Goliath by Youde

[lyspaere]

How many of you see actual threading where the chimney flue meets with the top cap? Not just the o-ring that's supposed to be be completely enveloped by the joint there, but the threading for the chimney tube...

Does anyone else have a chimney that seems like it doesn't fit? It's like the center section isn't long enough... It's not leaking or anything but it kinda looks unattractive with all the chimney parts not screwing flush with each other.

FWIW, mine is the same way regarding the chimney, can see the black o-ring, and maybe a thread depending on how tight I get it.

At least I'm not the only one, even if I asked that same question days ago


[emoji10][emoji100] [emoji709]

 

[coustain]

Thanks. I read on Steam Engine that it's sweet spot is around .35 I think it was. My usual build is .25 but I'll most likely end up rebuilding it to the sweet spot for the Sigelei.

I'd read of a redditor who used their Goliath at .27. Can it handle that? What's the max wattage that you would put through the Goliath? And does it have a limit?

Sorry about all the answer and thanks in advance.

I'm running mine on Nichrome at .16 on my SX Mini M Class. At 30 watts it's a smooth warm vape.

 

[ThunderDan]

I'm running mine on Nichrome at .16 on my SX Mini M Class. At 30 watts it's a smooth warm vape.

That has step down, and you're only running it at 30w.

I think when most people ask if a RTA can handle *insert subohm resistance here* for a RTA they are asking about using it with a mech.

At least that is the only reason I can think why they would ask. Otherwise just turn your wattage down / build a higher resistance coil.

 

[coustain]

I have, used 28g ni200 2.4mm ID 11 wraps.

I got a build working finally. 30G 10 wraps and I set them up diagonally. Came in at .086 ohms. This makes for a nice warm vape [emoji3]


Sent from my iPhablet using Tapatalk

 

[Cacique]

I asked about the resistance and the wattage just to see it's capabilities. I just started using my sigelei 150 today and I'm using it at 70 watts, so I'd like something that would be able to handle at least up to 100 watts without any issues. At least to around 80 would be nice. In a mech I run around .23-.25, so I'm just trying to figure out what would work best. Since my mech is a hybrid I would probably only use it on the Sigelei. This one stood out the most but that Cthulu looks nice.

 

[ThunderDan]

I asked about the resistance and the wattage just to see it's capabilities. I just started using my sigelei 150 today and I'm using it at 70 watts, so I'd like something that would be able to handle at least up to 100 watts without any issues. At least to around 80 would be nice. In a mech I run around .23-.25, so I'm just trying to figure out what would work best. Since my mech is a hybrid I would probably only use it on the Sigelei. This one stood out the most but that Cthulu looks nice.

Gotcha, yeah, for high wattage the cthulhu RTA is probably a better option IMO. Larger deck for larger coils and larger wicks. More airflow presumably. Larger airflow on the deck at least.

This past weekend I put a 26g kanthal build in my goliath, 2mm ID, 8 wraps iirc, and I think it'd be hard pressed to keep up at 50w. I've been using it around 35-40w.

I will try fitting some larger ID 24g coils in this just for fun, and throw 50w+ at it to see how it goes.

 

[Cacique]

Thanks for the advice. I'll keep an eye out for the Cthulu and the Goliath v2. Interested to see how that one turns out.

 

[coustain]

This is the build. It is amazing and wicks great! 2mm ID, 30AWG Ni200, 10 spaced wraps, diagonal setup.


Sent from my iPhablet using Tapatalk

 

[ihavethanutz]

Has anyone had leaking from the bottom of the 510 base? I can't figure out where the leak is coming from, I've play with the juice control to adjust but am still having this issue. I thought it was condensation but I doubt it

 

[coustain]

Has anyone had leaking from the bottom of the 510 base? I can't figure out where the leak is coming from, I've play with the juice control to adjust but am still having this issue. I thought it was condensation but I doubt itView attachment 454160

I get that from my Goblin when the wicks are too close to the airflow holes. If I wash it and dry it and do a fresh build with new wick, it clears right up.


Sent from my iPhablet using Tapatalk

 

[ThunderDan]

I get that from my Goblin when the wicks are too close to the airflow holes. If I wash it and dry it and do a fresh build with new wick, it clears right up.


Sent from my iPhablet using Tapatalk

Don't you know its leaking from the fill screw on your goblin. /sarcasm

 

[zer0zer01n]

Has anyone had leaking from the bottom of the 510 base? I can't figure out where the leak is coming from, I've play with the juice control to adjust but am still having this issue. I thought it was condensation but I doubt itView attachment 454160

For me, it leaks from the residual in the base if left on its side, even after I close off the juice control. And then if there's the slightest gap between the base and the mod you have it on, it'll leak out of the air holes and down the base and collect underneath. That's been my experience with it anyways, so I've learned to adjust the air flow before screwing it snug onto my box. YMMV

 

[ThunderDan]

Also make sure your wicks aren't touch the airflow holes on the base.

 

[ihavethanutz]

thanks for the tips ill give it a try

 

[scooterholic]

Has anyone had leaking from the bottom of the 510 base? I can't figure out where the leak is coming from, I've play with the juice control to adjust but am still having this issue. I thought it was condensation but I doubt itView attachment 454160

I've had the base start to unscrew from turning the juice control on mine, that could be a big leak problem if turned far enough.

 

[heateris]

my Goliath form Gear Beast has made it into the country. Should have it in a few days at most.


Sent from my iPhone using Tapatalk

 

[Jimi D.]

That's weird. That 510 pin is silver instead of copper. Here we go with the cutting corners baloney.

 

[Jimi D.]

Jufren High Quality Goliath Rebuildable Tank Atomizer Goliath Rta - Buy Goliath Rta,Goliath Rta Atomizer,Goliath Rta Product on Alibaba.com

Hmmm Is this a cloned Goliath ?

 

[Mike 586]

Jufren High Quality Goliath Rebuildable Tank Atomizer Goliath Rta - Buy Goliath Rta,Goliath Rta Atomizer,Goliath Rta Product on Alibaba.com
Hmmm Is this a cloned Goliath ?

Could be a clone, could be that they changed the screw for some reason, could also be a bad O-ring. In either case, I'd try making sure the 510 screw is properly snugged up and making sure all the O-rings are in good shape.

 

[ThunderDan]

That's weird. That 510 pin is silver instead of copper. Here we go with the cutting corners baloney.

I don't think they did that to cut corners, but rather to appease paranoid vapers that don't like exposed copper in their air intake.