as it’s almost exactly as tall as the Xros pod. However it is a little thinner than the Xros. It’s rated for an output of 12-16 watts depending on whether you use the 1.2 or .8 ohm pod and which power level that you choose. There are two small holes on each side of the body that allow for the airflow. The fire button is almost recessed but not quite and is very clicky when pressed but does not rattle. The USB-C charging port is on the bottom of the K1 so it can’t be stood up while charging. I think that even if it was on the side that it wouldn’t stand up since it is so light that the cord would knock it over.
The operation of the K1 is very simple.
The pod for the K1 has a 2ml capacity and clicks into the body of the unit very tightly and has never come loose accidentally. As a matter of fact, it takes a little effort holding the battery and the pod in separate hands in order to remove it.
The pod is filled through a port on the side of the pod with a rubber plug. I personally like the side fill on pods because it allows me to get the most liquid in the pod by tilting it while filling. These pods are a sealed unit and do not have replaceable coils which may be a con for some people. I personally don’t mind this because usually these types of pods are fairly inexpensive.
The airflow draw is tighter than it was on the C1 Wenax but still a little loose and not a cigarette type of tight. There is not an airflow adjustment so you get what you get. Personally I like a slightly loose MTL draw so it was a good fit for me even with the flat fixed mouthpiece.
There are two gold looking contacts on the bottoms of the pods to make the electrical connections and like I mentioned, the pod really clicks into place without any magnets present. The pod has a very slight tint to it which makes it very easy to see the liquid level in the pod. I very much like and appreciate this feature. Even with a clear liquid I am using in the 1.2 pod, the level is easily visible.
FINAL THOUGHTS:
Over all, the Wenax K1 is a pretty decent pod device. This one and a few others surprise me as to how strong and how much vapor can be produced from such a small pod device. I found it comfortable to hold and for once prefer the auto draw over pressing the button to fire. I do feel like the airflow could have been a little bit tighter but for what it was, I enjoyed it. It’s not super tight or super loose. Just somewhere in the middle of those two.
I think the 2ml capacity is plenty enough for a 600mah battery unit. I was able to get about 1.5 pods worth of liquid vaped before the battery indicator turned from green (highest level) to blue (medium level), and seemed to last quite a while before going to red (lowest level) and having to be recharged.
I personally didn’t notice a huge difference between the .8 and 1.2 ohm pods. Both had what I would call decent flavor for a pod device but not great. I ran the .8 pod on the lowest (white) setting and ran the 1.2 pod on the blue (medium) setting. Taking into consideration that it is a small pod device, I would probably give it a 7 out of 10 on flavor and an 8 out of 10 on vapor production. I forgot to mention but I was using 70vg/30pg DIY liquid in both pods and had no issues with dry hits.
In the end, I’m sure what you would like to know is if I would recommend the Wenax K1 to you. If you’re looking for a simple and well-functioning pod device for short trips out and about then yes I think I would. I’ve used better and I’ve used a lot worse pod devices. From what I’ve seen so far it’s going to be fairly inexpensive to purchase and would hope that the replacement pods are not very expensive.
In closing, I’d like to thank April and Geekvape for sending the Wenax K1 pod kit for this review. As usual it has been a pleasure dealing with Geekvape. A great BIG thanks to you the readers that take the time to read my reviews. THANK YOU!
https://geekvape.com/wenax/Wenax-K1.html
https://www.e-cigarette-forum.com/threads/geekvape-wenax-stylus-review-by-hittman.947425/
What’s in the box?
1pc Device
2pc Cartridge (pre-installed: 0.8ohm, 12-16W
Spare Cartridge: 1.2ohm, 10-12W)
1pc USB Cable (Type-c)
User Manual
SPECIFICATIONS:
Power Output: 9-16W
Coil Resistance: 0.4-3ohm
Battery Capacity: 600mAh
Charging Specification: USB-C Charging Port 5V
Low Voltage Warning: 3.2 +- 0.1V
PCBA Temperature Alarm: 80C
Longest Vaping Time: 10S
Working Temperature: -10 - 45C
Stand-by Current: <=15uA
Initial Thoughts:
I thought the packaging on the K1 was simple but elegant. I like the white box with the slip off cover and just the Geekvape name and logo on the bottom right corner. Underneath that is a white pull off box lid which exposed the Wenax K1 in blue (my favorite color) with the .8 ohm pod pre-installed, a second pod at 1.2 ohms, a user manual in a sleeve and a USB-C charging cable inside a small white box.
I very much like the shade of the blue K1 that I received. The body of the K1 is made of anodized aluminum and is very lightweight. I was a bit surprised that the battery capacity is only 600mah and would have hoped for a little more seeing as it’s almost exactly as tall as the Xros pod. However it is a little thinner than the Xros. It’s rated for an output of 12-16 watts depending on whether you use the 1.2 or .8 ohm pod and which power level that you choose. There are two small holes on each side of the body that allow for the airflow. The fire button is almost recessed but not quite and is very clicky when pressed but does not rattle. The USB-C charging port is on the bottom of the K1 so it can’t be stood up while charging. I think that even if it was on the side that it wouldn’t stand up since it is so light that the cord would knock it over.
The operation of the K1 is very simple.
- Five clicks of the fire button to turn the device on and off
- Button fire or Auto fire functions
- Three clicks of the fire button to change between the three power levels which are indicated by white, blue and green lights where white is the lowest power level
- A quick press of the fire button will show battery level
- There is also what they are calling an anti-inadvertently mode where the mode goes into sleep mode in ten seconds so it can’t be fired accidentally but I honestly haven’t noticed a benefit from it
The pod for the K1 has a 2ml capacity and clicks into the body of the unit very tightly and has never come loose accidentally. As a matter of fact, it takes a little effort holding the battery and the pod in separate hands in order to remove it.
The pod is filled through a port on the side of the pod with a rubber plug. I personally like the side fill on pods because it allows me to get the most liquid in the pod by tilting it while filling. These pods are a sealed unit and do not have replaceable coils which may be a con for some people. I personally don’t mind this because usually these types of pods are fairly inexpensive.
The airflow draw is tighter than it was on the C1 Wenax but still a little loose and not a cigarette type of tight. There is not an airflow adjustment so you get what you get. Personally I like a slightly loose MTL draw so it was a good fit for me even with the flat fixed mouthpiece.
