ya both of ours should be going thru the same RnR
or else will just Swap them out & send I don't know.
or else will just Swap them out & send I don't know.
Carlos Juice Box (CJB) initial impressions
- Thread starter clyde2801
- Start date
- th_trl_thread_readers 0
- Status
i recieved my cjb unpacked it, followed the instructions,everything working flawless for 2-3 days then i flooded it. so now i have that great dripping machine people are talking about.after much study(or panic) of the jb and cause of flooding i found a solution
In case of flooding:
(1) remove bottle and follow carlos unflooding procedure(blowing through mouthpiece to clear atty)
(2) hold bottle in one hand and carefully squeeze until liquid rises to bottom of the neck of the bottle(can be lower-the goal is to remove as much air as possible)do not release bottle yet
(3) with other hand pick up jb and insert tube into bottle
(4) now turn the juicebox onto the bottle until seated
(5) once jb is seated tightly, release bottle
i do this everytime i install the bottle (refill,etc.)
this procedure has totally eliminated flooding
In case of flooding:
(1) remove bottle and follow carlos unflooding procedure(blowing through mouthpiece to clear atty)
(2) hold bottle in one hand and carefully squeeze until liquid rises to bottom of the neck of the bottle(can be lower-the goal is to remove as much air as possible)do not release bottle yet
(3) with other hand pick up jb and insert tube into bottle
(4) now turn the juicebox onto the bottle until seated
(5) once jb is seated tightly, release bottle
i do this everytime i install the bottle (refill,etc.)
this procedure has totally eliminated flooding
Explanation:
when the bottle filled with liquid is installed onto the jb the air inside the bottle gets trapped therefore creating pressure on the liquid forcing it up the tube and into the atty thereby flooding it.
by sqeezing the bottle before it is installed you will remove a substantial amount of air
and once the bottle is seated on the jb and you release your grip the bottle now will act as a vacuum stopping the liquid from traveling up the tube
Hope this tidbit is helpful.
Happy Vaping
ps.Clyde i will post a review later (lets just say the wait was worth it order#329)
when the bottle filled with liquid is installed onto the jb the air inside the bottle gets trapped therefore creating pressure on the liquid forcing it up the tube and into the atty thereby flooding it.
by sqeezing the bottle before it is installed you will remove a substantial amount of air
and once the bottle is seated on the jb and you release your grip the bottle now will act as a vacuum stopping the liquid from traveling up the tube
Hope this tidbit is helpful.
Happy Vaping
ps.Clyde i will post a review later (lets just say the wait was worth it order#329)
Huh. How much should the bottle be filled before you put it on the jb? Halfway? Three-quarters?
And you are right about the trapped air. I can still clearly remember the juice travelling slowly up the tube as I screwed on the bottle. Will have to try that once I get it back. You may want to consider sending that to carlos and suggesting he put it in his instructions.
If that stops the flooding problem, mad props to you, mad vapor.
When you say 'the wait was worth it', are you insinuating that K-D and I got some 'bad slave' boxes?
And you are right about the trapped air. I can still clearly remember the juice travelling slowly up the tube as I screwed on the bottle. Will have to try that once I get it back. You may want to consider sending that to carlos and suggesting he put it in his instructions.
If that stops the flooding problem, mad props to you, mad vapor.
When you say 'the wait was worth it', are you insinuating that K-D and I got some 'bad slave' boxes?
Last edited:
You can fill the bottle 3/4 of the way
yes it is possible you have gotten a slave
atty
yes it is possible you have gotten a slave
atty
Wow Nice tip Mad..
Carlos & I believe the smaller tube causes airflow issue tighter drag But less vape.
Remove the bottle & massive vape.
Add filler to the tip & bring more suction & a filter for those with issues.
Those are some things we came across trying stuff out.
Thanks mad.. When I get my atty back I will have to test that.
Carlos & I believe the smaller tube causes airflow issue tighter drag But less vape.
Remove the bottle & massive vape.
Add filler to the tip & bring more suction & a filter for those with issues.
Those are some things we came across trying stuff out.
Thanks mad.. When I get my atty back I will have to test that.
I am such a loser. I am not home and brought my JB with me. Well hellsbells, my battery has died and I did not bring the multi charger with me. I soooooo suck. Good pointers guys. Thanks!
Your Welcome..
And I can't wait to Try the bottle thought out.
BTW Carry a Charged battery with you LOL
And I can't wait to Try the bottle thought out.
BTW Carry a Charged battery with you LOL
Awesome review clyde! I just got my CJB today... but my batteries aren't here :-( hoping your tid bits along with others i have read will make my "seasoning" period quick and easy! good to see you guys are loving yours!
Yes maktak. we just waiting our atties to return. with slight improvement.
Carlo's is a good guy & thinking of getting another unit from him.. in a few months.
Make sure you drip for a bit to get use to when your running low on juice & try mad's tip.. I think that would work very well.
I removed bottle from atty & play'd with different idea's & found some stuff to help me out.
Sorry tina.. U asked for it.
Carlo's is a good guy & thinking of getting another unit from him.. in a few months.
Make sure you drip for a bit to get use to when your running low on juice & try mad's tip.. I think that would work very well.
I removed bottle from atty & play'd with different idea's & found some stuff to help me out.
Sorry tina.. U asked for it.
KD;Yes maktak. we just waiting our atties to return. with slight improvement.
Carlo's is a good guy & thinking of getting another unit from him.. in a few months.
Make sure you drip for a bit to get use to when your running low on juice & try mad's tip.. I think that would work very well.
I removed bottle from atty & play'd with different idea's & found some stuff to help me out.
Sorry tina.. U asked for it.
Has Porphy posted updates on next batch yet?
EDIT... Never mind just found his post (sigh)
So adding filler to the tip helps? I'm still not getting nearly as good of a vape with the bottle on
Know what you're going through; I'm the president ex officio of the 'c'mon c'mon c'mon club'. But the CJB is a very complex, handmade mod. Knowing now what I didn't know then, I'm currently part of the 'whoa, whoa, whoa' society. I'd much rather carlos take his sweet freakin' time and get mine just right rather than feel rushed to meet a shipping deadline.
I have noticed that there is a lot of liquid leaking into the box. What causes this and how can I prevent it?
mine leaks around the bottle/bottlecap connection when i push on the bottle, also a little out the back of the epoxy where the wires come out. Not much though, I'd say when an 18650 dies and its time to change the battery swab the box out with a qtip. doesn't need it more than twice a day.
Just received my JB today and airflow is adjustable via the clear plastic atty hose....
Sorry if this is a dupe....
Sorry if this is a dupe....
Zero what do you mean it is adjustable? how?
and got my batts today and woah... FOG MAchineee! the girlfriend thought i was fishbowling the bedroom with vapor today hahaha. the "seasoning phase" is off to an awessommee startt!
- Status
Similar threads
