Authentic Svoemesto Kayfun Mini V3

Status
Not open for further replies.

Chakris

Resting In Peace
ECF Veteran
Aug 22, 2012
10,637
44,917
Bangkok, Thailand
Did you try stretching the spring Ret? Lay something across the flat to keep the spring from pulling out of the threads and then yank it up with a needle nose or something.

Nope , I hadn't thought of that . I'll give it a shot and see if it helps . I thought about putting a little Noalox on the spring and contacts but I'm not sure if that's a good idea with the Provari . Thanks Bronze !

I smear some no-ox on the threads. I wouldn't put it on contacts or springs though.

Yup , will do . Now if I can only stop pressing the endcap to fire it . If it's tube shaped muscle memory says it's a Stingray . :)

I know that feeling both from fishing and working offshore , I can't remember the reason for it but it's a weird sensation .
I agree with Bronze, no-lox on the threads but not on the contacts.

Being in the Navy is the same thing, whether going from shore duty to ship or ship duty to shore it always takes some time to get your sea legs/land legs working proper. ;)
 

1atom12

Unregistered Supplier
ECF Veteran
Good news and bad...

The good news is we have been approved as an official retailer for Svoemesto! The bad news is the Mini V3s are still in production and they have none to sell us. As soon as they are available, we will be making an order with them. No idea when they will have the next batch ready.

Adam
 

StealthyTX

Hates brass
ECF Veteran
Verified Member
Feb 13, 2012
1,094
5,849
Austin, TX
Good news and bad...

The good news is we have been approved as an official retailer for Svoemesto! The bad news is the Mini V3s are still in production and they have none to sell us. As soon as they are available, we will be making an order with them. No idea when they will have the next batch ready.

Adam

I still want to be first!!!
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
Good news and bad...

The good news is we have been approved as an official retailer for Svoemesto! The bad news is the Mini V3s are still in production and they have none to sell us. As soon as they are available, we will be making an order with them. No idea when they will have the next batch ready.

Adam
WOOHOO!!!!!!!!! Congratulations! My favorite juice vendor is an authentic Svoemesto dealer. Never dreamt it!

Adam, are you thinking of stocking older models like the Kayfun Lite and K4? Everyone is out of stock on the V3's.
 

xstitch

Ultra Member
ECF Veteran
Verified Member
Mar 13, 2013
2,575
9,338
Maine
WOOHOO!!!!!!!!! Congratulations! My favorite juice vendor is an authentic Svoemesto dealer. Never dreamt it!

Adam, are you thinking of stocking older models like the Kayfun Lite and K4? Everyone is out of stock on the V3's.
Pretty sure VapeRev has KFL+'s, at least they did a few days ago
 

xstitch

Ultra Member
ECF Veteran
Verified Member
Mar 13, 2013
2,575
9,338
Maine
Good news and bad...

The good news is we have been approved as an official retailer for Svoemesto! The bad news is the Mini V3s are still in production and they have none to sell us. As soon as they are available, we will be making an order with them. No idea when they will have the next batch ready.

Adam
Can we preorder???? Lololol [emoji23][emoji16]
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
No, not the mini. The older KFL+
Oh. Funny, VapeRev was big time when they were the only US retailer of Kayfun products. They always sold them for about 10% more than the overseas retailers (inTaste and Cloud9) and I'm guessing they didn't make much $$ on them even at the higher price point. Not sure. But it sure got them a hell of a lot of attention. I don't think Vape Rev ever offered the KM3. VapeRev doesn't have their own line of e-liquid either but HHV does so if nothing else it gives them some traffic online.
 

xstitch

Ultra Member
ECF Veteran
Verified Member
Mar 13, 2013
2,575
9,338
Maine
Oh. Funny, VapeRev was big time when they were the only US retailer of Kayfun products. They always sold them for about 10% more than the overseas retailers (inTaste and Cloud9) and I'm guessing they didn't make much $$ on them even at the higher price point. Not sure. But it sure got them a hell of a lot of attention. I don't think Vape Rev ever offered the KM3. VapeRev doesn't have their own line of e-liquid either but HHV does so if nothing else it gives them some traffic online.
I ordered most of mine from them because I didn't want to go overseas. And one time there weren't any in stock, I emailed and asked if they had any, they emailed back promptly to tell me they updated the page. I appreciated the customer service, even though I thought their shipping was steep.
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
187,949
I ordered most of mine from them because I didn't want to go overseas. And one time there weren't any in stock, I emailed and asked if they had any, they emailed back promptly to tell me they updated the page. I appreciated the customer service, even though I thought their shipping was steep.
Back when the KFL's and K4's were released I'd say 25% of the ECF people were ordering from VapeRev simply because they were a US dealer and some Americans did not want to go overseas (for varying reasons I suspect). They knew it cost a little more but I think they felt a higher level of comfort purchasing in the US. Of course, Vape Rev was the only US dealer in those days. The remaining 75% were buying from C9 and inTaste (overseas) because they were a little cheaper. Though, inTaste was faster than all three when it came to getting it to your doorstep. They'd ship within hours via FedEx who would have it at your door in two days. inTaste charged $15 for shipping.
 
Status
Not open for further replies.

Users who are viewing this thread