There are two gold looking contacts on the bottoms of the pods to make the electrical connections and like I mentioned, the pod really clicks into place without any magnets present. The pod has a very slight tint to it which makes it very easy to see the liquid level in the pod. I very much like and appreciate this feature. Even with a clear liquid I am using in the 1.2 pod, the level is easily visible.
FINAL THOUGHTS:
Over all, the Wenax K1 is a pretty decent pod device. This one and a few others surprise me as to how strong and how much vapor can be produced from such a small pod device. I found it comfortable to hold and for once prefer the auto draw over pressing the button to fire. I do feel like the airflow could have been a little bit tighter but for what it was, I enjoyed it. It’s not super tight or super loose. Just somewhere in the middle of those two.
I think the 2ml capacity is plenty enough for a 600mah battery unit. I was able to get about 1.5 pods worth of liquid vaped before the battery indicator turned from green (highest level) to blue (medium level), and seemed to last quite a while before going to red (lowest level) and having to be recharged.
I personally didn’t notice a huge difference between the .8 and 1.2 ohm pods. Both had what I would call decent flavor for a pod device but not great. I ran the .8 pod on the lowest (white) setting and ran the 1.2 pod on the blue (medium) setting. Taking into consideration that it is a small pod device, I would probably give it a 7 out of 10 on flavor and an 8 out of 10 on vapor production. I forgot to mention but I was using 70vg/30pg DIY liquid in both pods and had no issues with dry hits.
In the end, I’m sure what you would like to know is if I would recommend the Wenax K1 to you. If you’re looking for a simple and well-functioning pod device for short trips out and about then yes I think I would. I’ve used better and I’ve used a lot worse pod devices. From what I’ve seen so far it’s going to be fairly inexpensive to purchase and would hope that the replacement pods are not very expensive.
In closing, I’d like to thank April and Geekvape for sending the Wenax K1 pod kit for this review. As usual it has been a pleasure dealing with Geekvape. A great BIG thanks to you the readers that take the time to read my reviews. THANK YOU!
https://geekvape.com/wenax/Wenax-K1.html
-
Locked
Closed/Sold Recurve Dual trade for Solo
- By AvaOrchid
- Member Classifieds and Swaps
- 1 Replies
Attachments
-
Locked
US shipping cutoff dates - USPS, Fedex & UPS
- By 440BB
- General Vaping Discussion
- 1245 Replies
-
Locked
Closed/Sold Asmodus Luna white mosaic
- By AvaOrchid
- Member Classifieds and Swaps
- 4 Replies
Attachments
-
Locked
OXVA Arbiter RTA Review
- By SP013
- Atomizer Reviews
- 0 Replies
Hi,
Today I have a top airflow RTA for review, the Oxva Arbiter. The first RTA designed and produced by OXVA.
Interesting uniqueness of this top airflow RTA is that it has 100% top to bottom airflow.
Specifications:
Packaging:
- 1 x Arbiter RTA (bubble glass)
- 1 x Straight glass tube
- 2 x Fused clapton coil
- 2 x Shoelace cotton
- 1 x Accessory bag
- 1 x User manual
Review:
It is a big RTA; at the very base it measures 26.5mm but the middle of the base measures 28mm. I received two color options, black and stainless steel. Both RTA’s look great, but for me the branding is a bit overexaggerated. There is simply a bit too much branding, especially on the outer chamber, a logo and in big letter ARBITER. It would have been nice if only the logo was put onto the outer chamber. And what about the red O-rings? A strange esthetic decision in my opinion. Good news is that a 2nd batch has been produced by OXVA with matching O-rings, so for the black RTA black O-rings and the SS RTA white O-rings.
Machining wise this RTA feels extremely well made, there is however a slight difference between the black and stainless steel, and then I am mainly referring to the top-cap. The Stainless Steel one has quite sharp corners compared to the black one. It is not extremely sharp to cut yourself, but I do feel a difference. Probably because of the layer of black paint the black one is less sharp. But overall, both feel solid.
A nice-half turn top-cap uncovers two large enough fill-holes that are slightly built inside the top, meaning that you can poor liquid even on the sides and it will flow into the tank. With the bubble glass you get 6ml capacity which is proper, with straight 4ml. A tool is included in the packaging, but I have no idea what it is meant for, it is also not written in the manual. First, I thought it is used to unscrew the top-base from the tank to be able to release the airflow ring. I tried but couldn’t get it to loosen.
In general, it is easy to take apart this RTA, but the airflow ring is (as far as I tried) stuck to the top of the RTA. Wish it was possible to take off the airflow ring for cleaning purposes.
When unscrewing the deck, which has really nice threading, you will straight away know what the top to bottom airflow is about. An airflow inner piece/shaft drops out. What this piece does, it blocks all air around the deck apart from the bottom sides. Since the deck is raised up quite a bit, the airflow automatically is pushed up towards the bottom of the coils.
Wide open this tank has really a lot of airflow, like really a lot. No matter which airflow setting you have it at, it sounds very smooth. For me the best airflow setting start from half closed to ¾ closed.
It is hard to find much easier decks than this one. Because it is raised so high it is easy to clip your coils from underneath the posts. Just drop in the coils, fasten the screws and clip the coil-legs. You can get away with dual 3.5mm ID coils on this deck, but I have been mainly using it with Dual 3.0mm ID coils.
Wicking slots don’t look very big, but I think it’s an illusion because the deck is quite large. No issues wicking this RTA at all, also no need to comb out the cotton extremely much. What I did learn overtime with this RTA is that the best is to not force the cotton all the way to the bottom of the deck, but to simply ‘lay’ the end of the cotton on top of the wicking ports. When I was first wicking I kind of forced the cotton down, but that causes a massive issue with chain-vaping. Since the deck is so high, the liquid needs more time to get up there, the longer the cotton, the least success with chain-vaping. After just laying the cotton on top of the wick-port I had no issues with chain vaping.
Best part for me is the vape of this RTA. Since it is a top-airflow RTA I need to judge that way as well, because from my general experience bottom-airflow is not yet beaten (and probably won’t be) by a top airflow RTA. But this one is extremely good for a top airflow RTA, the best out there in my opinion if I am talking about the vape. Very good flavor and a very smooth airflow, no matter in which setting. Flavor wise it even gets close to my favorite flavor banger, the Dovpo Blotto.
