I only got the one Kanthal and the one Ni200 Head that was in the Kit. They didn't have any cCell Head packs yet, so they couldn't send me any. This is why I'm trying to be diligent with this Ni200 Head.
75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil
- Thread starter 100%VG
- Start date
- th_trl_thread_readers 0
-
- Tags
- target 2 vtc vaporesso
- Status
That's why I'm cleaning it out for another juice. I'm trying to give them a good evaluation. I'll keep you posted... but only if you let me use your oven. I'm starting to wonder about you. I thought you were really interested in this thing.
Thanks. I am interested in the coils. I'm not interested in putting them in my oven!
Hiya Tibs.
i'll check back tomorrow
May I borrow your self-cleaning oven?
You can answer tomorrow.
I love the first impressions and commentary. I will be impatiently waiting for more details. Hopefully we will get some of these other questions answered. Great work!The Manual says that the Ceramic is an Aqueous Ceramic. In a very brief 10 minute search for Aqueous Ceramic, this appears to be another form of Aluminum Oxide Ceramic, or AO Ceramic, which was what I used in my AGA-T2 as 1/8" Sticks. I'm not trying to say that's what these cCell Heads are made of just yet, but the Ceramic is white, too.
The Ni200 Head was very clean with no "burn-in time", if you will. Instant clean taste of nothing but my E-Liquid.
The Target Tank is bottom-fill. I eased quite a few drops onto the Ceramic, not even a whole drop at a time with my glass eyedropper, not wanted it to run down inside and flood or cause an issue. The Manual says to let the Head soak in a Full Tank for 2 minutes before vaping, so I waited, even though I had Primed it some.
I commented in the thread here that the Target Mod looked to be Plastic, but it's not! This is a good thing. The Manual says it is Zinc Allow and Stainless Steel, though the SS Type is not mentioned. The Battery Door/Cover has a nice weight to it and is held in place very well and securely by two Rare Earth magnets. I hear no rattle of anything and the door doesn't have any movement unless I tug on it sideways. But no movement in normal usage.
The so called "Gun" look cannot be seen at all when held in the hand. The Firing button is easily accessible and is easy to use with the Index Finger or Thumb, both Left-handed and Right-handed (I just tried both). I never thought that it looked much like a "Gun" anyway, and still don't. It is rather small and very comfortable in the hand. The OLED Screen is reversible with 3 clicks of the Vape Button. The Mod buttons can be Locked, but doing so also locks the device from being used. This was their was of preventing accidental firing.
I installed a fully charged IMREM 38 Amp 2600mAh 18650 with the filled tank already on the Mod (yes, I know it's not really a 38A battery). It powered up when the battery was installed, which I like. 5 fast clicks turns it Off and On. I haven't tried the device outside in bright sunlight yet, but the screen seems to be plenty bright enough. The (+) and (-) button placement is very convenient, and the USB Charging Port is below them, so it's great to have a Mod that doesn't need to be laid on its side to charge. Whether or not the Mod can be used in Passthrough Mode with charging is not stated, so I'm not going to try it.
This is not a full review, and I will be adding more.
PS:
I will be using the Mod and Ni200 cCell exclusively to see how long the Head lasts. I'll let you know.
Post PS:
Sinter On!
Hiya Tibs.
May I borrow your self-cleaning oven?
I guess that's a No.
and woohoo for our tweety!
1 tank coming to her courtesy of hg!
Can't wait to hear your impressions!
.
and woohoo for our tweety!
1 tank coming to her courtesy of hg!
Say what????
Lemme look...
You got sintered!Say what????
Lemme look...
You got sintered!
I sure did!
WTG Kat, let us know A.S.A.P. what you think of it.
Will do... The only problem is the coils... They are not even available yet.
Sintered asunder!let's hope the tank comes with a sintered coil
if not we shall tear hg asunder!
Ahhh, I knew I could come in here for some sintering conversation! Congratulations, Katya, on your win!
Thank you, 100%, for your first impressions. I love the highlighting of important parts of the instruction manual! I am a little thrown off by the "don't let your tank go dry" thing, though. Isn't that why we TC? I will be following along closely to see what happens next. Oh and one other very important question! Are the buttons orange??? I am assuming not, but since I want a PINK Target, I figured I had better make sure.
Thank you, 100%, for your first impressions. I love the highlighting of important parts of the instruction manual! I am a little thrown off by the "don't let your tank go dry" thing, though. Isn't that why we TC? I will be following along closely to see what happens next. Oh and one other very important question! Are the buttons orange??? I am assuming not, but since I want a PINK Target, I figured I had better make sure.
It looks like if you are only getting the Tank, you'll only be getting one 0.2Ω Ni200 cCell Head.The only problem is the coils... They are not even available yet.
Vaporesso TARGET Ceramic cCELL Tank - 3.5ml
Do you use TC yet, or only Kanthal.
Last edited:
My Black one has a reddish-orange everywhere, but the Pink one looks like everything is more of a darker pink than orange.Ahhh, I knew I could come in here for some sintering conversation! Congratulations, Katya, on your win!
Thank you, 100%, for your first impressions. I love the highlighting of important parts of the instruction manual! I am a little thrown off by the "don't let your tank go dry" thing, though. Isn't that why we TC? I will be following along closely to see what happens next. Oh and one other very important question! Are the buttons orange??? I am assuming not, but since I want a PINK Target, I figured I had better make sure.
It looks like if you are only getting the Tank, you'll only be getting one 0.2Ω Ni200 cCell Head.
Do you use TC yet, or only Kanthal.
No TC here yet, but my Evic VTC mini is hopefully somewhere on a row boat from China...
- Status
Similar threads
- Locked
