Authentic Svoemesto Kayfun Prime
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
This tank also increases the Primes capacity too...
I wouldn't know because I live in Florida, but when I gets really cold there, do you notice the wicking is different? Like the juice gets thicker?
Sent from my SCH-I545 using Tapatalk
Thanks fellas!
Turf, I think the one you and I both posted is a newer version of the one I remember, and is a 26500 version.
It looked a lot like that device, but the one I’m remembering was slimmer.
I’ve been searching ECF Participated threads section to find the pic...nothing yet.
The wood table/panel wall in the background is a certainty.
Can't say I noticed any difference in wicking. We are quite a cold country anyway. -1 degree today so not overly cold even for here! We had -15 about 8 years ago; that's the coldest I've ever seen. But I wasn't vaping at that time. We usually only get up to about 20 degrees on a hot summer's day. You don't know how lucky you are to live in sunny Florida!! Somewhere I have always wanted to go! Maybe some day!
Florida has nice weather, but in the summer it's brutally hot and just soo flat here.I recently seen a documentary on Ireland, where a guy takes a big row boat and went to all those islands off your coast and pitches a tent for a couple nights at each place...it was so beautiful and I would love to do that. .
Sent from my SCH-I545 using Tapatalk
It is a lovely place. Lots of people dislike the country, especially younger people who can't wait to grow up and get away. People always talk about other countries and their beauty, but yes we do have lots of very beautiful parts here. But the summer weather can be very average. We usually have our best weather in April, May and June. I'd love to experience a hot summer's day in Florida though. I'd probably be too hot after 10 minutes in that heat though!
Just checked tracking and it's not going to be here till next week......
Sent from my SCH-I545 using Tapatalk
Got my PEI tank today, and installed it. I'll throw up some pictures when I get a chance.
Don't throw up on our account.
So I just got the steam tuners wave tank for prime...I'm loving the looks ....there are 3 options on the drip tips. One you can use the prime top nut, which allows you to use any 510 drip tips, with this option , depending on the height of your tip, it's not that much shorter then the standard prime.. you can also buy special drip tips that screw directly into the wave tank itself without the need for the prime nut. The 2 most available special tips are k31 & k32 which are 10mm in height by 10mm wide and have a bore of 5mm. With these tips, both in SS, the wave tank is the shortest it's going to be and has a total height , with drip tip, of 50mm. The 3rd option is the k41 drip tips, these also thread directly into the wave tank and are 12mm in height by 10mm width with a bore of 4mm. The k42 tips are available in SS, clear, and white. I have seen the wave tank being sold with & without the prime nut and if not, you either have to buy the prime nut separately or purchase the special DT's. The tank itself costed me 19 bucks and either the special DT'S or prime nut is an extra 10 to 15. Here is the prime with the prime nut ( first pic) and k41 tip in SS...I'm liking the k41 tip much better.
.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Last edited:
Very Nice!!!So I just got the steam tuners wave tank for prime...I'm loving the looks ....there are 3 options on the drip tips. One you can use the prime top nut, which allows you to use any 510 drip tips, with this option , depending on the height of your tip, it's not that much shorter then the standard prime.. you can also buy special drip tips that screw directly into the wave tank itself without the need for the prime nut. The 2 most available special tips are k31 & k32 which are 10mm in height by 10mm wide and have a bore of 5mm. With these tips, both in SS, the wave tank is the shortest it's going to be and has a total height , with drip tip, of 50mm. The 3rd option is the k41 drip tips, these also thread directly into the wave tank and are 12mm in height by 10mm width with a bore of 4mm. The k42 tips are available in SS, clear, and white. I have seen the wave tank being sold with & without the prime nut and if not, you either have to buy the prime nut separately or purchase the special DT's. The tank itself costed me 19 bucks and either the special DT'S or prime nut is an extra 10 to 15. Here is the prime with the prime nut ( first pic) and k41 tip in SS...I'm liking the k41 tip much better..View attachment 713807View attachment 713809View attachment 713811
Sent from my SCH-I545 using Tapatalk
Hey Mr. @AstroTurf do you still use the extension kit on your Kayfun Prime? If so do you notice any change in flavor?I just got the Prime and considering the kit.
KAS
Thanks, you were the only one that I could find that had bought one. I was just wondering what you thought of it, like any dramatic differences.
KAS
OK, It has been about a week...
I have not noticed a change in flavor, or coil longevity.
Only an increase in juice capacity and size.
Worth it? Yes!!!
Would I buy it again? Yes!!!
Hope this helps, Jim
Last edited:
- Status