One disappointment on this RTA is that it’s a no-no for single coil builds. I tried several coils with different ways of wicking, but the flavor is simply very blunt. And that is because the deck first is maybe a bit too big for that, and second of all the airflow system is just not made for single coils. When placing the coil in the middle, the airflow simply does not touch the coil. When putting on the side there is too much airflow from the other side coming through, taking away the flavor.
Conlusion:
A very solidly made and extremely well performing top airflow RTA. Easy to build, large capacity, smooth airflow and very good flavor.
I have only two things to complain about; not very good performer as a single coil RTA and a bit too much branding.
Also nice to see that Oxva straight away listened to the reviewers and made the adjustment with the O-ring color, because let's be fair, red does not fit.
Would I recommend this RTA? Yes if you are looking for a top airflow, leakproof RTA. In my opinion this RTA is miles further than for example the Zeus X.
Overall, very good job Justin Lai and Oxva, keep up the good work.
Thank you for reading, let me know if you have questions!
Take care,
Sjoerd
Today I have a top airflow RTA for review, the Oxva Arbiter. The first RTA designed and produced by OXVA.
Interesting uniqueness of this top airflow RTA is that it has 100% top to bottom airflow.
Specifications:
Packaging:
- 1 x Arbiter RTA (bubble glass)
- 1 x Straight glass tube
- 2 x Fused clapton coil
- 2 x Shoelace cotton
- 1 x Accessory bag
- 1 x User manual
Review:
It is a big RTA; at the very base it measures 26.5mm but the middle of the base measures 28mm. I received two color options, black and stainless steel. Both RTA’s look great, but for me the branding is a bit overexaggerated. There is simply a bit too much branding, especially on the outer chamber, a logo and in big letter ARBITER. It would have been nice if only the logo was put onto the outer chamber. And what about the red O-rings? A strange esthetic decision in my opinion. Good news is that a 2nd batch has been produced by OXVA with matching O-rings, so for the black RTA black O-rings and the SS RTA white O-rings.
Machining wise this RTA feels extremely well made, there is however a slight difference between the black and stainless steel, and then I am mainly referring to the top-cap. The Stainless Steel one has quite sharp corners compared to the black one. It is not extremely sharp to cut yourself, but I do feel a difference. Probably because of the layer of black paint the black one is less sharp. But overall, both feel solid.
A nice-half turn top-cap uncovers two large enough fill-holes that are slightly built inside the top, meaning that you can poor liquid even on the sides and it will flow into the tank. With the bubble glass you get 6ml capacity which is proper, with straight 4ml. A tool is included in the packaging, but I have no idea what it is meant for, it is also not written in the manual. First, I thought it is used to unscrew the top-base from the tank to be able to release the airflow ring. I tried but couldn’t get it to loosen.
In general, it is easy to take apart this RTA, but the airflow ring is (as far as I tried) stuck to the top of the RTA. Wish it was possible to take off the airflow ring for cleaning purposes.
When unscrewing the deck, which has really nice threading, you will straight away know what the top to bottom airflow is about. An airflow inner piece/shaft drops out. What this piece does, it blocks all air around the deck apart from the bottom sides. Since the deck is raised up quite a bit, the airflow automatically is pushed up towards the bottom of the coils.
Wide open this tank has really a lot of airflow, like really a lot. No matter which airflow setting you have it at, it sounds very smooth. For me the best airflow setting start from half closed to ¾ closed.
It is hard to find much easier decks than this one. Because it is raised so high it is easy to clip your coils from underneath the posts. Just drop in the coils, fasten the screws and clip the coil-legs. You can get away with dual 3.5mm ID coils on this deck, but I have been mainly using it with Dual 3.0mm ID coils.
Wicking slots don’t look very big, but I think it’s an illusion because the deck is quite large. No issues wicking this RTA at all, also no need to comb out the cotton extremely much. What I did learn overtime with this RTA is that the best is to not force the cotton all the way to the bottom of the deck, but to simply ‘lay’ the end of the cotton on top of the wicking ports. When I was first wicking I kind of forced the cotton down, but that causes a massive issue with chain-vaping. Since the deck is so high, the liquid needs more time to get up there, the longer the cotton, the least success with chain-vaping. After just laying the cotton on top of the wick-port I had no issues with chain vaping.
Best part for me is the vape of this RTA. Since it is a top-airflow RTA I need to judge that way as well, because from my general experience bottom-airflow is not yet beaten (and probably won’t be) by a top airflow RTA. But this one is extremely good for a top airflow RTA, the best out there in my opinion if I am talking about the vape. Very good flavor and a very smooth airflow, no matter in which setting. Flavor wise it even gets close to my favorite flavor banger, the Dovpo Blotto.
One disappointment on this RTA is that it’s a no-no for single coil builds. I tried several coils with different ways of wicking, but the flavor is simply very blunt. And that is because the deck first is maybe a bit too big for that, and second of all the airflow system is just not made for single coils. When placing the coil in the middle, the airflow simply does not touch the coil. When putting on the side there is too much airflow from the other side coming through, taking away the flavor.
Conlusion:
A very solidly made and extremely well performing top airflow RTA. Easy to build, large capacity, smooth airflow and very good flavor.
I have only two things to complain about; not very good performer as a single coil RTA and a bit too much branding.
Also nice to see that Oxva straight away listened to the reviewers and made the adjustment with the O-ring color, because let's be fair, red does not fit.
Would I recommend this RTA? Yes if you are looking for a top airflow, leakproof RTA. In my opinion this RTA is miles further than for example the Zeus X.
Overall, very good job Justin Lai and Oxva, keep up the good work.
Thank you for reading, let me know if you have questions!
Take care,
Sjoerd
-
Locked
IN STOCK SXK EVL Dot Spot Polycarbonate RBA Bridge Clone for DotMod DotAIO
In Stock！Check this Dot Spot RBA Bridget Clone for DotAio.
Made by SXK, this clone works as a bridge for the DotMod DotAIO AIO Pod. The SXK Dot Spot RBA is made of stainless steel and polycarbonate to holds 2.0ml capacity. The tank has a refilling port on the side with silicone stopper.
