Thank God it has nothing to do with that 
Are YOU a Tootle Puffer??
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
-
- Tags
- tootle puffer
- Status
alden, thanks
I think I prefer the 3/32 bit for the mini, and even the lite. I just watched the "pancake" wicking video. I think I'll try that the next time I load up. I just wonder if my higher VG (DIY now) juices just can't get through the channels. Having the same problem with my STM deckI'm so excited to build, but it sucks when I can't wick right....
A kayfun, right? those work great with 7/64 size coils too, which might work better with thicker juice than smaller coils do.
Andria
I should send you some of my empty bottles and you can send me some tasty juice to tryYeah, those are great mods; it caught my eye when I was just browsing idly at FT, then I discovered the real Smok version, which is much better looking and apparently a great deal better quality.I got my 3 Kicks also; great shipping from there! Those must be some long-legged cows!
I'm at a point at the moment where I don't really *need* anything, though I do plan to get another 120ml of nic on payday (Friday), and it's time to buy some more 30ml amber glass bottles, and I may go ahead and restock on PG/VG too; my husband got 60 hrs last week, so this check is going to ROCK -- one of his co-workers is out with a broken wrist, and his boss was on vacation last week, so he got a ton of OT.
Andria
I should send you some of my empty bottles and you can send me some tasty juice to try
well.. I could give you the recipes?
I've been working on my Strawberry & Cream recipe lately, to bring the flavoring down a bit closer to sanity... the total flavoring is now about 28.5% instead of 32% -- and it's still really good. I've been tinkering with my Smocha too, since I got another Inawera to try in it; it's one of those that has a lot of chocolate in it -- that I don't taste; all I can really taste is the coffee and tobacco, but it's good.Neither of them requires steeping, which is why I learned to do that high-flavoring-mix thing. Ain't nobody got time fo dat.
Andria
As full on hobbiest as I've taken vaping... Still haven't ventured into mixing juicewell.. I could give you the recipes?
Neither of them requires steeping, which is why I learned to do that high-flavoring-mix thing. Ain't nobody got time fo dat.
Andria
Smoocha sounds yummy.....i love coffee flavors
Seriously though, I have 8 empty (or soon to be) 30 mil amber bottles with your name on them.....
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
As full on hobbiest as I've taken vaping... Still haven't ventured into mixing juice
Smoocha sounds yummy.....i love coffee flavors
It's really not difficult, but there's a learning curve, which mainly involves trying enough different flavors to know what you like, which flavors are weak, which strong, what mixes well together, and in what proportions -- kinda like cooking, actually, though it's with these concentrated flavors in a whole different form -- trying to get the essence of baked goods is hard and requires a lot of flavors; I've found that sticking with fruit and cream is a better way to success -- that strawberry and cream was one of my first from-scratch efforts, and my very first big success. The Smocha evolved from trying to clone Long Bottom Leaf Pipe Sauce; not sure how close I got to that, but at some point I realized it was good and I should stop worrying about cloning an exact flavor.
Andria
If you ever look at the car windows of vg vapers you would understand it. Their windows have a film stuck to them on the inside or so I've heard from many vg vapers. I believe thats what it does to our lungs cutting off the little pores that we get air into our bloodstream. With me and you that matters and I'm hoping it's not doing damage that will show up later in life to the others that don't have that problem now.I can't vape more than about 15%-16% VG or I just can't breathe. As far as I know, I'm not allergic to glycerin; I had severe acne in my teens, and I found Neutrogena soap very soothing, calming my skin down. But it just seems too heavy for my lungs; I start to feel it, like there's something in there I cannot cough up, no matter how hard I try. Then I wake up in the night with terrible asthma attacks, and that is scary -- so I keep the VG at a serious minimum. However I have also experienced that irritation from PG, when I once vaped 90% PG for about a week; my throat was cherry red, but I had no fever -- just burned raw throat, sinuses, and nasal passages. It was similar to a headcold but without any lower respiratory involvement -- my lungs do fine with 90% PG, but my upper respiratory passages can't handle that much.
Good thing I love TH, I guess.
Andria
My hero. I have every movie he ever made.Oui,....... I reckon
I played with the Pancake wick a while back and seems like another RT gimick for YouTube hits IMHO.alden, thanks
I think I prefer the 3/32 bit for the mini, and even the lite. I just watched the "pancake" wicking video. I think I'll try that the next time I load up. I just wonder if my higher VG (DIY now) juices just can't get through the channels. Having the same problem with my STM deck
I build my ivogo mini with 7 wraps of 28g on 2.4mm.
Coil wrapping | Steam Engine | free vaping calculators
Wicking with Japanese cotton I remove both smooth sides of the piece, bunny ear and tuck keeping the juice channels clear. 90% of my juices are MaxVG and they wick fine in the mini with just the stainless stel tank. I have found that the PMMA tank is a little narrower than the steel section and higher VG juice has a hard time getting through. So now I just run with the two stainless pieces and you get used to knowing when the tank is running low.
Well here is the win from Flavor Crafter's I picked up tonight at the post office.
The bottle in front "FECK OFF!" is a nice Irish Coffee, amazing flavor on the mesh build in the Origenny.
The bottle in front "FECK OFF!" is a nice Irish Coffee, amazing flavor on the mesh build in the Origenny.
Dare I even ask...Hi TP'ers (and I guess that now includes Ms. Roo).
I had the best luck with a coil tonite!! Yeppers, I used a 3/32 drill bit, and plunged a big gash in one section of a blister pack of BVCs. I then bunny ear'd it all the way full with liquid to saturate the pretty little invisible wicking. No over flows, and not a chance of a dry hit! I took that loverly little saturated thing and mounted it straight into the tank base! Bada boom baby! I would say it was perpendicular to perfection.
Then I fanned it horizontally, vertically, parallelily, and sang its praises. I peeled it a grape. Finally, I trimmed nothing, by 0% on all 7 sides. The shoulders shrugged in utter delight. A simple flick of a screwdriver to push aside the un-used toothpick, and I was done!
(Oh, I did glue the floor to the wall inside the chimney, just for good measure.)
Missed you guys! Hugs all around~
Hi TP'ers (and I guess that now includes Ms. Roo).
I had the best luck with a coil tonite!! Yeppers, I used a 3/32 drill bit, and plunged a big gash in one section of a blister pack of BVCs. I then bunny ear'd it all the way full with liquid to saturate the pretty little invisible wicking. No over flows, and not a chance of a dry hit! I took that loverly little saturated thing and mounted it straight into the tank base! Bada boom baby! I would say it was perpendicular to perfection.
Then I fanned it horizontally, vertically, parallelily, and sang its praises. I peeled it a grape. Finally, I trimmed nothing, by 0% on all 7 sides. The shoulders shrugged in utter delight. A simple flick of a screwdriver to push aside the un-used toothpick, and I was done!
(Oh, I did glue the floor to the wall inside the chimney, just for good measure.)
Missed you guys! Hugs all around~
I hope you have a chance to make a video. This technique could be a real breakthrough!
Troll.... NICE HAUL, buddy! {snickers at "Feck Off"}
Thanks, everyone, for the tips. Andria - yup, kayfuns (clones anyway). I did finally learn I had to build a bigger coil for them - I'd been getting so many dry hits, I'd put them down for a couple of months before I tried breaking back out.
The only maddening thing is getting that tank all loaded up, then *HACK* - dry hit. Gotta drain the tank, futz with the wick and the coil (or replace the wick if it got burnt), reload.... I guess that's my Mr. Miyagi "Wax On/Wax Off" training....
Hope y'all have a great day
Thanks, everyone, for the tips. Andria - yup, kayfuns (clones anyway). I did finally learn I had to build a bigger coil for them - I'd been getting so many dry hits, I'd put them down for a couple of months before I tried breaking back out.
The only maddening thing is getting that tank all loaded up, then *HACK* - dry hit. Gotta drain the tank, futz with the wick and the coil (or replace the wick if it got burnt), reload.... I guess that's my Mr. Miyagi "Wax On/Wax Off" training....
Hope y'all have a great day
Yes, I believe it was. They have 8 (or more) store fronts (that I can remember), including at least 3 in Ohio.
Don't know what's going to happen, come July 1. I walked in a few months ago, and they pulled out their order pad. I just shook my head and told 'em I'd started DIYing, but I did want to get a bit of kanthal....
Isn't that the truth. Plus look how much time, effort, and money we save by not using vg. My car windows stay pretty clean.Too bad they don't make windex for lungs, huh...
Andria
- Status
Similar threads
- Locked
