Authentic Svoemesto Kayfun 5
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
It sounds as if you are using a juice that is cut with some water. Water has to come from somewhere if it's condensing so if that's the case sure, you will definitely get condensed water vapor. I doubt it would be water from the humidity in the air because it would not condense on surfaces that were at least as warm as the air unless the local humidity is 100%.
Duane
WooHoo!16
And I placed my first juice order: Cinn City, Waffles and Gooey Butter Cake. Woo hoo!
Our friend (who we haven't seen in awhile), Pingy, likes Gooey Butter Cake. I can see what you ordered by going to the "Customers Who Bought This Product Also Bought..." section of the K5. Live websites are fun.
I don't know Duane. I'm not a condensationologist but it is dang humid here. As for cutting juice with water, I do not know except that I see water in some DIY recipes. Also, I know many people have the same experience and I know they aren't vaping the same juice I am.
What I do know is when I get juice on my hands it leaves a residue that stays until I wash my hands. This "condensation" I speak of can be wiped off with my finger and it leaves no residue. This is how I conclude that it is water. BTW, I have only experienced this on my KFLs when using a beauty ring on a Provari 2. There are no gaps with this set up (or at last little gaps). I've heard others describe the same thing on other attys.
OK I understand. Any atty will obey the laws of physics. That wouldn't be considered a defect would it? I guess I'm not sure what the discussion is about.
Duane
OK, most (if not all) accounts of the KM3 and the K5 suggest that the flavor from these two atties is noticeably improved from the Kayfun Lites. I haven't yet received my K5 so I can speak only of the KM3 (but have heard the K5 is the same vape as the KM3) and can confirm the flavor I get from the KM3 is, in fact, better than the Kayfun Lite. So this begs the question...why?
Anyone want to take a stab? I'd be curious if we can come up with a likely answer.
Anyone want to take a stab? I'd be curious if we can come up with a likely answer.
Placebo effect?
I'm letting my KF5 sit, unbuilt, until I can get me a Radius.
My P3 in 18350 mode, will always be in 18350 mode, and therefore, I won't push much wattage through it.
At 10 watts/1.0 ohm, the airflow overpowered my coil, and flavor was muted, vapor was thin.
I figure, I'll learn me a new build, and run tests on a Radius, between 15-25 watts, to see where I relocate my sweet spot!
I'm willing to believe the KF5 has better flavor than a KFL, but I don't have the proper equipment to confirm that.
Once the SM air restriction option is available, and if it's available before I save enough for a Radius, I can use my KF5 on my P3 at 10 watts/1.0 ohm coil sweet spot.
I had to back off on the juice flow too, compared to the Mini, which I like at 2 full turns... I can get away with 1-1.5 turns on the KF5. Using 30/70 or 20/80 juice.
When I started vaping with my first KM3 I noticed no flavor difference between it and the Achilles drippers I had been using exclusively for the 8 months prior. Then after a couple months I fired up a KFL and noticed immediately there was a dropoff in flavor. Not a massive dropoff, but noticable to be sure. Until the KM3, I whole heartedly subscribed to the belief that drippers were always a notch better as it related to flavor. The KM3 has blurred that difference.Newer = better?
I had Serendipity in my KF4 which I was REALLY enjoying. When I got the KF5 I first tried TT Max VG, which wasn't really wicking great in the KF4, 50/50 worked much better but didn't taste as good IMO. I was blown away by the flavor! So I decided to try Serendipity next, been vaping that ever since in the KF5. That same day I went back to my KF4 (with Serendipity) to compare flavor and, what I used to think was so good, no longer tasted the same. I was really shocked! The KF5 has ruined my KF4!
I'd like to do a proper Mini Vs KF5 comparison using the same juice one day, but haven't had time lately.
Unfortunately, you could fill the air inlet with juice, and it does not have a physical path to get to the 510 of the atty.
Sent from my iPhone using Tapatalk
I ordered some stuff this morning - a K5 and 3 bottles of juice (my first order of HHV juice
). Is it possible to add glass and a couple of insulator kits to my order? Thanks so much!
I ordered some stuff this morning - a K5 and 3 bottles of juice (my first order of HHV juice
Be sure to send an email with your order number to support@heathersheavenlyvapes.com. You might need to place a second order, and ask them to combine the two if they can.
I couldn't get my K5 to connect to my Radius. Same with my wife's. And the 510 pin isn't adjustable. If you move it out at all, it feels loose.
The bottom 510 pin simply holds the bottom plate on and obviously makes the positive connection.
Shortest 510 pin of any Atty I own. Having minor ohm fluctuations when on my VS DNA200. Opened the VS up, no obvious way to adjust its 510 pin higher. No such problem on Pico or VTC Mini, those female 510's are more shallow in depth. I also have to SUPER TIGHTEN the Kayfun's 510 pin, or the ohm drift is even higher. If you don't use TC mode, may not be an issue, so far it is for me.
- Status
