GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 2
- Thread starter perseas
- Start date
- th_trl_thread_readers 0
- Status
quick question, I just saw a pict of the GP Paps X 1.5 and the GP Paps V3 they look to be the same diameter, what are the differences? Looks like the button is different? Thanks. Oh what would be the advantages/ disadvantages of either?
Chadsmo, out of curiosity, is that a v2 Original Origen?
Sadly it's a V1.
http://www.vapourart.com/en/product/gp-paps-18500-ss-edition-version-3
http://www.vapourart.com/en/product/gp-paps-x-version-15
Hmm, you reminded me that I need to open a GP PAPS X dedicated thread, I will do it the next days. Take a look at the links to understand the differences.
Oh, thanks. In the photos I just saw they look like they were both the same in diameter. I need 23mm
It's all good. I like the V1 just fine. I can't really afford any more vape gear right now but I've been eyeing a Zenith or a Quasar as a future purchase.
I'm not into chasing clouds, I need flavor and throat hit, those are more important to me. It isn't easy getting throat hit from 6mg, but I chain vape so I prefer the lower nicotine.
Try vaping at 55+ watts , all the throat hit you can handle and more lol.
Just got my Heron for my Paps X v1.5.
Put it together and just want to confirm i did it right.
Screwed on the Paps X converter on the bottom of the Heron. Removed the top cap from my Paps X. Screwed Heron on top of the Paps X.
So i dont need the top cap of the Paps X with the Heron? Can the Heron be used on other mods?
Apologize in advance for my newbish questions.
Put it together and just want to confirm i did it right.
Screwed on the Paps X converter on the bottom of the Heron. Removed the top cap from my Paps X. Screwed Heron on top of the Paps X.
So i dont need the top cap of the Paps X with the Heron? Can the Heron be used on other mods?
Apologize in advance for my newbish questions.
Last edited:
Perseas - the GP PAPS 18500 SS Edition version 3 page at Vapourart has a link to the serial numbers, but states "You can register your GP PAPS® X SERIAL NUMBERS here".
I was never a fan of dripping till I got the quasar. I love mine and use it all the time when I'm not out and about, in which case I was taking a KFL with me till now, the heron is definitely and upgrade.
Sent from my SM-N900T using Tapatalk
I have been a dripper since my first upgrade. You just get used to the whole routine of it and eventually it became almost second nature.
With Perseas blessing, I was honored and delighted to receive and test the prototype version of the upcoming GP Spheroid V3 and am excited to share a few pictures and thoughts.
First of all, I tip my hat to Perseas for listening to the many GP Fans that loved the Spheroid but, wanted a bit more airflow to go along with it. Many including myself would rate the Spheroid as the top atomizer in our vaping world. Now, the rest that needed more air will make it theirs.
At first glance, you will notice there are two very adequate air holes on the exterior base. I will tell you that with the new edition of the air holes there is plenty of air circulating up through the chimney to keep lung hitters alike with a permanent smile.
Breaking the Spheroid down and comparatively inspecting it with the previous version, I noticed a few changes. One of them was the taller air chamber rise on the top of the base under the coil and wick. I see benefit in that any juice on the deck from over wicking or over filling will less likely drain into the base. I also suspect being closer to the coil will allow a better flavored vape(this seems impossible as it is awesome already).
I remember Perseas often instructing builders to keep their coil/wick 1mm-1.5mm from the center hole for a better experience.
When I received the V3 I immediately took it apart to inspect...I struggled with the top cap as it would not unscrew. Finally, after staring at it and willing it off it hit me. It is press fitted with an oring! I must say it is a PERFECT fit! I love it!
I find it is quite easy to push it off from the bottom bell. The o-ring size is perfect and the tolerance fit could not be better. Most of us Spheroid lovers know that on the previous version the top cap often took some work to unscrew. Now it installs and removes like a dream.
The vapor production is incredible and the airflow is amazing. I can not wait for the release.
I, once again am ever impressed by Team GP as all of their devices move forward in advanced design. I also find it very refreshing that Perseas cares enough to always listen to his fans trying to satisfy every group of vapors and he nails it every time.
GP you nailed it with the V3. Thank you for thinking of us. Love you Brother!
*Note - the prototype shown may not depict the final design or release. Photos are property of Idaholandho and GP.
Nice pics and very nice write up
conclusions made for today:
- I need an ohm reader....was using my mvp2 for the spheroid
- I need at least two Herons....one to house my most successful build and one to experiment on
- I need to upgrade my v2 spheroid to v3
- I need a v3 350 tube
- I love my Heron #150....i named it Buck Fifty
- I need an ohm reader....was using my mvp2 for the spheroid
- I need at least two Herons....one to house my most successful build and one to experiment on
- I need to upgrade my v2 spheroid to v3
- I need a v3 350 tube
- I love my Heron #150....i named it Buck Fifty
Congrats! Take a look at some builds : http://www.e-cigarette-forum.com/fo...tifications-tips-tricks-updates-thread-9.html
Put it together and just want to confirm i did it right.
Screwed on the Paps X converter on the bottom of the Heron. Removed the top cap from my Paps X. Screwed Heron on top of the Paps X.
So i dont need the top cap of the Paps X with the Heron? Can the Heron be used on other mods?
Apologize in advance for my newbish questions.
You don't need it with the X and yes, Heron can be used with any 22 mm mod with a 20x1 threading. And don't apologise, you need to know
- Status
Similar threads
- Locked
- Sticky
- Locked
