AFS V2 and cartomizers perfected
- Thread starter emonty
- Start date
- th_trl_thread_readers 0
- Status
I can't seem to get the turbos to work though--only V4Ls. The turbos wont screw all the way down. The turbos work on a K808 battery, but I am afraid to force it on the afs connector.
Strange, they all work for me, don't worry about screwing them a little harder.
Do they work normally on the GGTS ok?
Yea most of the time, the first time I screw a brand new cartomizer the threads are a little tight but after that they are just fine. Not to worry... the metal of the carto is softer than the metal of the AFS so I don't think you will mess anything up.
Sometimes those carts are inconsistent. I use PS carts and V4L carts, seems some work and some don't.
I blame the metric system.
I blame the metric system.
At least they are very cheap and a lot more consistent then atties IMHO, so I am happy!!
Thanks for this thread, guys. I've been afraid to try 6V, cause I've blown two iAttys (i6 and i7) and a HV SLB, so i've been sticking with 3.7. At $1 a pop, who cares, so I took four cartos down to the machine shop at work, chucked them into a vise, set the stop and drilled them. Tossed in my 123As and I vaped like a fiend for hours. I thought I'd blown one after four hours, cause it stopped working. Turned out, I'd sucked my batteries dry! (Never a problem on my 18650, so I wasn't expecting it.)
As a side note, I didn't bother removing the sticker (I don't have the patience, anyway), and it's holding up fine for me. I'm using the 18650 now while I wait for my batteries to charge (since I never used them, my spares were dead too.)
The only negative comment I have about the carto is that the draw is "airier" than I like. I can't close the control ring to cut down on the flow because I'll flood the carto.
Also, for the 510 carto potential users - I use a drip tip instead of the mouthpiece or a cartridge. Works great and has an open draw. If your AFS mouthpiece doesn't fit, you could do that instead of cutting the carto down. The only problem with that is that if you flood the carto, hot bubbles of liquid shoot into your mouth when you inhale.
As a side note, I didn't bother removing the sticker (I don't have the patience, anyway), and it's holding up fine for me. I'm using the 18650 now while I wait for my batteries to charge (since I never used them, my spares were dead too.)
The only negative comment I have about the carto is that the draw is "airier" than I like. I can't close the control ring to cut down on the flow because I'll flood the carto.
Also, for the 510 carto potential users - I use a drip tip instead of the mouthpiece or a cartridge. Works great and has an open draw. If your AFS mouthpiece doesn't fit, you could do that instead of cutting the carto down. The only problem with that is that if you flood the carto, hot bubbles of liquid shoot into your mouth when you inhale.
I totally agree... at a buck a piece, it's no big loss if one doesn't fit or is DOA. I even managed to pop one last night (I think I probably got a little generous with the hammer) but it doesn't pain my heart nearly as much as an atty.
Just need to find a HV cartomizer so I can use my Big Storm
Then I can die a happy man.
Hopefully coming soon (to the UK at least)Just need to find a HV cartomizer so I can use my Big Storm
You guys always get the cool stuff first:
1) The Black Plague
2) Austin Powers
3) The Euro
4) HV Carts
5) Beer
I always read your posts with a sexeh english accent in my head, so at least that makes it a bit less painful.
I think you'll find that UK residents view numbers 1 and 3 pretty similarly and don't want either on these shores any time soon........
And you edited your post to add that bit about the accent......
And you edited your post to add that bit about the accent......
I did... not telling you made me feel like a peeping thomas*
*Note I used "Thomas" instead of Tom to sound more distinguished... I also typed that in my best accent.
Thankyou from the bottom of my heart for making me smile on what is fast feeling like the worst day ever.
Now I saw it!Guys, I found the trick to make 510 work with the current AFS! I made the proper adapter for 510 so no modification needed to 510
I will make them soon and I will sell them very cheap just to please you guys. The adapter is almost same as this little strange brass connector that AFS has but its for 510 now. The price will be at 16 euros. Are you happy?????????
Also, about 510 cartomizers and kr808 cartomizers, well, I ordered 5 of each to test them, now, a month later I have still 5 kr808 and 150 510 cartomizers. I think I made my point
Resistance of (my) 510 cartomizers is 2.9 Ohm but vape very close to 510 (I guess that 2.9 Ohm can do the job when the coil is longer as in cartos). (my) kr808 are 3.2 Ohm but don't vape good.
What are you going to do with that sleeve then?
Just noticed what you said here.
I can't not....
Meaning I must vape at 7.4v
But you already knew that.
So I read the entire thread.
any chance of someone updating a summary.
I am using 510 carto's .
The only requirements are plunking down a chunk of change for the AFS and maybe a mouth piece? drilling holes? and vaping like a madman??
any chance of someone updating a summary.
I am using 510 carto's .
The only requirements are plunking down a chunk of change for the AFS and maybe a mouth piece? drilling holes? and vaping like a madman??
Imeo needs to bring out the 510 brass adapter for use with 510's. the mouthpiece is very nice and is a must have. No drilling holes for 510 as they breath through the slots......until then: get 901 carto's or use atties
Hi the Family
I've tested one of those Turbo Cartomizer (Thank's again Emonty my Friend ), and...it's just amazing !!
This is really the best taste I ever had in 8 months of vaping !!! And the biggest cloud of vapour too (but as I always use 0mg nic now, the taste is the most important for me).
So, I went to make an order (10x5 ), as you can see, they're adopted
YouTube - AFS V2 with Cartomizer
++
Romain
I've tested one of those Turbo Cartomizer (Thank's again Emonty my Friend
), and...it's just amazing !!This is really the best taste I ever had in 8 months of vaping !!! And the biggest cloud of vapour too (but as I always use 0mg nic now, the taste is the most important for me).
So, I went to make an order (10x5 ), as you can see, they're adopted
YouTube - AFS V2 with Cartomizer
++
Romain
Hi the Family
I've tested one of those Turbo Cartomizer (Thank's again Emonty my Friend
This is really the best taste I ever had in 8 months of vaping !!! And the biggest cloud of vapour too (but as I always use 0mg nic now, the taste is the most important for me).
So, I went to make an order (10x5 ), as you can see, they're adopted
YouTube - AFS V2 with Cartomizer
++
Romain
Great start!
Great succession!!
Great end!!!
A great movie from a great GG vaper
Thanks buddy, you are the best
- Status
Similar threads
