What was for dinner?Yep, I neither have the O-ring (between the extender) nor the plastic AFC screw. And I never had an/y leakage from this atty, from anywhere.
And with another, this nKFL is my daily beater. Two atties being non-stop used. 28AWG kanthal, 2.4mm ID, 1.2~1.4Ω, CelluCotton Rayon and firing between 16~18W.
Btw, recently have also put an el-cheapo squonker into the mix
View attachment 828151
- Status
Yep, I neither have the O-ring (between the extender) nor the plastic AFC screw. And I never had an/y leakage from this atty, from anywhere.
And with another, this nKFL is my daily beater. Two atties being non-stop used. 28AWG kanthal, 2.4mm ID, 1.2~1.4Ω, CelluCotton Rayon and firing between 16~18W.
Btw, recently have also put an el-cheapo squonker into the mix
View attachment 828151
May be an El-Cheapo squonker, but you sure didn’t cheap out on the atomizer!
Nice Mark Bugs up there!
Try the Atmizoo Creek!!!
Many thanks Q!Yep, I neither have the O-ring (between the extender) nor the plastic AFC screw. And I never had an/y leakage from this atty, from anywhere.
And with another, this nKFL is my daily beater. Two atties being non-stop used. 28AWG kanthal, 2.4mm ID, 1.2~1.4Ω, CelluCotton Rayon and firing between 16~18W.
Btw, recently have also put an el-cheapo squonker into the mix
View attachment 828151
Installed the extended dome cap w/out the oring and so far no leaks, seeps or drips. Thanks for the help.
Last edited:
The Creek is shown in the video sir
[emoji2359][emoji2359][emoji2359]
I should have watched it!
Will do on my lunch break!
Hows it goin guys? About a month ago I received my kayfun Lite 2019 from OV after being on the waiting list a couple months. After I got it I wasn't happy with how tight the draw was. Ever since then Ive been doing a lot of research on restrictive lung rta's which are more airy and fit my type of draw for mtl. I then decided to buy the Damn Vape Fresia which I received yesterday. Im really loving the draw and flavor on it. I love it so much that Im now deciding the sell my kayfun Lite.
If anyone is interested in buying a pretty much brand new 22mm Lite please let me know. I haven't even used it for the past couple weeks. It doesn't have a scratch on it and I have all the paperwork for it and I also have the clear bell cap and drip tip. Thanks guys
If anyone is interested in buying a pretty much brand new 22mm Lite please let me know. I haven't even used it for the past couple weeks. It doesn't have a scratch on it and I have all the paperwork for it and I also have the clear bell cap and drip tip. Thanks guys
Curious as to how folks who own a Dvarw compare it to the new Kayfun Lite?
Personally, I like both. The Kayfun screams quality though, looks amazing and feels amazing against the very light steel work of the Dvarw.
Flavour very close on both, too.
But the big winner for the Kayfun is the ease of build. Thread off the tank and straight to the coil and cotton.
Personally, I like both. The Kayfun screams quality though, looks amazing and feels amazing against the very light steel work of the Dvarw.
Flavour very close on both, too.
But the big winner for the Kayfun is the ease of build. Thread off the tank and straight to the coil and cotton.
I agree with you about the way the KF feels in terms of quality and the flavor being being too close to pick one over the other. For me the Dvawr is a bit easier to build but that could be because I've been building on the Dvarw for quite a bit longer than the KF and I am more used to it. Another plus for the KF IMO is the fact that it is relatively easy to find and purchase.
I can’t answer your question.
I originally used my Dvarw MTL tanks with no airflow insert, for a restricted DL vape...which works great by the way!
0.5~ ohm, two wire twisted 28g Kanthal, 2.4mm coil diameter, 80vg/20pg juice, 25 watts on a Provape Radius...just bliss.
However, I purchased the 0.8mm airflow inserts, and started using them for MTL Salt Nic builds.
And I fell in love all over again! Before the first wave of love had even worn off!
(And by the way, the glass tank kit that KHW makes for the Dvarw is 100% worth the buy!)
Then comes the nKFL...which I used as a Salt Nic device from the start.
With addition of the new MTL center pin, I am in pure MTL heaven...on both tanks.
I cannot compare the two.
I reach for each one equally.
I can’t even build either for specific juices!
Not sure if any of y’all do that, but over the last 8 years I’ve developed a sixth sense for knowing which atomizer in my collection will work best for different flavors.
The nKFL and Dvarw MTL are both kings in my book.
Sure they are built differently, and building on them is different...but neither is the winner...because they both are!
Oh also, note to all...
Tonight, I ditched the Ultem dome cap set up...in favor of another Steam Tuners top fill kit.
The thought of partially disassembling the tank, to fill up, just didn’t jive with my turkey.
Currently vaping some Nic Salt juice...as with all my nKFLs.
INFZN brand // Tobacco Custard // 36mg
Very tasty. Good balance of tobacco and custard.
Good throat hit. Good vapor production.
Bought from:
https://www.electrictobacconist.com/infzn-tobacco-custard-30ml-nic-salt-juice-p5637
Great vendor. Awesome prices. Fast shipping!
Your mileage may vary!
Tonight, I ditched the Ultem dome cap set up...in favor of another Steam Tuners top fill kit.
The thought of partially disassembling the tank, to fill up, just didn’t jive with my turkey.
Currently vaping some Nic Salt juice...as with all my nKFLs.
INFZN brand // Tobacco Custard // 36mg
Very tasty. Good balance of tobacco and custard.
Good throat hit. Good vapor production.
Bought from:
https://www.electrictobacconist.com/infzn-tobacco-custard-30ml-nic-salt-juice-p5637
Great vendor. Awesome prices. Fast shipping!
Your mileage may vary!
Well put HB.
I bought the new XS centre pin for the Lite. And it certainly makes the draw tighter. Oh boy it’s tight. Maybe a little too tight for me but we’ll see how it goes.
I've been really enjoying mine with the pin but I prefer a tighter draw. I read somewhere that adjusting the coil height can help.
At this point I have to give the edge to the dvarw in terms of favorites. I love the vape I get from the kfl no question, love the look, and classic kf construction quality, but that plastic afc screw is a design fail. My dvarws have provided me leak free vaping goodness for over a year now. I have every airflow and tank style extra I could ever need for them as well. Which makes them more versatile than my kf, but that isn't as important as the vape experience itself. After trying three different grub screws from my spares and seeing no leaks through the air intake I'm still getting a slow seepage of liquid out of the 510. SM needs to address this I feel as it seems to be a common issue. Until then I'll be sealing up the 510 of my kayfuns myself.
Unrelated, sorry
I like em both and are too close to favor either one. There's no doubt about the juice thing in certain tanks, as I have a tank that does best with one of my coffee juices and down the line. I vape about 7 different juices in 8 or so different rtas and each shine the best with a certain flavor..I do have to say my fav juice is dragons fire and it tastes best for me in the nkfl.
Sent from my SM-G960U using Tapatalk
I usually have the same tastes as qorax when it comes to rtas, not only in performance, but also in looks, but that Aladdin rta is , well not my favorite looking tank. Perhaps it's the bubble tank, which I never really cared for....I'm sure it's a fine tank and vapes well, but totally opposite of something like the nkfl which is a great looking tank imo
Sent from my SM-G960U using Tapatalk
Sent from my SM-G960U using Tapatalk
I finally got one of the 22 mm tanks tonight. I have not really set it up yet, but I did put all the little screws in and put the extension kit on, so I could compare it to a Prime. I am really going to like this, it will be used on a Dicodes Dani Box Mini, talk about a compact setup, wow!
KAS
KAS
- Status
Similar threads
