I have a drill, titanium drill bits too.....don't have a vise to hold it while drilling though.....airhole does need to be bigger.
Finally I get it (IGO-L) wowwwwwww
- Thread starter nickvegas
- Start date
- th_trl_thread_readers 0
-
- Tags
- myvaporstore protank provari vamo
- Status
Personally I don't need a bigger hole but that's me I just received 2 more IGO-L today and may make 1 of them larger.
The IGO-L steel is soft. HS drills will plow right through. Such a short distance to drill I just held them in my hand. Done in a flash!
If you got an Igo L with a loose top, don't use plumbers tape. Grab a spool of dental floss 1 or 2 wraps and you'll be good to go. All they did as far as I know was changed the o rings to snug it up. I do like my Igo L but love mt aga t2 
what do you recommend I use on my new coil. Its built at 2.2 ohm. I usually run 4.6V on a 3.2ohm coil. Not sure what to set it up as 2.2ohm. Just want to compare the two side by side.
Got an IGO-L yesterday just to get my feet wet and learn rba ways while I wait for my more "exclusive" units... I bought mine at a my local B&M store here in SoFla (BocaVapes) and Kevin (the owner) helped me set it up for the first time... I added a few drops of his Speargun Brownies juice in 24ml (Brownie/Coffe flavor) and took a hit of the thing... "Knocked on my behind" is an understatement; the thing made my head spin it was so strong and flavorful. I am now getting used to the increased strength of the vapor and enjoying the living lights out of this little unit. Will pick up two more next week so I don't have to be washing/re-wicking/re-coiling every time I want to switch flavors.
I'm sold on RBAs... These things are amazing and if a $15 unit can give me this kind of satisfaction; I can't wait to get my hands on a proper unit like a Senesis or a Foggy to put on my JM22.
I'm sold on RBAs... These things are amazing and if a $15 unit can give me this kind of satisfaction; I can't wait to get my hands on a proper unit like a Senesis or a Foggy to put on my JM22.
From what I understand the difference between cheap and expensive rba are the build quality. Many ppl say the performance of vape is your coil and wick build not the atomizer itself.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I'm quite sure that the difference in flavor/throat-hit are more related to the quality of the wick/coil one can make... Having said that; I'm a bit of a skeptic and have to test out that theory for myself... So; I'm saving up for a Foggy T22 and will try to find me a Doodlebug on the 2nd hand market or maybe land one on the new batch scheduled for June.
What type of coil do you have running on it? Just curious as to what Kevin set you up with.Got an IGO-L yesterday just to get my feet wet and learn RBA ways while I wait for my more "exclusive" units... I bought mine at a my local B&M store here in SoFla (BocaVapes) and Kevin (the owner) helped me set it up for the first time... I added a few drops of his Speargun Brownies juice in 24ml (Brownie/Coffe flavor) and took a hit of the thing... "Knocked on my behind" is an understatement; the thing made my head spin it was so strong and flavorful. I am now getting used to the increased strength of the vapor and enjoying the living lights out of this little unit. Will pick up two more next week so I don't have to be washing/re-wicking/re-coiling every time I want to switch flavors.
I'm sold on RBAs... These things are amazing and if a $15 unit can give me this kind of satisfaction; I can't wait to get my hands on a proper unit like a Senesis or a Foggy to put on my JM22.
Here's a picture of the setup... He did some sort of a "double back on itself" wick with a five loop coil (reading 2.5 Ohms). I don't want to go to the super low resistance coils until I get my mechanical (JM22).
To fix the loose topcap, take off the o rings, wrap around 1 turn of teflon tape, and refit the o rings.
That'll be just as easy. I drilled my AGA-T+ and RSST's the same way. Most all the Chinese rba's are thin-walled.
Ah my friend.... try drilling the an A-7. You'll need a freakin' kryptonite drill bit. They are thin walled too, but harder than a rock. Cobalt was the only thing that would get through it. Glad your AGA-T+ and RSST's were easy to get thru
Last edited:
To fix the loose topcap, take off the o rings, wrap around 1 turn of teflon tape, and refit the o rings.
Very good Idea will try it.
To fix the loose topcap, take off the o rings, wrap around 1 turn of teflon tape, and refit the o rings.
Hmmm...I got 3 of the loose cap Igos yesterday (my original was tight fitting), not sure if I want teflon tape that close to my ejuice - any concerns there?
Does anyone know what size o-rings are on the tight fitting Igos? If I can just order some or run down to the hardware store, that would be great!
- Status
Similar threads
