Status
Not open for further replies.

br5495

Old Man Resting in Peace
ECF Veteran
May 24, 2010
3,061
2,049
90
Liberty, Texas
Yea I thought about that too Br...I dont know if it might pull the cup out with it...plus it would have to align with the slots in the cup. It may work..I'll try it too.

Mine were made before the filler ring with the notches, but so far I haven't needed them. The grove is the exact depth of the new filler ring, which is also the same as the underside of the first E2 mouthpiece. Mine go in okay if the cup is centered before installing. They do not fit tight in the tube, and so far they do not leak. Of the E2's I have used, the ones with the stainless steel finish have a wee bit smaller tube than the ones with the black wrap. If I make some more, they will have an "O" ring so that one size fits all. No problem removing them. If you push on them too hard while installing, the complete assembly may come out at the threads (some come out easier than others). This can't happen while the battery is installed.
 

nicotime

Ultra Member
ECF Veteran
Nov 22, 2009
1,951
862
Montoursville, PA
I wish i could make BR a youtube sensation. im gonna think of something.

Just get him to sing......

"Where, oh where, are you tonight?
Why did you leave me here all alone?
I searched the world over, and I thought I'd found true love,
You met another, and PFFT! You was gone!"

Maybe Minnie Pearl with him for a duo! lol
 

nicotime

Ultra Member
ECF Veteran
Nov 22, 2009
1,951
862
Montoursville, PA
Mine were made before the filler ring with the notches, but so far I haven't needed them. The grove is the exact depth of the new filler ring, which is also the same as the underside of the first E2 mouthpiece. Mine go in okay if the cup is centered before installing. They do not fit tight in the tube, and so far they do not leak. Of the E2's I have used, the ones with the stainless steel finish have a wee bit smaller tube than the ones with the black wrap. If I make some more, they will have an "O" ring so that one size fits all. No problem removing them. If you push on them too hard while installing, the complete assembly may come out at the threads (some come out easier than others). This can't happen while the battery is installed.

Yea...as long as there is enough wick filling the slots in the cup...it could just sit flat on top the cup. I never had any of the older ones...hell this is my first carto ever...I did attys all this time.
 

br5495

Old Man Resting in Peace
ECF Veteran
May 24, 2010
3,061
2,049
90
Liberty, Texas
Yea...as long as there is enough wick filling the slots in the cup...it could just sit flat on top the cup. I never had any of the older ones...hell this is my first carto ever...I did attys all this time.

I started out with cartoz, but have tried most attys. Here's a look at my best atty. It produces more vapor than bad's E2.
atty.jpg


It does its best at about 4.2 volts or better.
 
Last edited:

badkolo

ECF Guru
ECF Veteran
Oct 17, 2009
11,274
21,917
Whitestone , New York USA
I just had a semi dejau flashback moment.

it was a year ago this month i was sitting here at my desk with my first e-cig, i got suckered and bought a smoking everywhere e-cig, the ones that look like a cig and i think it uses a 306 atty and a cartridge.
when i first used that ecig it worked perfectly and was a auto battery, and i was so happy that it fealt like a cig and performed like one too, i was amazed and shocked but most importantly i was 100% satisfied with the amount of vapor it gave and the chest feeling.

That went away the moment the cartridge ran out , i then would use a new cartridge and it was happy times again until i ran out and then the HORROR began.
I needed more juice, i need to refill them, they get funky after a while and so on, so then i was in search for a better experience and ever since i lost track iof what i was looking for in a cigarrete replacement.
then i turned to dripping and carto and then bad juice and the horror just continued for months and months and tons of money spent and still unhappy.

SO now i was sitting back and after a full day of getting accustomed to using the e2 like I originaly remember how I should be using it and that is like a analog. So im laying back and vaping on this e2 with simple 1 or 2 second drags just like a analog and its just been performing so wonderfully that i fell into a moment of bliss, just fill and vape for hours and I dont need to stress myself and vape long huge drags, I did all that out of the horror and not becuase its needed.

Im at a very happy place right now witht the r4.
 

badkolo

ECF Guru
ECF Veteran
Oct 17, 2009
11,274
21,917
Whitestone , New York USA
I started out with cartoz, but have tried most attys. Here's a look at my best atty. It produces more vapor than bad's E2.
atty.jpg

Thats it BR, i had enuogh, ITS ON, tomorow at 3pm in the ally, you bring your best and prepare for a vape-off

wait a second, thats not even a e2. your pulling out a 801 against my e2, that like pulling out a shotgun while im holding a watergun.

but just like a shotgun your 801 shoots maybe twice, meanwhile i would drown you with my watergun.(e2)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread