3 bucks a pop, jesus christ, does it pay the rent for me and cook my dinner.
E2 Cartomizer Technical Discussion
- Thread starter zoiDman
- Start date
- th_trl_thread_readers 0
- Status
well i did try the other one of quick1's picks, the ego supercartomizer, and at $3 a carto that i paid, it was too leaky, and one out of the few i got didn't work at all, and they costed me even more than the old filler cartos
.
I've tried'em both and neither come close to the performance of the e2. IMO, anyway
Try the regular one then. They're more normally priced. The eGo ones are really heavy duty though. If you overfill (either one) you can stick your needle down a little well on the side and suck out the overage.
and the eGo is $4 bucks a pop. $17 for a 5 pack.
Did they fill the cup with cotton now? Back to square one lol
My R3's are doing nicely. They don't leak (well maybe one little leak every 3 days) and vape well. The only issue is they go a bit dry sometimes but that can be fixed by rotating the carto around a bit.
My R3's are doing nicely. They don't leak (well maybe one little leak every 3 days) and vape well. The only issue is they go a bit dry sometimes but that can be fixed by rotating the carto around a bit.
Let me see if I understand this correctly...
You gave them the correct shipping information?
They got the zip code wrong?
(that's what happened right?)
You tracked your order to the wrong state.
You tried to correct it with USPS (who said the shipper had to do that).
You told them they had to be the ones to change the delivery address.
They told you it wasn't their problem and your only recourse was to dispute the charges.
You did that.
They canceled your account.
so... now you're wanting to throw more money and shill for them to get back in their good graces. That about it?
If that doesn't work out for you maybe you could hire v1john to order for you. Maybe pay him an extra quarter per cart.
I'm going to wait for r11 and a local supplier
That is it in a nut shell. The money is no big deal, I am just itching to try one of these.
Bad, you are the "MAN".
I was hoping someone would lend a hand, thanks for the offer.
Wayne
I was hoping someone would lend a hand, thanks for the offer.
Wayne
Got the Joye cartomizers yeaterday. I like em, there okay, but filling them is a mess and not an exact science. After watching the video's of the e2 it appears you can see what your doing. The vapor is good but nothing like what I see in Bads video's.
My PTB mods aren't wicking very well today, at work and alternating between 4 of them, even letting some rest upside down. Should there be 4 layers of PTB in the tail part and 12 or 16 layers for the part that sits next to the slot? Does the tail need to reach the bottom of the carto? Sorry to be so dense .....
Lol, "dense". Aren't those guys using something like 3 or maybe 4 layers all the way? I haven't kept up.
fold the ptb long way like in my video 2 times , the you fold from one end the size of the cup, fold that 3 times, cut off the excess form the tail and thin the tail out a little bit and your done.
yeah something like that.lol you can also just cut it to lentgh and make it tubed shape and stick it in like that as well.
Is there a listing of versions and revisions by the 'production date' on the box or is it just a matter of eyeballing the construction?
My order from 9/2 just entered the US "today" just barely past midnight. Can't wait!!
Due to FDA garbage I feel like I need to place a huge order...like yesterday. What do you guys think about the need to stock up quick (or not) due to FDA??
What do you guys recommend on ohms on the E2s for 808 3.7volt batts? Are reg length or XL the way to go? I'm about to get a small variety (when they arrive) but I may order again before they come...so I would love any advice!! Will have the LS soon but am hoping to still be able to use my 808s frequently with what ever I purchase!!
Keep enjoying! Love PTB!!!!
Due to FDA garbage I feel like I need to place a huge order...like yesterday. What do you guys think about the need to stock up quick (or not) due to FDA??
What do you guys recommend on ohms on the E2s for 808 3.7volt batts? Are reg length or XL the way to go? I'm about to get a small variety (when they arrive) but I may order again before they come...so I would love any advice!! Will have the LS soon but am hoping to still be able to use my 808s frequently with what ever I purchase!!
Keep enjoying! Love PTB!!!!
Last edited:
This one is better than the last one. I knew it from the first rattle out of the box. Even though it has the same 2.8Ω resistance, the juice crackles in this one when vaped and the other one did not. At the present time, the filler ring is still installed, but the mouthpiece and center ring is replaced with a modified whistle tip from a 510 cartridge.
I broke this one in without cleaning or dry burning. I dripped a couple drops of juice on the coil and vaped it off. The taste wasn't near as bad as expected, so I pretended that I was a dripper and continued to use it for a while. Before long, the taste was good and I filled the tank. It has been good every since.
For me and my juice, the taste is better on the lower voltage of a Joye or Hello type battery than it is on a KR8 battery. That's the way I am using it now because this is no longer a test and I am just vaping for pleasure. I just wish it had 510 threads instead of KR8 threads.
So, this is the one I have been looking for folks. I've had other E2's work this well, but I had to force them to be that way. I am not having to monkey with this thing, fiddle with it, or tinker with it. It has not leaked in any position all day long. I don't know what it will do after laying on it's side overnight, but I don't care. I can easily live with that. As far as I am concerned, it is a keeper. I hope the next new one I open up will be too.
But then, I know they won't all work this way. The reason I know this is because the groove in the under side of the filler ring is exactly like the mod that I have been using on all of my E2's every since the first one. It wicks well on most, but not all. It doesn't leak on most, but it does leak on some of them. Same song, second verse. It could get better, but it may get worse.
I broke this one in without cleaning or dry burning. I dripped a couple drops of juice on the coil and vaped it off. The taste wasn't near as bad as expected, so I pretended that I was a dripper and continued to use it for a while. Before long, the taste was good and I filled the tank. It has been good every since.
For me and my juice, the taste is better on the lower voltage of a Joye or Hello type battery than it is on a KR8 battery. That's the way I am using it now because this is no longer a test and I am just vaping for pleasure. I just wish it had 510 threads instead of KR8 threads.
So, this is the one I have been looking for folks. I've had other E2's work this well, but I had to force them to be that way. I am not having to monkey with this thing, fiddle with it, or tinker with it. It has not leaked in any position all day long. I don't know what it will do after laying on it's side overnight, but I don't care. I can easily live with that. As far as I am concerned, it is a keeper. I hope the next new one I open up will be too.
But then, I know they won't all work this way. The reason I know this is because the groove in the under side of the filler ring is exactly like the mod that I have been using on all of my E2's every since the first one. It wicks well on most, but not all. It doesn't leak on most, but it does leak on some of them. Same song, second verse. It could get better, but it may get worse.
It's a nice new monday morning, and...
the r4 is up on the website!!!
and no one will get them until they sell all of the r3's
- Status
Similar threads
- Locked
- Locked