The air hole is located between the two posts through which the fresh air hits the winding directly from below. The various MTL reducers, which are available in sizes 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.0mm, can also be inserted into this hole.
More details about this DotAio Accessory, please check >>
Made by SXK, this clone works as a bridge for the DotMod DotAIO AIO Pod. The SXK Dot Spot RBA is made of stainless steel and polycarbonate to holds 2.0ml capacity. The tank has a refilling port on the side with silicone stopper.
The air hole is located between the two posts through which the fresh air hits the winding directly from below. The various MTL reducers, which are available in sizes 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.0mm, can also be inserted into this hole.
More details about this DotAio Accessory, please check >>
-
Locked
230W Smok G-PRIV 3 Box Mod for only ￡37.29
- VapesourcingUK
- 0 Replies
Smok G-PRIV 3 is a powerful Box Mod, which is an upgraded version of SMOK G-Priv. Smok G-PRIV 3 is powered by two 18650 batteries, with a maximum output power of up to 230W, with multiple output modes, and a 2.4-inch large display that can display all vaping data. Buy Smok G-PRIV 3 from vapesourcing.uk now for only £37.29.
In terms of appearance, Smok G-PRIV 3 is a compact box mod. Its overall size is only 85mm x 54mm x 28mm, and it is made of zinc alloy materials. It is very sturdy and durable. The comfort. At the center of the device is a large 2.4" touch screen display, allowing for responsive adjustments and mode changes to be facilitated on the chassis without the need for buttons. There is also a standard 510 threaded interface on the top of the Smok G-PRIV 3 , You can use it with other vape tanks through the 510 interface. It’s worth noting that in VW mode, the Smok G-PRIV 3 compatible coil blocking range is 0.1ohm-2.5ohm. In TC mode, Smok G-PRIV 3 compatible coil blocking range is 0.05ohm-2.0ohm. Smok G-PRIV 3 also has a variety of colors to choose from, including: Black, Prism Gold, Purple Red, Prism Chrome.
In terms of performance, Smok G-PRIV 3 is equipped with the most advanced IQ-G chipset and is powered by two high-rate 18650 batteries. In VW mode, the minimum output power of Smok G-PRIV 3 is 1W, and the maximum output power is 230W. In TC mode, the minimum output power of Smok G-PRIV 3 is 10W, and the maximum output power is 230W. In addition, Smok G-PRIV 3 also has a variety of additional protection functions, such as Puff Monitoring System, Short Circuit Protection, Over-Heating Protection, Low-Battery Warning. It is worth noting that the battery of Smok G-PRIV 3 is removable, which means that you can replace the battery at any time without waiting for charging. Of course, you can also use the USB Type-C port to quickly charge it.
Smok G-PRIV 3 Features
Dual 18650 Batteries With Easy Access
Supports up to 230 watts of power
USB-C Port For Fast Balanced Charging
2.4 Inch Full Color HD Touchscreen
Acrylic shell pattern that has an ergonomic texture
Multiple Safety Protections
Secondary Key Simplifies Screen Lock / Unlock
Latest Updated Chipset- IQ-G chipset
Other products you might like:
SMOK Rigel Box Mod 230W
In terms of appearance, Smok G-PRIV 3 is a compact box mod. Its overall size is only 85mm x 54mm x 28mm, and it is made of zinc alloy materials. It is very sturdy and durable. The comfort. At the center of the device is a large 2.4" touch screen display, allowing for responsive adjustments and mode changes to be facilitated on the chassis without the need for buttons. There is also a standard 510 threaded interface on the top of the Smok G-PRIV 3 , You can use it with other vape tanks through the 510 interface. It’s worth noting that in VW mode, the Smok G-PRIV 3 compatible coil blocking range is 0.1ohm-2.5ohm. In TC mode, Smok G-PRIV 3 compatible coil blocking range is 0.05ohm-2.0ohm. Smok G-PRIV 3 also has a variety of colors to choose from, including: Black, Prism Gold, Purple Red, Prism Chrome.
In terms of performance, Smok G-PRIV 3 is equipped with the most advanced IQ-G chipset and is powered by two high-rate 18650 batteries. In VW mode, the minimum output power of Smok G-PRIV 3 is 1W, and the maximum output power is 230W. In TC mode, the minimum output power of Smok G-PRIV 3 is 10W, and the maximum output power is 230W. In addition, Smok G-PRIV 3 also has a variety of additional protection functions, such as Puff Monitoring System, Short Circuit Protection, Over-Heating Protection, Low-Battery Warning. It is worth noting that the battery of Smok G-PRIV 3 is removable, which means that you can replace the battery at any time without waiting for charging. Of course, you can also use the USB Type-C port to quickly charge it.
Smok G-PRIV 3 Features
Dual 18650 Batteries With Easy Access
Supports up to 230 watts of power
USB-C Port For Fast Balanced Charging
2.4 Inch Full Color HD Touchscreen
Acrylic shell pattern that has an ergonomic texture
Multiple Safety Protections
Secondary Key Simplifies Screen Lock / Unlock
Latest Updated Chipset- IQ-G chipset
Other products you might like:
SMOK Rigel Box Mod 230W
-
Locked
M Pro Mesh Coils Compared to SS904L M Mesh Coils
- Freemax
- 0 Replies
Today let’s talk about the difference between M Pro Mesh Coils and SS904L M Mesh Coils. M Pro Mesh Coils has originally paired with M Pro Mesh Tank, and SS904L M Mesh Coils are originally designed for M Pro 2 Tank. Both sub ohm tanks come with a wide range of single, dual, triple, and quad meshed coil options for best flavor. What’s more, M Pro Mesh Coils and SS904L M Mesh Coils can be compatible with each tank of M Pro and M Pro 2.
What's the difference between M Pro Mesh Coils and SS904L M Mesh Coils?
SS904L M Mesh Coils Main Features:
FM COILTECH4.0
Military grade SS904L mesh and Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton)
904L M1/M2/M3/M4 Mesh Coil
Compatible with M Pro & M Pro 2 Tank
M Pro Mesh Coils Main Features:
FM COILTECH2.0
HoneyComb Mesh with 90% Flax Fiber (Wood Pulp) Cotton and 10% Japanese Organic Cotton Formula
Single/Double/Triple/Quad/ Quintuple Mesh Coil
Compatible with M Pro & M Pro 2 Tank
What's the difference between M Pro Mesh Coils and SS904L M Mesh Coils?
