Goliath by Youde

[JulesXsmokr]

Any lung hitting device with massive airflow will. I've already went through 30 ml of juice with just 3 nights using the Goliath. Best thing to do is get into DIY, if you haven't yet. Running out of juice doesn't exist for me anymore.

It tastes so good with the Goliath.
I can't imagine buying more nic than I have already, If I ever stop vaping I could extinguish the insect population in my garden with a back pack sprayer for at least 20 years.

If I didn't DIY, I'd be broke with these juice guzzlers.

 

[Jimi D.]

It tastes so good with the Goliath.
I can't imagine buying more nic than I have already, If I ever stop vaping I could extinguish the insect population in my garden with a back pack sprayer for at least 20 years.

If I didn't DIY, I'd be broke with these juice guzzlers.

I know right I have Molinberry Ice Mint in the Goliath right now. Smoothest mint I ever had, with a pleasant cool feeling in my lungs with no harshness. Love this tank man

 

[J-Red045]

Lovee this tank!

 

[Uncle00Jesse]

how in the world are you guys getting 24awg to fit on this deck? I like to use a 3/32 bit and no matter how high or low, close as possible to the deck, the chimney wont go on. is a smaller bit working? i dont want to waste anymore of my anarchist wire figuring this out.

 

[ThunderDan]

Nothing like coming home after a long day at work and finding vapemail a day early. Too bad I'm too tired to build it tonight. Did get the Goliath all washed up before bed at least.

Sent from my Nexus 6 using Tapatalk

 

[madmaxny]

just got mine today. Loving it so far.

 

[J-Red045]

my first build was 2ohms 24ga . massive flavor and smoke . this was for jarhead045 but i forgot to quote .

on april 9th my car was broken into @work . took my head unit stereo and my ipv3 with charging plug and goliath . man anything but the vape .

Thanks man, Im not sure if you were replying to the post i made before or after i edited it because i decided i might get too much flame'age for trying to put fused claptons in the goliath lol, but either way sorry to hear about your car, those guys will get whats coming to them.

P.S. Was that .2 ohms or actual 2 ohms?

 

[jbok]

just got mine today. Loving it so far.

Your SX mini is so sexy!!! I ordered one yesterday and I'm going insane

 

[madmaxny]

Your SX mini is so sexy!!! I ordered one yesterday and I'm going insane

You are gonna love it.

 

[ThunderDan]

Finally built my Goliath tonight, put it off most the day. Just did a simple 26g dual coil. Liking it quite a bit thus far.

Sent from my Nexus 6 using Tapatalk

 

[jbok]

So whats the general consensus, do you think that the Goliath has more airflow? Personally I do but it could be psychological

 

[Jimi D.]

So whats the general consensus, do you think that the Goliath has more airflow? Personally I do but it could be psychological

Compared to the Goblin ? Yeah. That Goblin nearly blows out my eardrums whatever is blocking a clear path.

 

[ThunderDan]

So whats the general consensus, do you think that the Goliath has more airflow? Personally I do but it could be psychological

More airflow than what? A goblin? I think its too close to tell, for me its very similar. FWIW, it seems airier than my goblin with 2.5mm ID coils, and slightly less airy than my goblin with 2mm ID coils.

Either way, the airflow is sufficient enough for me, and a nice easy draw. Really liking no bottom fill, haha, that is my favorite aspect of this RTA, and the reason it will likely see more love than the goblins going forward.

 

[jbok]

More airflow than what? A goblin? I think its too close to tell, for me its very similar. FWIW, it seems airier than my goblin with 2.5mm ID coils, and slightly less airy than my goblin with 2mm ID coils.

Either way, the airflow is sufficient enough for me, and a nice easy draw. Really liking no bottom fill, haha, that is my favorite aspect of this RTA, and the reason it will likely see more love than the goblins going forward.

Yeah.. Sorry compaird to the Goblin. The juice flow is still taking me a bit of getting used to. I'll fill up my tank and forget to open it up until I get a dry hit.

 

[IML8]

Yeah.. Sorry compaird to the Goblin. The juice flow is still taking me a bit of getting used to. I'll fill up my tank and forget to open it up until I get a dry hit.

I hope to get my Goliath some time next week. The plan is to pair it with the IPV 4, which I also hope will ship sometime next week, and a dual nickel/rayon build. Hopefully, the YiHi temp control on the IPV 4 works as well as it's reported to work on the SX Mini M class. I'm thinking this could help prevent me from screwing things up too bad by forgetting to open the juice control back up as well as help reduce juice consumption a little bit *shrugs*. And that's a whole lot of hoping going on in this post. You know the old saying, "The best laid plans of mice and men often go awry."

The adventure continues...,
Nick

 

[ThunderDan]

I hope to get my Goliath some time next week. The plan is to pair it with the IPV 4, which I also hope will ship sometime next week, and a dual nickel/rayon build. Hopefully, the YiHi temp control on the IPV 4 works as well as it's reported to work on the SX Mini M class. I'm thinking this could help prevent me from screwing things up too bad by forgetting to open the juice control back up as well as help reduce juice consumption a little bit *shrugs*. And that's a whole lot of hoping going on in this post. You know the old saying, "The best laid plans of mice and men often go awry."

The adventure continues...,
Nick

You'll want some higher gauge ni200 for that. I was thinking I'd put a nickel build in this, but no way I'll be able to do it with the 28g I have on hand. Going to need at least 30g, maybe 32g to get a spaced nickel build in this tank.

 

[IML8]

Going to need at least 30g, maybe 32g to get a spaced nickel build in this tank.

I have some 30. how many spaced wraps do you think will work with a 2.5 mm diameter? 5? Or is that going to be too big?

 

[ThunderDan]

I have some 30. how many spaced wraps do you think will work with a 2.5 mm diameter? 5? Or is that going to be too big?

You'll probably want to try at least 6 just to get it over .05 ohm. I think it'd fit, but I can't be certain.

 

[xdarktime]

hey, are any of you guys aware of any replacement pyrex tanks that will fit the goliath? i haven't seen any official replacements. it seems a little silly that they wouldn't release one considering the durability of the device is only as strong as its weakest component... and relatively speaking, pyrex is pretty damn weak

 

[jbok]

You'll want some higher gauge ni200 for that. I was thinking I'd put a nickel build in this, but no way I'll be able to do it with the 28g I have on hand. Going to need at least 30g, maybe 32g to get a spaced nickel build in this tank.

You can't do a micro/macro wrap with ni200? Standard wraps only?