75W Vaporesso TARGET 2 VTC Kit with Ceramic cCELL Coil

Status
Not open for further replies.

Katya

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Feb 23, 2010
34,804
120,147
SoCal
I noticed that, too. But I doubt the tank itself is 72mm tall. I'll bet that includes the 510 and drip tip. I'll put a whole nickel on that one.
laugh.gif

Maybe HG made a mistake. My Subtank, 4.5ml capacity, 22 mm diameter, is only 65 mm with the drip tip.
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
They are listed on HG website...

Parameters
cCELL inside
510 SUS Drip Tip and Thread
Dimensions: 72x 22 mm
Volume: 3.5ml
Thread: 510 thread


Don't know if the DT is included, though. Most likely it is.
I haven't seen the height listed anywhere. This is what I see at Heaven Gifts...

Vaporesso TARGET 2 Ceramic cCELL Tank - 3.5ml

49f56322fea149049a7789dc00e1060e.gif


Vaporesso TARGET 2 Ceramic cCELL Tank - 3.5ml, comes with Ceramic cCELL coil, which has no wicks. The heating coil and ceramic are made together to form a coil unit. You'll have clean, pure and consistent flavor. It's a real game changer.

Parameters
Tank Diameter: 22mm
Tank volume: 3.5ml
Thread: 510

It Comes with
1 x Vaporesso Target 2 tank with a cCELL coil (0.2ohm)

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

b598092f86c60de94e41c03e52b30e0b.gif


Features
cCELL Inside Tank
No Spitting
Longer Life-cycle


5b42b0d2a6fab60605a001e9c357ecee.gif


Fill e-Juice
Replace coil unit
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
Vaporesso ORCTANK cCELL Tank - 3.5ml It comes with innovative design and unique structure - Coil Replaced from outside of Chamber (ORC). Except that, it comes with a cCELL coil.

The cCELL coil has no wicks. The heating coil and ceramic are made together to form a coil unit.

f66204bfaeff6b7559ae3f7f93079150_g.jpg


Except that, it comes with a cCELL coil?
confused.gif


Coil Replaced from outside of Chamber (ORC). Maybe that means an RBA Head is available.
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
VG... I am using the Lemo tanks on my TC mod. No problems. For non TC, use different genisys tanks with wire mesh, which I have burnt through too :facepalm:
:lol: SS Mesh is a PITA! I never had a chance to burn though a SS Mesh Wick. The coil always popped as I was trying to get it broken in. :blink: I covered mine with XS-18, which is a Silica Tubing, and then wrapped my coil around that... until I couldn't get that anymore.:( And that made a really big mess with a coil gunker like CRH. :facepalm: I loved the AO (Aluminum Oxide) Ceramic wicks in 1/8", while I could find them. Wrapped them with 0.1x0.5 Ribbon Kanthal. Great Vape!!!
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
Any thoughts and/or first impressions?
.


YES! Thoughts and first impressions, I got!

I like the tanks (both the Tarje, and the Orc), but I'm rather a no on the mod..... which looks to me like a tiny travel hair dryer. :blink:

I have little experience with anything ceramic. I could be totally wrong here, but I believe the cups of the Dripper Pro are ceramic, and break quite easily.

The only other one I have is fairly new to me and is this whatchamacallit tank:

Oh right..... Cera Vape (baby clouds). ;)

It's pyrex glass and fitted with a ceramic wick dual coil, "providing a healthier and better tasting vaping experience".

There's a bit of info on the whole ceramic wicking on their site.

http://www.ceravape.com/products/CVTANK-NANO_CVTANK-NANO/




Madames Katya and Tibs...... how did I KNOW I'd find you two here........ ;)


Thanks for bringing this to its own thread, VG. I do believe it will gain a lot of popularity!
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
YES! Thoughts and first impressions, I got!

I like the tanks (both the Tarje, and the Orc), but I'm rather a no on the mod..... which looks to me like a tiny travel hair dryer. :blink:

I have little experience with anything ceramic. I could be totally wrong here, but I believe the cups of the Dripper Pro are ceramic, and break quite easily.

The only other one I have is fairly new to me and is this whatchamacallit tank:

Oh right..... Cera Vape (baby clouds). ;)

It's pyrex glass and fitted with a ceramic wick dual coil, "providing a healthier and better tasting vaping experience".

There's a bit of info on the whole ceramic wicking on their site.

http://www.ceravape.com/products/CVTANK-NANO_CVTANK-NANO/




Madames Katya and Tibs...... how did I KNOW I'd find you two here........ ;)


Thanks for bringing this to its own thread, VG. I do believe it will gain a lot of popularity!
:lol: A tiny travel hair dryer. :lol: For tiny hair. :lol:

Since the ceramic is sintered (manufactured and molded) around the coil, and protected by the walls of the Head, I don't foresee any issues with it because of the ceramics' being fragile. It is encased. But I guess that dropping a Head from a good distance should be avoided, especially onto anything hard. And I don't think it will be taken apart for rebuilding, as the coil is sintered into the ceramic.

If the Head is popped open for inspection or an attempted rebuild, that may well crack the ceramic, but who's gonna do that until after the Head isn't working well anyway? Not me! :D
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
YES! Thoughts and first impressions, I got!

The only other one I have is fairly new to me and is this whatchamacallit tank:

Oh right..... Cera Vape (baby clouds). ;)

It's pyrex glass and fitted with a ceramic wick dual coil, "providing a healthier and better tasting vaping experience".

There's a bit of info on the whole ceramic wicking on their site.

http://www.ceravape.com/products/CVTANK-NANO_CVTANK-NANO/
@Katdarling

Just read up on those Heads a little. They use a Ceramic rod with the coil wrapped around it. I haven't been impressed with other manufacturer's Heads of this type so far, whether a solid rod or hollow. They were Hot and made a lot of Spitting. With the sintered coil in these Heads, the wire does not come into contact with the juice, so all heat to the juice is transmitted through the ceramic. I can see this making a much better tasting vape, and reducing spitting to almost zero, if not completely. :)
 
  • Like
Reactions: gerrymi

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,751
Utopia
You LOOOOOOOOOOOOVE saying sintered. :lol:

I do believe you're on to something here, oh Sir of no PG. I AM really interested in these.


As an aside, the Cera Vape tank is a no big deal tank, really. It's fine, but only purchased as a mate to the little iTazte V3. When the original 5 coils that we got come to their life's end, it may just end up in the old 'give it away' box.
 

100%VG

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2013
8,164
102,903
Starbase 12 near Risa
You LOOOOOOOOOOOOVE saying sintered. :lol:

I do believe you're on to something here, oh Sir of no PG. I AM really interested in these.


As an aside, the Cera Vape tank is a no big deal tank, really. It's fine, but only purchased as a mate to the little iTazte V3. When the original 5 coils that we got come to their life's end, it may just end up in the old 'give it away' box.
:lol: I learned a new word today. :lol:

Sintered. Sintered. Sintered.
rofl.gif
 
  • Like
Reactions: Katdarling
Status
Not open for further replies.

Users who are viewing this thread