SS904L M Mesh Coils Main Features:
FM COILTECH4.0
Military grade SS904L mesh and Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton)
904L M1/M2/M3/M4 Mesh Coil
Compatible with M Pro & M Pro 2 Tank
M Pro Mesh Coils Main Features:
FM COILTECH2.0
HoneyComb Mesh with 90% Flax Fiber (Wood Pulp) Cotton and 10% Japanese Organic Cotton Formula
Single/Double/Triple/Quad/ Quintuple Mesh Coil
Compatible with M Pro & M Pro 2 Tank
-
Locked
[New Released] Bmor NITRO 1000 PUFFS Disposable Kit 650mAh
Product Name: Bmor NITRO 1000 PUFFS Disposable Kit
Type: Kit
Introduction
Bmor NITRO 1000 PUFFS Disposable Kit is inspired by nitrous oxide, particularly it's way of amplifying speed and power when injected into a heated mechanical engine. It is a mini exquisite disposable kit that is powered by 650mAh Built-in Battery and can provide 1000 PUFFS to meet your all day needs. Nitro features OCS (oil coil separation). It prevents leaking 100% while maintaining the freshness of e-liquid until the very last puff.
Parameters of Bmor NITRO 1000 PUFFS Disposable Kit
Puffs: 1000
Salt Nicotine: 5%
E-liquid Capacity: 3.5ml
Battery: 650mAh Built-in Battery
Features of Bmor NITRO 1000 PUFFS Disposable Kit
➤OCS (oil coil separation)
➤Push and release
➤Up to1000 puffs
Coupon Code: NEW21
Click Bmor NITRO 1000 PUFFS Disposable Kit for more details>>>
or visit Recommend for more discounts
note: must log in for the discount
Type: Kit
Introduction
Bmor NITRO 1000 PUFFS Disposable Kit is inspired by nitrous oxide, particularly it's way of amplifying speed and power when injected into a heated mechanical engine. It is a mini exquisite disposable kit that is powered by 650mAh Built-in Battery and can provide 1000 PUFFS to meet your all day needs. Nitro features OCS (oil coil separation). It prevents leaking 100% while maintaining the freshness of e-liquid until the very last puff.
Parameters of Bmor NITRO 1000 PUFFS Disposable Kit
Puffs: 1000
Salt Nicotine: 5%
E-liquid Capacity: 3.5ml
Battery: 650mAh Built-in Battery
Features of Bmor NITRO 1000 PUFFS Disposable Kit
➤OCS (oil coil separation)
➤Push and release
➤Up to1000 puffs
Coupon Code: NEW21
Click Bmor NITRO 1000 PUFFS Disposable Kit for more details>>>
or visit Recommend for more discounts
note: must log in for the discount
-
Locked
Wotofo SMRT 2000mAh 80W VW Pod System Starter Kit
Hello, everyone
Today, we are going to introduce Wotofo SMRT 2000mAh 80W Pod System Starter Kit.
Wotofo SMRT Pod System Starter Kit consists of a Wotofo SMRT 2000mAh Pod System Battery Mod and a 4.5ml Wotofo SMRT Pod Cartridge.
Wotofo SMRT Pod System Battery Mod is powered by a 2000mAh built-in battery, enough to fire up to 80W (5~80W). It adopts the nexCHIP quickly ignite within 0.001 seconds and also provides intelligent identification of coil. With 0.96 inch TFT display and constructed from Aluminum Alloy, Wotofo SMRT Battery Mod is durable and lightweight and easy to check the vaping statistics you need, perfectly suitable for you to carry it outside.
Wotofo SMRT Pod Cartridge holds 4.5ml capacity with side filling system, made of PCTG. It adopts an adjustable air intake at the bottom. SMRT Pod Cartridge is compatible with D11 / D13 / D14 / D15 / Vaporesso GTX series Coils and Voopoo PnP-series. (Only D15 Clapton M Coil and SMRT PnP Rebuildable Coil Kit included in the package)
Four colors in total for your choice: Gold, Red, Blue, Black
More details about Wotofo SMRT Pod System Starter Kit, Please Check >> https://www.3fvape.com/48207-wotofo-smrt-pod-system-starter-kit.html
Today, we are going to introduce Wotofo SMRT 2000mAh 80W Pod System Starter Kit.
Wotofo SMRT Pod System Starter Kit consists of a Wotofo SMRT 2000mAh Pod System Battery Mod and a 4.5ml Wotofo SMRT Pod Cartridge.
Wotofo SMRT Pod System Battery Mod is powered by a 2000mAh built-in battery, enough to fire up to 80W (5~80W). It adopts the nexCHIP quickly ignite within 0.001 seconds and also provides intelligent identification of coil. With 0.96 inch TFT display and constructed from Aluminum Alloy, Wotofo SMRT Battery Mod is durable and lightweight and easy to check the vaping statistics you need, perfectly suitable for you to carry it outside.
Wotofo SMRT Pod Cartridge holds 4.5ml capacity with side filling system, made of PCTG. It adopts an adjustable air intake at the bottom. SMRT Pod Cartridge is compatible with D11 / D13 / D14 / D15 / Vaporesso GTX series Coils and Voopoo PnP-series. (Only D15 Clapton M Coil and SMRT PnP Rebuildable Coil Kit included in the package)
Four colors in total for your choice: Gold, Red, Blue, Black
More details about Wotofo SMRT Pod System Starter Kit, Please Check >> https://www.3fvape.com/48207-wotofo-smrt-pod-system-starter-kit.html
-
Locked
Damn Vape Doom X RTA | Airis Gethi G6 Vaporizer
- By Ema
- Sourcemore
- 0 Replies
Damn Vape Doom X RTA
Doom X RTA is a rebuildable tank atomizer designed for all Mesh fans from beginners to veterans. It is anti dry-hits and leak proof. The compact vaporizing chamber brings denser flavor and the juice flow control will save every drop of your liquid. What's more, it features the spring-loaded clamp-style build deck and 3D liquid flow, which will provide you satisfying vaping experience. The e-juice capacity is 5.5ml and can be extended to 8ml with bubble glass tube (please utilizes the thicker cotton with 8ml bubble glass on and cut your cotton as the picture hints). Doom X RTA supports mesh coil or normal coil. There are four mesh coils for you to choose: X-Mesh 01(sold separately), X-Mesh 03(included), X-Mesh 04(sold separately), X-Mesh 05(included).
