I wanted to get some spare parts kits but they're out of stock so I ordered 5 more KFv4's. 
That makes 12 KFv4's. 
That makes 12 KFv4's. Attack of the (Kayfun v4) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
I wanted to get some spare parts kits but they're out of stock so I ordered 5 more KFv4's.
Me too .. for spare parts that is .. have 5 in my daily rotation .. so got 3 more mainly for spares.
This a pretty simple recipe for diy juice. I get most of my supplies from here,Freedom Smoke USA. Make a shopping list and go from there. Recipe progy,eJuice Me Up - Best eJuice Calculator.
Last edited:
I use mostly TFA flavors. There's a great thread in the DIY section with lots of recipes and a Dropbox list you can download. However there aren't many tobacco recipes. You can also search recipes at ....................
Anyone see these yet? Looks interesting. Might try them. $6.68 Kayfun Mini Styled RTA Rebuildable Tank Atomizer - 3ml / stainless steel + glass at FastTech - Worldwide Free Shipping
I wanted to get some spare parts kits but they're out of stock so I ordered 5 more KFv4's.
DAMN! I want more! I only managed to order two! maxed-out my already maxed-out card! haha... I want to figure-out a way to order 2 more, but, there's just no way... I guess 2 will have-to do!
NOW, idk for sure, but I MAY have ordered a 3.1... I can't remember if I left it in my cart or not. How do ya'll like the 3.1 VS. the Kayfun V4's? Is there anything you seriously HATE about either?
@SLvapor Is that package from VB? & if-so, did they send u the banz 4 free, or did you order those baby blue bandz to ur cart? I hope they send em free for promotion, cuz I could seriously use a couple more bandz 2 protect my tanks. I only have 3 atm, and 1 of them is on a mod, hiding a scratch... I dont have nearly enough for my tanks (the tanks I've got in the mail, and the 1-2 i have now) Would-be really nice if they send ya some to promote their site!
Just restating for newbies: If you guys haven't get an old cox cable, or pick a 3ft one for $3 at Wally, strip and make a copper spring. Eliminates that pesky jumpy resistance and is an easy mod if you know how to make a coil... same concept just a lower gauge.
I can only speak for the v4. Common problems and fixes: leaky at bottom: dental floss behind #13 or replace o ring, lots of parts: it's common sense after putting it back together once and truthfully never have to fully disassemble unless tank swap or 1st clean, jumpy resistance: cheap copper spring mod, dry hits: I posted how I build before in this thread, lots of how to and youtube. I love the v4 have a velocity, orchids, silverplay, magma, etc etc but I'm not buying anymore. It is all about what your like personally but a v4 with a subohm kit is the perfect airflow and is very satisfying (and so cheap since I vape nonflavored 6-12%)... doesn't leak after addressing common problems, decent tank size, sturdy, doesn't take 1000 watts=good battery life, cheap as heck now, win
Damn. Not sure what those taste like, but I usually only vape tobacco too, RY4 to be exact.. A nice Caramel/Vanilla tobacco juice is always in my cart when ordering juice online, at-least in sample size... If I were you, I would give BWB BY4 a shot, you'd probably really enjoy it. (BWB has the BEST tobaccos)
& daaamnnn youuuu aaallll!!! I want 12 KF4's! Hell, I'd take 12 KF1's
(was there a 1? idek... lmao) I ordered 2 KF4s from the sale site, but, I kinda-wish I could have affordered 2 more. Or... yknow.. 20-more... cuz... I NEED RBA Tanks for my vapocalypes chest!!! ANYONE ORDER AN AQUA OR TWO?? I did. My mom did, for me, to be exact. She's so kind. (widow on fixed income, so, it was a lot for her, too) I'm hoping to receive them this week, and, I'm hoping to really enjoy them! this is my 1st foray into RBT's... Other than my subtank mini that i just got for Xmas from her.... I rebuilt that, &, LOVE-it!!! Hoping I'm going to enjoy these tanks. LOVED the prices!!!! Seriously... LOVED em! (FINALLY! tanks I cud afford!) lol. I've got a feeling I'll fall in love & wish I had 10 more, of course...
