Scubabatdan... My goodies came in yesterday, and I finally got to use your spreadsheet. Just a quick, HUGE Thank You!!!
Ejuice calculator (added quantity calculations)
- Thread starter Scubabatdan
- Start date
- th_trl_thread_readers 0
- Status
YAY!!!!
Banana Dance!
Remember if anyone want to contribute recipes to v14 please copy Your recipe spread sheet to a new workbook and send me that xls file (Just the recipe worksheet) to scubabatdan@yahoo.com
Dan
Thanks for your work SBD. Anything that contributes to my DIY "habit" is much appreciated.
dan
i have v13 downloaded on my computer, when you put in all new recipies , will it show up on tne v13 that i have, or do i have to down load v14
i have v13 downloaded on my computer, when you put in all new recipies , will it show up on tne v13 that i have, or do i have to down load v14
is it out yet? v14
just wondering if i missed it ,thats all, if not, i can wait,.
Thank you all
just wondering if i missed it ,thats all, if not, i can wait,.
Thank you all
Last edited:
Scubabatdan... What an effort. You sir are to be congratulated in the highest manner. I just started e cigs and ordered a bunch of DIY stuff to save money on my juices. Your work here is just amazing. I once played with a spreadsheets years ago and found the learning curve to be more than I wished to endure. My hats off to you for the work you've done as well as sharing it with everyone here. If your ever in New Mexico PM me and I'll take you out prospecting and guarantee that you'll have gold in your pan. Its a great adventure.... Tortoise
Cool, sounds like fun
My next trip is VapeStock, and after that is Alaska. Appreciate the offer though!
Dan
Cool, sounds like fun
My next trip is VapeStock, and after that is Alaska. Appreciate the offer though!
Dan
You get up to Alaska and I'm telling you... they have some of the best gold prospecting anywhere. Not to mention the great fishing, river trips, and hunting. I've gotta get up there sometime before I die for sure. Have a great trip and the best of luck to you.....Tortoise
When using the spreadsheet, if I try to add a recipe it says that macros are disabled because my security level is set to high and the document is unsigned. I went into the settings and changed the security level to low but I still get the same pop up about security level being set to high so I cant use the macros. Any one have any input for me?
You should be able to go into Excel's Trust Center and enable macros for the sheet withou changing your overall security level settings.
I seem to recall a post around #300 that went through the steps for one version of Excel, but it's fairly easy to find.
I seem to recall a post around #300 that went through the steps for one version of Excel, but it's fairly easy to find.
Ok if this is posted in the wrong place plz move. I am using my phone at work and don't have much time to keep looking for the answears
I am new to DIY juice I have a juice calculator and have been making pretty good juice but I am almost positive I am missing something and belive its alcohol . Can anyone tell me what kind of alcohol I need to use and how much to use ?
I am new to DIY juice I have a juice calculator and have been making pretty good juice but I am almost positive I am missing something and belive its alcohol . Can anyone tell me what kind of alcohol I need to use and how much to use ?
If you are mixing up juice with vg in it, it can be too thick to wick properly in some atomizers. Generally, I think something like 10% of the volume of vg you add pure alcohol. So I had a bottle of boba's bounty (90/10 vg/pg i think) it was about 18 ml, so it's probably 16ml vg, so I added about 1.6ml alcohol. Pure alcohol thins better than water, but can be hard to get in some states, vodka or even just plain water works to thin also, just need a little bit more.
I have Microsoft Office Starter but when trying to download this calculator it's telling me I have a problem with licensing and it won't finish. Do I have to have the full Excel version? I've a read a little around this thread and haven't noticed any posts with this problem so it's probably my bad luck and my problem alone. I wish I could use this for the ability to easily figure larger batches from my test samples. Boohoo, so sad... too bad!
It's be nice to see the file in a non proprietary format... Then people wouldn't have to use excel. Unless the OP gets a cut of microsoft sales our something...
The trial version of excel should work. I have full, there was a bar at the top I had to click to enable editing, then again to enable macros.
You could also try 'open office calc' in the open office suite. It's completely free for the full version, and hopefully works also. It seemed to be working when I opened the file. You still have to enable macros in open office also. Or you could try google docs. Also free.
It's 2011 people, stop using microsoft office file types. It was cool when they were the only game in town, but now you just lock people in to their software. There are open standards for a reason.
Sent from my HTC HD2 using Tapatalk
The trial version of excel should work. I have full, there was a bar at the top I had to click to enable editing, then again to enable macros.
You could also try 'open office calc' in the open office suite. It's completely free for the full version, and hopefully works also. It seemed to be working when I opened the file. You still have to enable macros in open office also. Or you could try google docs. Also free.
It's 2011 people, stop using microsoft office file types. It was cool when they were the only game in town, but now you just lock people in to their software. There are open standards for a reason.
Sent from my HTC HD2 using Tapatalk
seems to work fine with OpenOffice on my Linux laptop. Doesn't get much more open and free than that. I think most people know what a .xls file is, but few know what a .ods file is. So excel format is a perfectly acceptable choice for this venue. This is a pretty complex set of sheets, something simplistic like google docs will just not handle a setup like this without dumbing it down quite a log. But, between MS Excel and OpenOffice everyone should be able to use this without an issue or cost.
Cool. Anxiously awaiting your open standard calculator.
Let us know when you're releasing it.
I doubt anyone will see this as the thread is so old but can anyone make a calculator that an APPLE MAC user can download and use, I know we are a rare breed but we are out there and some of us are vapers into DIY [';]]]
- Status
Similar threads
- Locked
