Attack of the (Kayfun v4) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
You are now doing it correctly.
I think to myself to fill:
start: "unscrew JC in the direction like I was taking it off the mod, then top the same way (counterclockwise)"
finish: "screw top in the direction like I was putting it back on the mod, then JC the same way (clockwise)"
Now you need to clean up the flooded juice in chamber that holds the spring, section A to get it to quit leaking.
Last edited:
Well guys, ive been happily using my Hcigar version for the past few days with Zero issues at all, no leaking, no dry hits, no sticking JC its near perfect in the way it works, obviously i dont have an original to directly compare but just today i took delivery of a set of the original PTFE rings from svoemesto, these are soft and bendy compared to the clones, they are a tighter fit and furthermore these original rings fit 100% in MY Hcigar, the JC is perfect, tightens up and doesnt bind and is alot smoother, i cant confirm this is for all hcigars but mine they fit.
Also while i was at it, i stuck all the original kayfun4 orings, deck screws onto it with no issue, also stuck in the new uprated Gold Plated spring from svoemesto has made it stable as a rock with the Ohms, open or closed or even half way.
I still want to confirm this with someone, if you remove the build deck section completely, leaving the 510 and JC ring attached and screwed together, can you grab the ring and move it side to side slightly <--> <--> <-->, not up and down, but sideways, its like a nats whisker and once the build deck is in it never does it.
Overall its taken 2 Kayfun 4 Clones, one at £20 the other £34, plus assorted Original Svoemesto parts £15, still only comes out to £69 which is half the price of a real one and it bloody works (now it does lol) Oh and the Hcigar version has the added bonus of being logoless, which in my eyes is a big plus.
Also while i was at it, i stuck all the original kayfun4 orings, deck screws onto it with no issue, also stuck in the new uprated Gold Plated spring from svoemesto has made it stable as a rock with the Ohms, open or closed or even half way.
I still want to confirm this with someone, if you remove the build deck section completely, leaving the 510 and JC ring attached and screwed together, can you grab the ring and move it side to side slightly <--> <--> <-->, not up and down, but sideways, its like a nats whisker and once the build deck is in it never does it.
Overall its taken 2 Kayfun 4 Clones, one at £20 the other £34, plus assorted Original Svoemesto parts £15, still only comes out to £69 which is half the price of a real one and it bloody works (now it does lol) Oh and the Hcigar version has the added bonus of being logoless, which in my eyes is a big plus.
Last edited:
If you haven't found any try here Buna-N 70 : O-Rings - The O-Ring Store, We make getting O-Rings easy! they have 11.5mm and 12mm. There is also different thicknesses. 1.6mm etc.
Yup.
All 3 of my tobecos do this. Like u say, a nats whisker. Not as large as a fly's eyelash though.
I got mine from oringsandmore.com. I ordered 10 x 1.5mm, 11 x 1.5mm, 12 x 1.5mm, 12.1 x 1.6mm. 12.1 x 1.6mm is way too big and won't fit. I've been using 12 x 1.5mm and they're perfect for my FT, FC and 2 Tobeco clones. I also added 17 x 1mm (tanks) and 5 x 1.5mm (drip tips). Shipping is very reasonable ($3) and you get them within a week.
So my FT V4 Black infinite Clone showed up today
It was nice and clean and I have to mention the threading again really nice and smooth
All 3 of my other one's are performing great so far no leaks no problems
Thank YOU
I will order mine when the Chinese new year dust settles!
Since you are able to do a comparison between the two, how about taking a look at the various juice feed holes and such and see if you might see what the differences are that caused the dry hits? I assume that your used the same ratio PG/VG in both.
About time (I guess) for a dry burn on this one.
Certainly nothing perfect about this except how well it works, I hope some find it of some use.
Certainly nothing perfect about this except how well it works, I hope some find it of some use.
Yep, if it isn't broken don't fix it. When I get one that's producing I don't care what it looks like it's not coming out of the tank.
Strangely, haven't had 1 coil that didn't perform. Even the ugly ones, said man, that needs recoiling ..... Wicked it up & it flew. Had bad wicking jobs, too little/short/too long/too much .... But coils seem to be a breeze on these v4s.
That said, you know my next coil will be a total flop
Had a little incident today , clone arrived last week the base part juice cut-off area has been loose since arrival.
However awesome vape I'm a noob its the first KayFun for me but woah just awesome ..
Can't wait until the kit arrives to give her more draw...
Anyway I had the entire unit come completely off the juice control section earlier today.
I figured great this is an opportunity to tighten all that stuff up ..
well the schematic as described in the authentic thread is misleading and I re-assembled her with the derlin protected screw upside down and started freaking out since she was at a constant .02 ohm with No coil.. lol
So after reading and reading for the solution here in the authentic section ( thanks guys ) shes running like a racehorse now and is all solidified up working like an original authentic precision work of art...
Man I love this RTA....
However awesome vape I'm a noob its the first KayFun for me but woah just awesome ..
Can't wait until the kit arrives to give her more draw...
Anyway I had the entire unit come completely off the juice control section earlier today.
I figured great this is an opportunity to tighten all that stuff up ..
well the schematic as described in the authentic thread is misleading and I re-assembled her with the derlin protected screw upside down and started freaking out since she was at a constant .02 ohm with No coil.. lol
So after reading and reading for the solution here in the authentic section ( thanks guys ) shes running like a racehorse now and is all solidified up working like an original authentic precision work of art...
Man I love this RTA....
Lol I have blue and wanted to scratch it to gauge the turns of the juice control Nope she wouldnt scratch
Too awesome !
I take it back the threading is very very nice !!!!
My blue ( apparently Blue is HCigar I dunno for sure ebay said something different) has NO issues when laying the unit sideways
if the juice control is set to turn off the juice flow -- just sayin
- Status