I can only speak for the v4. Common problems and fixes: leaky at bottom: dental floss behind #13 or replace o ring, lots of parts: it's common sense after putting it back together once and truthfully never have to fully disassemble unless tank swap or 1st clean, jumpy resistance: cheap copper spring mod, dry hits: I posted how I build before in this thread, lots of how to and youtube. I love the v4 have a velocity, orchids, silverplay, magma, etc etc but I'm not buying anymore. It is all about what your like personally but a v4 with a subohm kit is the perfect airflow and is very satisfying (and so cheap since I vape nonflavored 6-12%)... doesn't leak after addressing common problems, decent tank size, sturdy, doesn't take 1000 watts=good battery life, cheap as heck now, win
Are you telling me that I need to buy a "subohm kit" if i want to use a coil under 1 ohm? please, don't tell me that... I can't... I can't even... lol. Whatever... I like 1ohm + builds anyways..
Are you telling me that I need to buy a "subohm kit" if i want to use a coil under 1 ohm? please, don't tell me that... I can't... I can't even... lol. Whatever... I like 1ohm + builds anyways..
The subohm kit had a bored airflow hole for a "looser" draw. It also comes with a peek insulator which makes it safer for warmer situations (lower ohms, high wattage). I vape .7 to 1 ohm on it so I really don't need the peek but it's a fail safe and I like the draw with it.
Most here have all had great luck with the Tobecos, I have 10 now, and not one of them has had any issues with leaks, or bad o-rings 4S kit is not mandatory to take the resistance lower. I've run mine down to .6 with no issues with the standard insulator. Main advantage is additional airflow, but at the cost of adjustability.
If I remember correctly you like tighter airflow so you should be fine with how they arrive I've also not had any issues with the springs in straight power mode.
I'm in the more airflow camp so I do prefer the extra offered by the 4S kit, and as mentioned the addition of PEEK insulator does not hurt.
If running thicker liquids a 3mm coil works best for me, If I go smaller I can notice a loss of saturation, but that will be dependent on how you like to run things.
This thread has plenty of good info on building.
The KF4s I received from Vaporbank were all really tight I had to tape the base and use a tool in the airflow to get them apart for the first time
If I remember correctly you like tighter airflow so you should be fine with how they arrive I've also not had any issues with the springs in straight power mode.
I'm in the more airflow camp so I do prefer the extra offered by the 4S kit, and as mentioned the addition of PEEK insulator does not hurt.
If running thicker liquids a 3mm coil works best for me, If I go smaller I can notice a loss of saturation, but that will be dependent on how you like to run things.
This thread has plenty of good info on building.
The KF4s I received from Vaporbank were all really tight I had to tape the base and use a tool in the airflow to get them apart for the first time
I can only speak for the v4. Common problems and fixes: leaky at bottom: dental floss behind #13 or replace o ring, lots of parts: it's common sense after putting it back together once and truthfully never have to fully disassemble unless tank swap or 1st clean, jumpy resistance: cheap copper spring mod, dry hits: I posted how I build before in this thread, lots of how to and youtube. I love the v4 have a velocity, orchids, silverplay, magma, etc etc but I'm not buying anymore. It is all about what your like personally but a v4 with a subohm kit is the perfect airflow and is very satisfying (and so cheap since I vape nonflavored 6-12%)... doesn't leak after addressing common problems, decent tank size, sturdy, doesn't take 1000 watts=good battery life, cheap as heck now, win
#13 is the air adjustment screw on my parts diagram ... huh?
I discard the airflow screw, and use a 3mm coil with rayon, very happy. The earlier clones with the #16 o ring problem, solved with the larger o ring. I find that they are to fat for the Tobeco v4, they bind, the standard works fine. Just saying.
Last edited:
- Status