Details:
1. Anti dry-hits and leak proof
2. Spring-loaded clamp-style build deck and 3D liquid flow
3. Simple wicking & building
4. Compact vaporizing chamber
5. Juice flow control system
6. 5.5ml/8ml e-juice capacity
7. Adopts mesh coil & normal coil
8. One step to go
9. Four coils to choose: X-Mesh 01(sold separately), X-Mesh 03(included). X-Mesh 04(sold separately), X-Mesh 05(included)
Airis Gethi G6 Vaporizer
Gethi G6 Vaporizer is a premium dry herb vaporizer built with 1800mAh battery capacity. It has three temperature settings (435℉/420℉/405℉) and you can adjust the temperature quickly and easily. With the 100% high-grade ceramic dry herb heating chamber, it provides you a true combustion-free vaping enjoyment. Designed with the isolated air path which will help to cool the vapor before inhalation while preserving the fresh taste of your herb, you don't need to worry about exposing your lungs to superheated vapor. It will vibrate if the heating chamber has reached your chosen temperature with the vibration mode design. The glass mouthpiece is fully replaceable and can be extended.
Details:
1. Ceramic heating chamber
2. 3 temps setting: 435℉, 420℉, 405℉
3. Isolated air path
4. Vibration mode
5. 1800mAh battery capacity
6. Discreet glass mouthpiece
7. Integrated vapor cooling technology
8. Heating chamber access
Doom X RTA is a rebuildable tank atomizer designed for all Mesh fans from beginners to veterans. It is anti dry-hits and leak proof. The compact vaporizing chamber brings denser flavor and the juice flow control will save every drop of your liquid. What's more, it features the spring-loaded clamp-style build deck and 3D liquid flow, which will provide you satisfying vaping experience. The e-juice capacity is 5.5ml and can be extended to 8ml with bubble glass tube (please utilizes the thicker cotton with 8ml bubble glass on and cut your cotton as the picture hints). Doom X RTA supports mesh coil or normal coil. There are four mesh coils for you to choose: X-Mesh 01(sold separately), X-Mesh 03(included), X-Mesh 04(sold separately), X-Mesh 05(included).
Details:
1. Anti dry-hits and leak proof
2. Spring-loaded clamp-style build deck and 3D liquid flow
3. Simple wicking & building
4. Compact vaporizing chamber
5. Juice flow control system
6. 5.5ml/8ml e-juice capacity
7. Adopts mesh coil & normal coil
8. One step to go
9. Four coils to choose: X-Mesh 01(sold separately), X-Mesh 03(included). X-Mesh 04(sold separately), X-Mesh 05(included)
Airis Gethi G6 Vaporizer
Gethi G6 Vaporizer is a premium dry herb vaporizer built with 1800mAh battery capacity. It has three temperature settings (435℉/420℉/405℉) and you can adjust the temperature quickly and easily. With the 100% high-grade ceramic dry herb heating chamber, it provides you a true combustion-free vaping enjoyment. Designed with the isolated air path which will help to cool the vapor before inhalation while preserving the fresh taste of your herb, you don't need to worry about exposing your lungs to superheated vapor. It will vibrate if the heating chamber has reached your chosen temperature with the vibration mode design. The glass mouthpiece is fully replaceable and can be extended.
Details:
1. Ceramic heating chamber
2. 3 temps setting: 435℉, 420℉, 405℉
3. Isolated air path
4. Vibration mode
5. 1800mAh battery capacity
6. Discreet glass mouthpiece
7. Integrated vapor cooling technology
8. Heating chamber access
-
Locked
VOOPOO DRAG X PLUS KIT REVIEWED BY BIGBOB2322
- By Bigbob2322
- Device Reviews
- 6 Replies
Hello again everyone and welcome back for today's review that comes from Voopoo and is on 1 of 2 new releases with the first being the Drag 3 that I reviewed earlier, If you didn't get a chance to check it out I will leave you this link. VOOPOO DRAG 3 KIT REVIEWED BY BIGBOB2322 . The 2nd release is on today's review, the Drag X Plus Kit. The Drag X Plus Kit is a single 21700, 20700 or 18650 battery device with the supplied adaptor in the kit. The Drag X Plus has a wattage range of 5-100w with a couple of vaping modes of your choice. Before the review let's get to know the Voopoo Drag X Plus a little bit.
COLOR CHOICES
INCLUDED WITH THE KIT
DIMENSIONS
PARAMETERS
BATTERY CHOICES 21700, 20700, 18650 WITH ADAPTER
SMART MODE AND RBA MODE
LIGHTWEIGHT AS WELL AS PORTABLE
POWER AND VERSATILITY
MAX 100 WATT POWER OUTPUT
GENE.FAN 2.0 CHIP
EIGHT SAFETY PROTECTIONS
ALL NEW TPP POD/TANK
COMPATIBLE WITH ALL PNP POD/TANKS
UNIVERSAL 510 INTERFACE
NEW TPP COILS
SAME POWERFUL MAGNET ATTACHMENT SYSTEM
DUAL DISPLAY THEMES
FIRST IMPRESSIONS
Opening up the package and sliding out the container from the sleeve reveals the device and pod/tank sitting in a foam cutout with the kit contents in a rectangular box below them. Inside the box are your coils, charge cable, 18650 battery adapter and user manual. Presentation was good but had a bit of trouble getting the rectangular box containing the kit contents out because of tightness, be careful and take your time getting the box out or you risk ripping it.
510
The 510 of the Voopoo Drag X Plus is located on the back side of the top of the device and any 24mm atomizer will work except a atomizer with a squonk pin in it of course. The 510 does have cuts in it that go all the way to the end so if you connect a atomizer to it that gets the air supply from the 510 you are good to go, also the 510 plate is very slightly raised and will help protect the finish of the top plate from getting scratches from atomizer bottoms.
