Genisis / Kronos Update

[debb]

The Genesis LV is a great design, and wicks extremely well. I've been on the same coil / wick for over a week now. The vapor production is great, and the flavor excellent.

The hard, plastic mouthpiece had to go.. It leaked air despite an O ring installed, so I forced in a silicone soft-tip for a LEO 4ml dual coil carto. It looks more in proportion to the LV IMO, and is air-tight. Tightened up the draw more to my liking also.

same here tech....mine actually stopped screwing on...just might look for my Leo set up and steal a dt from it...lol

 

[lexi60]

in case anyone forgot about these.
http://www.vapor-age.com/701-mouth-piece-to-510901-drip-tip-adapter-_p_51.html
These are nice....just sayin.

 

[Technonut]

in case anyone forgot about these.
http://www.vapor-age.com/701-mouth-piece-to-510901-drip-tip-adapter-_p_51.html
These are nice....just sayin.

First time I've seen that adapter... Thanks for the link.. The LEO dual-coil carto soft tip does work quite nicely, but I have some SS 510 DTs by Siam mods coming in soon which may look great using the 701-510 adapter.

 

[mianker]

in case anyone forgot about these.
http://www.vapor-age.com/701-mouth-piece-to-510901-drip-tip-adapter-_p_51.html
These are nice....just sayin.

I bought the SS one and find that although it works fine the threads aren't a perfect fit. So be careful.

 

[VapRon]

At InTaste.de they sell other tips for the Genisis now. I have not gotten one yet so can not comment on the fit. I think I am getting one with my Genisis that I ordered there. Will repot about the fit then.

The Genesis LV is a great design, and wicks extremely well. I've been on the same coil / wick for over a week now. The vapor production is great, and the flavor excellent.

The hard, plastic mouthpiece had to go.. It leaked air despite an O ring installed, so I forced in a silicone soft-tip for a LEO 4ml dual coil carto. It looks more in proportion to the LV IMO, and is air-tight. Tightened up the draw more to my liking also.

 

[mianker]

in case anyone forgot about these.
701 mouth piece to 510/901 drip tip adapter
These are nice....just sayin.

I bought the SS one and find that although it works fine the threads aren't a perfect fit. So be careful.

 

[VapRon]

Here is the liknt to the tips if anyone wants to look.
it is under Genisis Mundstücke.

Genisis Mundstücke - InTaste

 

[Technonut]

The Siam Mods SS DTs arrived.... I was looking through my vape gear box, and found that the top silicone grommet from one of my old CE2 Storm Tanks fits the GLV, and allows the DT to fit like it was made for it..

Click To Enlarge:

 

[debb]

in case anyone forgot about these.
701 mouth piece to 510/901 drip tip adapter
These are nice....just sayin.

that's next on my list....I tried to order awhile back but they only did mo's...

 

[sanjosse]

The Siam Mods SS DTs arrived.... I was looking through my vape gear box, and found that the top silicone grommet from one of my old CE2 Storm Tanks fits the GLV, and allows the DT to fit like it was made for it..

Click To Enlarge:

Technonut, that looks killer on a Don! Is it KICKED as well? If it is, does it make a difference? I've heard it's not really needed!

I received my shipping notice about 10 days ago. I'm so ON pins and needles!!! I've been giving the mailperson the stinkeye when I noticed he/she doesn't have a semi-small brown box in their hands. I'll have to make up for it later. Maybe giving them a big something-or-other - LOL!

 

[Desert Rat]

Just so you guy's know the Vapor Age adaptor is the right thread its the GLV that is off poor machining.

 

[VapRon]

I was wondering about that because I had no real problem with that adapter. From the 3 I got only one did not fit 100% but still went on ok. All 3 are tight.

Just so you guy's know the Vapor Age adaptor is the right thread its the GLV that is off poor machining.

 

[lorderos33]

I was wondering about that because I had no real problem with that adapter. From the 3 I got only one did not fit 100% but still went on ok. All 3 are tight.

