Authentic Svoemesto Kayfun Prime

[RadiusNick]

Just put my first order in fast tech. Ordered muji cotton pads, 26 guage wire and some tweezers e packet shipping all for 13$. Everything says authentic, will the wire be o.k to use.

have you seen there's a discount code right now,until the 20th?

 

[bask]

may I ask what happens when you open or close the juice flow an additional 1/4 to 1/2 turn either way?

The lame-o answer: Then the KF logo on the driptip is not aligned with the mod and facing towards me and I get sad. The honest answer: I played around with it a bit and for juiceflow for the thickness of the juices I mix and flavor this is the perfect setting and just adjusted the driptip accordingly. Which was a pita to adjust, because those are the tightest tolerances possible.

I feel the km3 and prime to be pretty much the same, in af , vapor, taste, warmth of vape, etc.

I've found the KF3 to be way more noisy, but I have never been a fan of loose af and that dang screw that makes it gurgle and sound loud is just a big let down for me. I've read that the plastic screw (also for KF4) helps with that, so I'm very interested in trying it out. I just can't find a shop that has ánd the KF3 spares kit ánd the af screws ánd the KF3 isolators kit. I'd be paying double the price with shipping costs if I order them directly from Svoëmesto I feel some of the temp problems were due to me running it too hot or quick 2x chain hits at work, as well as iffy TC on the VaporFlask (Wismeh version), but I often had dark gunk inside the chamber. Never had those problems with the Prime for some reason.

And the JFC is much smoother versus the Prime. Both attys, IMO, impart dripper quality flavor.

Sorry to hear about the senior deficiencies and my apologies if I made it sound like I was doubting your experience as a KF user. This has not been my intent. I do agree that the JFC on the KM3 (haha, nice rhyme) is a lot smoother and that it's kind of nice to have a very precise ánd set and forget AFC. I normally like 1 dot, but maybe twice a week feel like going 2 dots. This makes the Prime more practical.

In the end I'm just bummed out about the KF3. It's such a nice little tank and I want to love it.
I had a clone to try it out which was horrible, but I did like the shape and feel so I did buy an original.
I've had it for over 2 years now, but it has been standing in an atty stand for over a year.
Somewhere in the new year, when I have some money, I'll arrange the spares and isolators and plastic AF screws and hope I can finally be friends with it.

 

[vapdivrr]

Interesting, may I ask what happens when you open or close the juice flow an additional 1/4 to 1/2 turn either way?

Thanks, Jim

I find 1.5 turns good for me and if its turned down tighter, flavor diminishes, if its opened more, the coil gets over saturated and it becomes a little harsh and visibly less vapor

Sent from my SM-G960U using Tapatalk

 

[Bronze]

The lame-o answer: Then the KF logo on the driptip is not aligned with the mod and facing towards me and I get sad. The honest answer: I played around with it a bit and for juiceflow for the thickness of the juices I mix and flavor this is the perfect setting and just adjusted the driptip accordingly. Which was a pita to adjust, because those are the tightest tolerances possible.


I've found the KF3 to be way more noisy, but I have never been a fan of loose af and that dang screw that makes it gurgle and sound loud is just a big let down for me. I've read that the plastic screw (also for KF4) helps with that, so I'm very interested in trying it out. I just can't find a shop that has ánd the KF3 spares kit ánd the af screws ánd the KF3 isolators kit. I'd be paying double the price with shipping costs if I order them directly from Svoëmesto I feel some of the temp problems were due to me running it too hot or quick 2x chain hits at work, as well as iffy TC on the VaporFlask (Wismeh version), but I often had dark gunk inside the chamber. Never had those problems with the Prime for some reason.


Sorry to hear about the senior deficiencies and my apologies if I made it sound like I was doubting your experience as a KF user. This has not been my intent. I do agree that the JFC on the KM3 (haha, nice rhyme) is a lot smoother and that it's kind of nice to have a very precise ánd set and forget AFC. I normally like 1 dot, but maybe twice a week feel like going 2 dots. This makes the Prime more practical.

In the end I'm just bummed out about the KF3. It's such a nice little tank and I want to love it.
I had a clone to try it out which was horrible, but I did like the shape and feel so I did buy an original.
I've had it for over 2 years now, but it has been standing in an atty stand for over a year.
Somewhere in the new year, when I have some money, I'll arrange the spares and isolators and plastic AF screws and hope I can finally be friends with it.

