2nd Edition Cartomizers - Won't sell to US now !!!
- Thread starter Craymar
- Start date
- th_trl_thread_readers 0
- Status
What was the
topic?
hard to tell once zelda shows up, lol
guys are so easily sidetracked, right scottbee?
actually i will make a new video when i get back that should solve alot of questions, cause i just had a brainfart a few minutes ago and inspected all my e2's found the ones with tight coils and tight wick and seperated those form the ones that have a loose coil around the wick and the wick itself looks fluffed out at the ends of the coil as well.
i tested my theory out with 3 and 3 and so far the theory is proving right, i will test with 5 on 5 and see how that goes and record it for you all.
i tested my theory out with 3 and 3 and so far the theory is proving right, i will test with 5 on 5 and see how that goes and record it for you all.
hard to tell once zelda shows up, lol
guys are so easily sidetracked, right scottbee?
I see your lips move, but I can't hear what you're saying.......
I don't think that's really going to be an issue. Even if a syringe turns out to be the preferable way to refill these, just carry enough filled cartos with you to get through the day. If you have an extended trip just pack a syringe in your luggage.
Personally, syringe filling sounds faster and less messy than my current carto filling routine - which involves condom filling/spinning about 20 at a time. I usually go through about 8 paper towels and stop to wash my hands several times before I'm done. Pre-filling with a syringe just might be a step forward (for me, anyway).
Ok, but try to keep it under 5 or 6 minutes. I tend to vape along with you while I'm watching and it gives me a headache.
I don't think that's really going to be an issue. Even if a syringe turns out to be the preferable way to refill these, just carry enough filled cartos with you to get through the day. If you have an extended trip just pack a syringe in your luggage.
Personally, syringe filling sounds faster and less messy than my current carto filling routine - which involves condom filling/spinning about 20 at a time. I usually go through about 8 paper towels and stop to wash my hands several times before I'm done. Pre-filling with a syringe just might be a step forward (for me, anyway).
there is a little plastic bottles with a long pointy nose, almost like elmurs glue bottle but thinner an longer. , cant we fil that with juice and carry that around, the new holes are bigger form what nav mentioned so that might be the way to go instead of carrying around a needle, but at home a needle is just fast and simple, once it fills up you can see when to stop.
Since this design has concentric cylinders and a raw-liquid reservoir... I'm sure one of the first knock-offs (assuming it gets that far) will incorporate a fill port. I have one on my SuperTornego II and it makes refilling a snap. Right from the bottle. Clean with no hassles.
Personally, syringe filling sounds faster and less messy than my current carto filling routine - which involves condom filling/spinning about 20 at a time. I usually go through about 8 paper towels and stop to wash my hands several times before I'm done. Pre-filling with a syringe just might be a step forward (for me, anyway).
Haha, how are you going to write off that hospital grade centrifuge you bought?
if i remember right from the co-op, rs now packs a special gadget for filling with every order of 30 cartos
Haha, how are you going to write off that hospital grade centrifuge you bought?
I *fill* 20 at a sitting. I *spin* 1 at a time.
I understand.
But a fill port allows access from the "outside", through the outer wall. Therefore you don't need to remove the mouthpiece.
I'm gonna go mess with these things some more (gets dremmel and xacto knives) BRB
After dealing with microcig, eliquid.cn and royalsmokers I will never buy another product from them directly and will check to see if I can get a similar product manufactured by anyone else in the future. They are insulting and rude. I will not get into further detail about my converse with them.
I am personally boycotting them until another company comes out with a knock-off of these which will undoubtedly be better.
This is not a suggestion that others do the same. Just my opinion and my actions.
I am personally boycotting them until another company comes out with a knock-off of these which will undoubtedly be better.
This is not a suggestion that others do the same. Just my opinion and my actions.
I wouldn't hold my breath on the knock offs. The reason I've been holding the pics of the internal design is because he waiting to get the patent finalized. Then again, change the design the slightest bit and you have a new patent so who knows.
patent or not, they will be knocked off in 2 months top, all thats needed is a light design change and the kockoffs will come and maybe with improvements but thats a different discussion for a different day
badkolo,
We got our first batch in and have been testing these for 2 days so far. Do you have a multimeter to test the resistance. If you have posted it already please excuse my asking as I must have over looked it.
Ours are coming in at 4.0-4.1 ohms and in the same shipment we are already finding that some have the "slit" in which holds the coil and some do not. The ones that do are performing better than expected. Especially on the WetBox because you can constantly keep it soaked. The ones without are definitely having wick issues.
Viscosity is another big factor with the ones without the coil slot (whatever one wants to call it). Halo Liquid is performing like a champ with these things. However anything with VG is having issues.
I'm not going to get the same discussions started over but wanted to share our experiences so far and see what resistance yours was coming in at.
Thanks
We got our first batch in and have been testing these for 2 days so far. Do you have a multimeter to test the resistance. If you have posted it already please excuse my asking as I must have over looked it.
Ours are coming in at 4.0-4.1 ohms and in the same shipment we are already finding that some have the "slit" in which holds the coil and some do not. The ones that do are performing better than expected. Especially on the WetBox because you can constantly keep it soaked. The ones without are definitely having wick issues.
Viscosity is another big factor with the ones without the coil slot (whatever one wants to call it). Halo Liquid is performing like a champ with these things. However anything with VG is having issues.
I'm not going to get the same discussions started over but wanted to share our experiences so far and see what resistance yours was coming in at.
Thanks
im not sure what ohm but some get hotter then others, also look down the to the coil on a fresh one, if the coil is really tight then it will get that burning issue but the ones that look like the coil is looser , those work like a champ, you can also fluff the wick a little on the tighten coiled ones to help alleviate the issue .
like i said, the ones that work , work incredibly well. now its about getting the fix on the whole line they produce and to make sure its all consistant.
WHERE can i go buy a multimeter. ill go get one .
OK i got a multimeter, now if someone would have the decency to tell me how to test these. thanks in advance.
Last edited:
- Status
Similar threads
- Locked
- Locked