One of mine did not fit either, but I got 3 and the other 2 fit OK

 

[Technonut]

Technonut, that looks killer on a Don! Is it KICKED as well? If it is, does it make a difference? I've heard it's not really needed!

I received my shipping notice about 10 days ago. I'm so ON pins and needles!!! I've been giving the mailperson the stinkeye when I noticed he/she doesn't have a semi-small brown box in their hands. I'll have to make up for it later. Maybe giving them a big something-or-other - LOL!

Not Kicked......................Yet... I have been enjoying the GLV on my VV devices. I wrapped one coil so far in a week, and just tune the voltage to where I like the vape best. Sure, I could take it apart, and remove a coil to change the resistance, but it's just more convenient to tune the voltage in since I have VV mods.

I hope you get your package soon Shouldn't be long now...

 

[Shead]

On the other forum Tai posted about having 3-400 packages left to send and they they should be out by the end of the week
Hope mines in that list since he hasn't returned any emails

 

[sanjosse]

Order #2884

JUST ARRIVED!!!!!!!!!

Uwe and friends, it looks PERFECT, Thank You So MUCH for your patients and commitment!

I haven't had a chance to fire it up yet… some people gotta work for a livin'.

 

[DetroitVapor]

Received my shipping notice on 3-20 and my package showed up today. Im in detroit. Can't believe it got here so fast.

First set up has huge throat hit, good vapor, and amazing flavor.

Thanks, Uwe, and all the active co-op members who made it possible. Extra special thanks to Raidy!

 

[Technonut]

If anyone has 4-6 bottles, and one of the SS or Delrin 701-510 DT adapters to spare, please PM me to work out the details.

 

[jamesd1628]

Great idea Mianker. I've got some pipettes and 3ml bottles on the way to try this. As I posted earlier in the thread, I dropped my GLV at one point and the glass bottle broke off with the glass threading still in the plastic cap. If that happens, there is virtually no hope of getting the glass out of the cap. I destroyed the plastic cap trying to do that and ended up just putting in a new one. Not difficult, but a PITA if you're out and about with no backup. Plastic is a much better material for this given how often I drop my pv.

Oh, and I just want to reiterate how well the GLV performs - it's a beast, I love it.

Thanks for the idea Teach.

I tried the 3ml plastic dripper bottle and it was too long. So I cut it down retaining 2CM of the tube. I then took a 3mm disposable pipette and cut off 15mm of the bulb which I then worked onto the opening I had made by cutting the dripper bottle. You need to twist and turn it working as far down the tube as possible.

I checked capacity on the glass bottle which is 1.5 ml. With the modified dripper bottle it is just under 3 ml. almost double the capacity.

This modified bottle screws onto the installed glass bottle top much easier that the glass bottle does & I have no leaks.
I also added an extra o-ring on top of the one already installed where the top metal cone threads onto the bottom unit of the genisis. If you would prefer you could just shorten the dripper bottle a bit and wouldn't need the o-ring.

With this modification I can see me using this Genisis more.

If you try this modification and find you get no vapor I have found I sometimes need to make an adjustment to the airflow by loosening the top cap. I kind of like it as I can adjust the draw this way.

 

[mianker]

Great idea Mianker. I've got some pipettes and 3ml bottles on the way to try this. As I posted earlier in the thread, I dropped my GLV at one point and the glass bottle broke off with the glass threading still in the plastic cap. If that happens, there is virtually no hope of getting the glass out of the cap. I destroyed the plastic cap trying to do that and ended up just putting in a new one. Not difficult, but a PITA if you're out and about with no backup. Plastic is a much better material for this given how often I drop my pv.

Oh, and I just want to reiterate how well the GLV performs - it's a beast, I love it.

Teach deserves the credit as he came up with the 3ml bottle idea. I just found a way to mod a plastic bottle.

Don't forget to try changing the draw by loosening or tightening the top, that is probably the best part of this modification.