Maybe the KM3 will work out better for you this time.

 

[bask]

Maybe the KM3 will work out better for you this time.

I really hope so. Then I will start the hunt for a Dicodes Tiny. That looks like such a fun and swanky setup.

 

[Bronze]

I really hope so. Then I will start the hunt for a Dicodes Tiny. That looks like such a fun and swanky setup.

The KM3 was perfect for a Provari with the tapered top. They were the same width.

 

[Nailz]

Moonlight Kayfun Prime came today, nice match with the Dani

 

[MikeE3]

the JFC is rather tight. Because of this, I have to grab the AFC ring to keep from turning the entire atty.

One of my wife's Primes was like that. Quite tight to open/close the JFC. None of our other primes was like that. I finally just swapped an o-ring it shipped w/ for one in the spares bag and now it's nice and smooth and easy to operate. Looking closing at the original o-ring I could see it was slightly misshapen and was likely causing a bit of binding when turning the JFC.

 

[Bronze]

One of my wife's Primes was like that. Quite tight to open/close the JFC. None of our other primes was like that. I finally just swapped an o-ring it shipped w/ for one in the spares bag and now it's nice and smooth and easy to operate. Looking closing at the original o-ring I could see it was slightly misshapen and was likely causing a bit of binding when turning the JFC.

I’ll have to give it a try. I lube it up better these days and it loosens up after a bit. But it has always been tighter than my V5’s and KM3’s.

 

[bask]

The KM3 was perfect for a Provari with the tapered top. They were the same width.

Yeah, too bad I struggle so much at life. Didn't have money in the Provari era, otherwise I'd probably would've owned a bunch. But if I can get my current situation together I'm definitely saving up for a Dani-box Mini. I think that would be a really rad present for myself.

Moonlight Kayfun Prime came today

It's so hard to gauge the actual 'colors' of those special editions.
This looks gorgeous, though. Seems to really fit the finish of the Dani (as far as I can judge from the shot).

 

[HBcorpse]

Yeah, too bad I struggle so much at life. Didn't have money in the Provari era, otherwise I'd probably would've owned a bunch. But if I can get my current situation together I'm definitely saving up for a Dani-box Mini. I think that would be a really rad present for myself.


It's so hard to gauge the actual 'colors' of those special editions.
This looks gorgeous, though. Seems to really fit the finish of the Dani (as far as I can judge from the shot).

There’s a Provari Mini v2.5 in the Classies right now...nice Emerald Green!

Good price too!

 

[bask]

There’s a Provari Mini v2.5 in the Classies right now...

I can’t get in the classies. Something with the forums being messed up or some shenanigans. And I don’t think I’m still interested in Provari. Think I’m going the Dicodes route. But thanks for the heads up. I do appreciate it.

 

[AstroTurf]

I can’t get in the classies. Something with the forums being messed up or some shenanigans. And I don’t think I’m still interested in Provari. Think I’m going the Dicodes route. But thanks for the heads up. I do appreciate it.

You have to be authorized to used the classifieds.

 

[AstroTurf]

I really hope so. Then I will start the hunt for a Dicodes Tiny. That looks like such a fun and swanky setup.

Good Luck with that...

Sent from my iPhone using Tapatalk

 

[AstroTurf]

The KM3 was perfect for a Provari with the tapered top. They were the same width.

Agreed...

Sent from my iPhone using Tapatalk

 

[bask]

Good Luck with that...

I’m fairly positive as I’ve also just managed to pick up a Telegonos for 40 bucks.

 

[JUMA55]

Make no mistake, the Kayfun Mini V3 is every bit as good. Different shape than the Prime but packs the same punch as the Prime.

I don't doubt that, but now that I've figured how to build the Prime, I need to stick with it. I'm not sure I have the skill to go back and forth.

 

[JUMA55]

I saw a extension kit for the Nite DLC, but can’t remember where it was now.

I do hope they do one.

 

[bask]

I do hope they do one.

If it is to your liking you could just use the High Noon extension. Seems to fit the theme well. Have a bit of fancy gold in with the black.

 

[JUMA55]

i don't have a seringue,but it definitely holds more juice in it as advertised.
i used to have to fill twice in an evening and now one filling is enough.

That's good to know. Don't shoot me, but I bought a clone of the PEI kit to try out. I just washed it yesterday, so I'll try it out later today.