FIT AND FINISH
The Drag X Plus has a body of what I think is a magnesium alloy because of it's lightweight but don't quote me on that. The finish on my review device has a gunmetal color that matches the pod/tank very well as does the Drag branding that has raised letters and sits in a rectangular box above the spine of the device. All corners are rounded off making the device very comfortable to use. The inner body of the device has a very soft leather that carries across the spine of the device as well. There is some branding on both sides at the bottom with one side having Gene and the other having Voopoo, both are attractive little markers that I don't find intrusive at all.
BATTERY DOOR
The battery door is located on the bottom of the device and seems to be a very secure door, I never had a accidental opening of it in the time I've used it. Battery polarity is marked on the battery door itself with a negative - symbol, there is no marking for battery polarity inside the battery tube. Although I don't recommend using any device as a battery charger the Drag X Plus gives the user 5v fast 2a type-c charging if you are in a pinch with no battery charger handy.
COILS AND POD/TANK
As you can see in the contents of the kit, Voopoo has a new Pod/Tank called the TPP and it's juice capacity has been increased to 5.5ml from the PNP Pod/Tank, and with the new Pod/ Tank come new coils for it. The new coils are the TPP-DM2 0.2Ω and the TPP-DM1 0.15Ω and both are mesh coils with the 0.2Ω rated for between 40-60w and the 0.15Ω rated between 60-80w. The new TPP coils are considerably larger than the previous PNP coils and also have a larger diameter as well as the wicking surface also has been increased. Everything is the same as the proven PNP such as the airflow selector on the 510 adaptor base, connection method which remains strong magnets at the bottom of the Pod/Tank as well as the fill port still in the same spot at the bottom of the Pod/ Tank. You now have the ability to use your own drip tips if you wish, I have no problem using the supplied drip tip finding it to be comfortable to use. Below is a photo of the coils increased diameter as well as larger wicking material. One thing that I want to point out is that all PNP Pod/Tanks will work in the 510 adapter including the Voopoo RTA Pod/Tank.
DISPLAY SCREEN
The tradition of a big bright and vivid display screens of past Voopoo devices continues in one of their latest releases. The display screen is very bright being able to view it in direct sunlight and the lettering as well as numbers are very crisp and vivid as well as colorful no matter which modes you choose to use with each having their own color.
VAPING MODES
SMART MODE - ( YELLOW COLOR )
Voopoo gives the user a smart mode that limits the wattage that the user can increase to , only allowing wattage to be adjusted to the maximum wattage of the Voopoo coil that's being used so the user can't burn out a coil with too much wattage for said coil, another feature of smart mode is that Voopoo starts the user off with a suggested wattage for said coil, this is just a starting wattage for the user to begin vaping safely. you can rest knowing that in smart mode you won't burn out your coil prematurely. Smart mode allows the user to reach 80w maximum.
RBA MODE - ( BLUE COLOR )
In the RBA mode you can use your own atomizers and put the desired built of your choice and have a maximum wattage output of 100w, you can use RBA mode when using Voopoo coils for a different color screen but you will lose the suggested coil starting wattage recommendation.
DUAL UI THEMES
I am very happy to inform you that Voopoo has kept the 2 themes used in previous devices, both look and operate fine but having a choice makes it nice especially for myself because although the Iron theme is a straight forward look of information on the display screen I prefer the Core theme because it is different from the ordinary looking screen that have been shown in the above pictures, below is the Core display theme screen.
CLASSY APPEARANCE
Since receiving both of Voopoo's new Drag kits they have been with me everyday at work or our running errands and although the Drag 3 is a more of a traditional box mod, it's rounded corners and somewhat slim design fit just fine in a jacket pocket, but the Drag X Plus is even more versatile when out and about. Both are very attractive as each have their own identity in the looks department there is a special classy look with the Drag X Plus. IMO
FINAL IMPRESSIONS
My final impressions are that I like the Drag X Plus very much and the new TPP pod/tank and coils perform great while giving us vapers more juice capacity with the option to use your own drip tip if you desire to do so but the supplied drip tip is very comfortable and works just fine, I saw no need to change it for one of my own.
Both of the new TPP coils perform very well giving off slightly better flavor than the proven PNP coils. With the increased diameter of the TPP coils you will get a lot more airflow as well as vapor so be careful not to set off any smoke detectors ( I have already ) . LOL
Keeping the diameter of the new TPP pod/tank the same as the PNP pod/tank is fantastic because users that already own PNP pod/tank's can interchange each using the 510 adapter of either pod/tank
The mod has never failed me in the time I have been testing it and it fires instantly without hesitation. Buttons are solid and firm and match the color of the metal which also adds to it great appearance. The display screen is very informative with a bright vivid array of your 2 color choices as well as themes.
There are only 2 cons that I have with this kit and the pros far out weight the 2 cons and they are #1 when the airflow is closed down to half or lower a slight whosh sound develops and the 2nd con is you can't lock wattage adjustments only, when you lock you are locking the entire device from operating, turning it off serves the same purpose.
So the big question is do I recommend the Drag X Plus, the answer is a resounding yes I do recommend this kit. It has given me 0 problems and functioned flawlessly for me in the time I've been reviewing it, with great flavor and vapor the TPP will be the new flagship in the pod/tank of Voopoo's new devices.
I would like to thank Chloe and Voopoo for providing the Drag X Plus for the purpose of this review, and I also hope that this review helped anyone looking to purchase the Drag X Plus from Voopoo.
THANK YOU
BIGBOB2322
COLOR CHOICES
INCLUDED WITH THE KIT
DIMENSIONS
PARAMETERS
BATTERY CHOICES 21700, 20700, 18650 WITH ADAPTER
SMART MODE AND RBA MODE
LIGHTWEIGHT AS WELL AS PORTABLE
POWER AND VERSATILITY
MAX 100 WATT POWER OUTPUT
GENE.FAN 2.0 CHIP
EIGHT SAFETY PROTECTIONS
ALL NEW TPP POD/TANK
COMPATIBLE WITH ALL PNP POD/TANKS
UNIVERSAL 510 INTERFACE
NEW TPP COILS
SAME POWERFUL MAGNET ATTACHMENT SYSTEM
DUAL DISPLAY THEMES
FIRST IMPRESSIONS
Opening up the package and sliding out the container from the sleeve reveals the device and pod/tank sitting in a foam cutout with the kit contents in a rectangular box below them. Inside the box are your coils, charge cable, 18650 battery adapter and user manual. Presentation was good but had a bit of trouble getting the rectangular box containing the kit contents out because of tightness, be careful and take your time getting the box out or you risk ripping it.
510
The 510 of the Voopoo Drag X Plus is located on the back side of the top of the device and any 24mm atomizer will work except a atomizer with a squonk pin in it of course. The 510 does have cuts in it that go all the way to the end so if you connect a atomizer to it that gets the air supply from the 510 you are good to go, also the 510 plate is very slightly raised and will help protect the finish of the top plate from getting scratches from atomizer bottoms.
FIT AND FINISH
The Drag X Plus has a body of what I think is a magnesium alloy because of it's lightweight but don't quote me on that. The finish on my review device has a gunmetal color that matches the pod/tank very well as does the Drag branding that has raised letters and sits in a rectangular box above the spine of the device. All corners are rounded off making the device very comfortable to use. The inner body of the device has a very soft leather that carries across the spine of the device as well. There is some branding on both sides at the bottom with one side having Gene and the other having Voopoo, both are attractive little markers that I don't find intrusive at all.
BATTERY DOOR
The battery door is located on the bottom of the device and seems to be a very secure door, I never had a accidental opening of it in the time I've used it. Battery polarity is marked on the battery door itself with a negative - symbol, there is no marking for battery polarity inside the battery tube. Although I don't recommend using any device as a battery charger the Drag X Plus gives the user 5v fast 2a type-c charging if you are in a pinch with no battery charger handy.
COILS AND POD/TANK
As you can see in the contents of the kit, Voopoo has a new Pod/Tank called the TPP and it's juice capacity has been increased to 5.5ml from the PNP Pod/Tank, and with the new Pod/ Tank come new coils for it. The new coils are the TPP-DM2 0.2Ω and the TPP-DM1 0.15Ω and both are mesh coils with the 0.2Ω rated for between 40-60w and the 0.15Ω rated between 60-80w. The new TPP coils are considerably larger than the previous PNP coils and also have a larger diameter as well as the wicking surface also has been increased. Everything is the same as the proven PNP such as the airflow selector on the 510 adaptor base, connection method which remains strong magnets at the bottom of the Pod/Tank as well as the fill port still in the same spot at the bottom of the Pod/ Tank. You now have the ability to use your own drip tips if you wish, I have no problem using the supplied drip tip finding it to be comfortable to use. Below is a photo of the coils increased diameter as well as larger wicking material. One thing that I want to point out is that all PNP Pod/Tanks will work in the 510 adapter including the Voopoo RTA Pod/Tank.
DISPLAY SCREEN
The tradition of a big bright and vivid display screens of past Voopoo devices continues in one of their latest releases. The display screen is very bright being able to view it in direct sunlight and the lettering as well as numbers are very crisp and vivid as well as colorful no matter which modes you choose to use with each having their own color.
VAPING MODES
SMART MODE - ( YELLOW COLOR )
Voopoo gives the user a smart mode that limits the wattage that the user can increase to , only allowing wattage to be adjusted to the maximum wattage of the Voopoo coil that's being used so the user can't burn out a coil with too much wattage for said coil, another feature of smart mode is that Voopoo starts the user off with a suggested wattage for said coil, this is just a starting wattage for the user to begin vaping safely. you can rest knowing that in smart mode you won't burn out your coil prematurely. Smart mode allows the user to reach 80w maximum.
RBA MODE - ( BLUE COLOR )
In the RBA mode you can use your own atomizers and put the desired built of your choice and have a maximum wattage output of 100w, you can use RBA mode when using Voopoo coils for a different color screen but you will lose the suggested coil starting wattage recommendation.
DUAL UI THEMES
I am very happy to inform you that Voopoo has kept the 2 themes used in previous devices, both look and operate fine but having a choice makes it nice especially for myself because although the Iron theme is a straight forward look of information on the display screen I prefer the Core theme because it is different from the ordinary looking screen that have been shown in the above pictures, below is the Core display theme screen.
CLASSY APPEARANCE
Since receiving both of Voopoo's new Drag kits they have been with me everyday at work or our running errands and although the Drag 3 is a more of a traditional box mod, it's rounded corners and somewhat slim design fit just fine in a jacket pocket, but the Drag X Plus is even more versatile when out and about. Both are very attractive as each have their own identity in the looks department there is a special classy look with the Drag X Plus. IMO
FINAL IMPRESSIONS
My final impressions are that I like the Drag X Plus very much and the new TPP pod/tank and coils perform great while giving us vapers more juice capacity with the option to use your own drip tip if you desire to do so but the supplied drip tip is very comfortable and works just fine, I saw no need to change it for one of my own.
Both of the new TPP coils perform very well giving off slightly better flavor than the proven PNP coils. With the increased diameter of the TPP coils you will get a lot more airflow as well as vapor so be careful not to set off any smoke detectors ( I have already ) . LOL
Keeping the diameter of the new TPP pod/tank the same as the PNP pod/tank is fantastic because users that already own PNP pod/tank's can interchange each using the 510 adapter of either pod/tank
The mod has never failed me in the time I have been testing it and it fires instantly without hesitation. Buttons are solid and firm and match the color of the metal which also adds to it great appearance. The display screen is very informative with a bright vivid array of your 2 color choices as well as themes.
There are only 2 cons that I have with this kit and the pros far out weight the 2 cons and they are #1 when the airflow is closed down to half or lower a slight whosh sound develops and the 2nd con is you can't lock wattage adjustments only, when you lock you are locking the entire device from operating, turning it off serves the same purpose.
So the big question is do I recommend the Drag X Plus, the answer is a resounding yes I do recommend this kit. It has given me 0 problems and functioned flawlessly for me in the time I've been reviewing it, with great flavor and vapor the TPP will be the new flagship in the pod/tank of Voopoo's new devices.
I would like to thank Chloe and Voopoo for providing the Drag X Plus for the purpose of this review, and I also hope that this review helped anyone looking to purchase the Drag X Plus from Voopoo.
THANK YOU
BIGBOB2322
