On my original I had to wrap a thin strip of duct tape around # 3 a few times and hold it with pliers to crack #9 loose, I swore it wasn't going to budge but it did, I mean to tell you it was tight.
Attack of the (Kayfun v4) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
Looks like my 5 pack of clear glass sections, 2 blue glass sections, and 2 black glass sections shipped from FT today. February 3 indeed! 
Is it #9 you can't get out or is 10 & 11 in the way of getting to it?
It is #2 I am trying to get out. From watching the video that is necessary to get out #10 and #11. #9 Unscrews. But someone else said taking out #2 is not needed to get #10 and #11 out. I can't get any of them to budge.
#2 can stay, take out #1 and you can push out 10 & 11 from the 510 side and get to #9
Also what brand? As EHPro seems to not come apart very easy from what I read here.
Last edited:
Yeah that was the second way I tried after not being able to get #2 out. Would not come out. And yes it is an EHPro. Oh well not gonna mess it up. Was just hoping to get a better cleaning to get rid of a bit of residual machine oil taste. Seems to be fading after the second cleaning and using a stronger juice.
Anybody try one of these on a SMPL mod? I'm not having any luck getting it to fire.
Sent from my Nexus 6 using Tapatalk
Sent from my Nexus 6 using Tapatalk
Uh oh. Coincidentally I just ordered a SMPL clone yesterday to use with the Kayfun (although I might put my Vertex on it if I like it more).
Hand to lightly sand/file the bottom of my 510 connector to work in my Praxis (same kinda hybrid top connection as an SMPL but a nasty switch)
Has anyone else broken their atty down to clean it between tanks and forgotten to put the spring back in? I'm 3 for 3 so far
Sent from my SGH-M919 using Tapatalk
Haven't yet, but it's only a matter of time I'm sure!
Bits scrambled by Tapatalk...
Been running my Tobeco for two days now and am really loving it. For the price, this thing is of amazing quality. Vapor is good and the juice control and ability to fill so easily is making me like the design more and more every day.
My only gripe is that I seem to be going through a lot of juice! But that may be due to how much I like this device...
Bits scrambled by Tapatalk...
My only gripe is that I seem to be going through a lot of juice! But that may be due to how much I like this device...
Bits scrambled by Tapatalk...
back in the KFL days 
I bought a couple 22mm clear tanks from ultravaping for 8 bone each... Kayfun Nano Hybrid Tank
the other day I found out the K4 plastic tank is the same the k4 tank is about half a mil longer. however, I successfully swapped the 2 types around on both the KFL and K4. they work fine. so, if anyone wanted to put their plastic tank off their K4 on the KFL it's a go... plus we know where to get more of them cheap I was excited because I still use all 6 of my *moded* KFL's in various configs.
I bought a couple 22mm clear tanks from ultravaping for 8 bone each... Kayfun Nano Hybrid Tankthe other day I found out the K4 plastic tank is the same
the k4 tank is about half a mil longer. however, I successfully swapped the 2 types around on both the KFL and K4. they work fine. so, if anyone wanted to put their plastic tank off their K4 on the KFL it's a go... plus we know where to get more of them cheap I was excited because I still use all 6 of my *moded* KFL's in various configs.
Usually jc won't open all the way because your 510 screw and afc screw are screwed inn or backed out too far... Unscrewing the 510 screw a Lillie will fix it
Sent from my iPhone using Tapatalk
Can't see how that would have been an issue. Before I broke it down to clean again it moved fine. The only thing I can think is the hot water caused the o-rings to swell.
My Kayfun V4 (FT 2018000) has quickly become my favourite Tank. It is head and shoulders above all my tanks IMO. A few weeks in now no leaks no problems of any kind The only cons I guess is the tank is kinda small & juice consumption is kinda high. I DIY so the juice is No Problem for me, mite be a deal breaker for some I guess. I have 2 more in the mail a FT2018000 and a Tobeco hope there as good as the one I have For anyone considering a Kayfun V4 it's Great IMO
The new Taifun is in second the afc and the glass tank are big improvements over the older version. With the AFC wide open it has a perfect draw IMO
The only cons I guess is the tank is kinda small & juice consumption is kinda high. I DIY so the juice is No Problem for me, mite be a deal breaker for some I guess. I have 2 more in the mail a FT2018000 and a Tobeco hope there as good as the one I have For anyone considering a Kayfun V4 it's Great IMO The new Taifun is in second the afc and the glass tank are big improvements over the older version. With the AFC wide open it has a perfect draw IMO
I've been happier with my black Tobeco than my FT "A" (2018000). I've had to do nothing to the Tobeco and it just worked right out of the box. I had to change the o-ring (16) on the FT but that's the only reason I'm happier with the Tobeco. Both have been working flawlessly. I have another Tobeco (silver) and one from FC coming. The silver Tobeco was shipped from CA but it's been sitting somewhere in Anaheim since the 18th 
. No tracking on the FC but it's been 2 weeks yesterday
. No tracking on the FC but it's been 2 weeks yesterday 
My Kayfun V4 (FT 2018000) has quickly become my favourite Tank. It is head and shoulders above all my tanks IMO. A few weeks in now no leaks no problems of any kind
The new Taifun is in second the afc and the glass tank are big improvements over the older version. With the AFC wide open it has a perfect draw IMO
How much juice can you squeeze in yours? I get almost 4ml from empty.
Take a look at kayfunmods.com you might want to try using the air adjustment screw as shown in lieu of the spring.
Has anyone else broken their atty down to clean it between tanks and forgotten to put the spring back in? I'm 3 for 3 so far
Sent from my SGH-M919 using Tapatalk
Take a look at kayfunmods.com you might want to try using the air adjustment screw as shown in lieu of the spring.
Ya about 4 mils But it don't last long another note the wicks on my old Kayfuns I would change out every tank, for the crisp taste, with the V4 I can go 5 or 6 tanks on a wick. Amazing Atty
another note the wicks on my old Kayfuns I would change out every tank, for the crisp taste, with the V4 I can go 5 or 6 tanks on a wick. Amazing Atty - Status
