Eleaf Lemo II
- Thread starter Vapenstein
- Start date
- th_trl_thread_readers 0
- Status
I went to the the Billow v2 for my daily tanks. I have also added Aromamizer RTDA to my daily use. Haven't decided on which I prefer yet. Both are dual coil instead of Lemo single coils. I am a flavor chaser and fine the Lemo, Lemo Drop and Lemo 2 to be way behind in flavor and much harder to maintain. I keep 10 tanks in my rotation, currently 8 Billow v2 and 2 Aromamizer RTDAs. I can clean rebuild and rewick alot faster than fiddling around with any of the Lemos. I have 12 of them in my junk box. I have a bunch of Kayfuns original and clones in there too. I think I need to do an ebay sale.
Sorry if this has already been covered but I was having problems with dry hits after rewicking and the solution I found on reddit was NOT to tighten down too hard on the glass. Keep loosening it until the glass spins freely (with some resistance of corse) and you see a steady flow of bubbles after taking hits. You should see at least one or two good size bubbles rise from the juice holes EVERY time. Hope this helps those of you with problem! It was the game changer for me. Also use plenty of wick without blocking the juice holes.
I think that may be just allowing an air leak by loosening the glass. If an air leak is needed to make it wick, you may have too much cotton in the chimney. If this works for you and you want to keep doing it, might be just as easy to open the fill port a tiny bit -- same effect: an air leak.
Opening the fill port dosnt get me the same effect. But when I spin the glass i can see the bubbles coming from the juice holes. With the glass too tight i see no bubbles when vapeing. With it slightly loosend I can. I cant imagine theres an air leak if no juice is seeping out even when placed upside down it still is holding in the juice all the way around.
I'm just wondering if it's not a way for air to enter the top of the atty, then what does having a loosened glass tank do?
"O" Ring could be blocking channels when tight, indicating faulty ring or possibly two "O" rings.
Easy thing to do as they are transparent and hard to see.
Easy thing to do as they are transparent and hard to see.
The reason for that is if the glass is squeezing down too tight the o-ring and therefore limiting the juice channel. It doesn't have to be loose, but just not so tight to squeeze the o-ring.
Yes i didn't mean so loose that its a step from coming apart just not so tight that opening the fill hole is a struggle. With it cinched down too tight I was having my problems but since being cautious it seems to be working better for me. Idk why it worked but it did for me. Maybe magic or vapor fairies ?
I guess jcmcphail ain't interested in sellin me his Lemo 2s but here is a good deal if you're interested in one
LEMO 2 RTA 24.99Eleaf Lemo 2 RTA - rebuildable tank atomizer from iSmoka
Eleaf Lemo 2 RTA - rebuildable tank atomizer from iSmoka
LEMO 2 RTA 24.99Eleaf Lemo 2 RTA - rebuildable tank atomizer from iSmoka
Eleaf Lemo 2 RTA - rebuildable tank atomizer from iSmoka
I just noticed vaporbeast has another lemo 2 deal of the day going again. With coupon code "summer" it knocks it down to like $12.55 before shipping.
Clearomizers & Tanks | Eleaf Lemo V2 Atomizer | VaporBeast
Clearomizers & Tanks | Eleaf Lemo V2 Atomizer | VaporBeast
Yup ... I just ordered a Lemo 2 from VaporBeast
Using the coupon code, the [final cost] to my door in Florida was just $15.49
Can't find it any cheaper than that anywhere I have ever seen!
That is a wicked deal. I paid double that for my first one, and 20 bucks for the second one.
Been out of town, but would be glad to part with my Lemo 2s at last count I have 4!I guess jcmcphail ain't interested in sellin me his Lemo 2s but here is a good deal if you're interested in one
LEMO 2 RTA 24.99Eleaf Lemo 2 RTA - rebuildable tank atomizer from iSmoka
Eleaf Lemo 2 RTA - rebuildable tank atomizer from iSmoka
I realize no buying or selling, just stating I am ready to part with them. I will be passing my Lemo 2s on to my grand son-in-law and my step grand son. Both are vapers with tight budgets. They always get stuff from my junk drawer, and are always excited when they visit PopPop. Besides the blowout deals on the net are very good values for people looking for them.
You can buy and sell in the classifieds. This coupon has reduced to make it 20.67 each. Was 13.28
Eleaf Lemo V2 RBA for $
Clearomizers & Tanks | Eleaf Lemo V2 Atomizer | VaporBeast
Got mine in from vaporbeast yesterday, although I'm still not sure why I ordered it, for $15 I figured at least I remember liking the drip tip on my RDAs. This one had liquid in the top fill area, base, and top cap, not sure if it was machine oil, or if I am to believe eleaf and that it was eliquid, but either way gave it a bath, and cleaned it up.
I was tempted to try the stock coil, and massive amount of cotton, but had to take it out for cleaning.
The tank itself still sucks, and is terribly designed, but you all know that already. I put a single Ti coil, wicked with rayon, and its vapes, flavor is muted with the stock DT, tried a KF4 DT and flavor improved slightly.
I was tempted to try the stock coil, and massive amount of cotton, but had to take it out for cleaning.
The tank itself still sucks, and is terribly designed, but you all know that already. I put a single Ti coil, wicked with rayon, and its vapes, flavor is muted with the stock DT, tried a KF4 DT and flavor improved slightly.
I actually liked my lemo 2 better than the billow v2. I hated the first lemo, I just thought it was awful. however I really do like the lemo 2. I haven't had ANY issues with mine. No leaking, Nov dry hits, no problems what so ever. I'm building at a .5 and using native wics cotton. I've actually had excellent flavor and huge clouds at only 30 watts. I can do a honest comparison as I have a HUGE collection of RTAs as I'm always looking to improve. it's became a collection. I think the lemo 2 can hold its own against most. flavor wise it's pretty good. Not quite as good as the kayfun 4. This is just my opinion based on my own experiences. I've read some of you are having issues with the lemo 2 but that's not been the case with mine. if your having issues I suggest to take the unit apart entirely. when you reassemble it, make sure the O rings.could are seated correctly and everything is on and tightened properly. sometimes a slip of a O ring can cause a disaster. I was really shocked on how great my lemo 2 performed! it's super easy to fill, super easy to build and wic, and it has great flavor and has a better than average vapor production. My first lemo 1, leaked like a sive but I haven't had a single leak with this lemo2. I can chain vape without getting a dry hit at all. with the experience I've had with my lemo2, I can't help but recommend this unit.They really have improved it a lot!! I know some of you have had a different experience but my lemo 2 has been absolutely wonderful. I can't believe how much I'm loving it after absolutely hating the lemo 1. I think the lemo2 is very much worth buying. speaking from my experience with it I don't have any negative things to say about it.
- Status
