GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 3

[cliffy15]

I started my vaping journey on 10/2/2012. My goal, was to find that 'happy place', where vaping was everything that vaping could be. That place, where I would be content to stay for life. I didn't immediately find that place. It took me three steps. When I experienced VapourArt, the GP Family, and the GP X, I immediately knew I had found my 'happy place'. My journey was complete. I hope to vape my Xs, and only my Xs, until the end of my time.


I will forever cherish the love I experienced in this room. Perseas, my dear friend, you have a very special place in my heart. And, I hope you continue to be a part of my life forever.


Sending love, hugs and smiles to Perseas, and my GP Family.


And, yes Perseas, "We had a blast!".

I'm with Cucco on this. I even started vaping around the same time. my first GP purchase was late in 2013 and GP has been my go-to ever since.

I don't know what the future will bring but I'm hoping for the best for GP and for the industry as a whole.

Thanks, P, for all that you've done for us (and hopefully will continue to do). and thanks to this forum and the people in it. I'd like to think that I've met a few friends/comrades here and once again I'm on the bench waiting for news.

until then, I'm hoarding my GP gear, looking for spares, and wishing I could prepay for the Heron v3.

ps - and if there are any ever v4s (even just the 18650 tubes) I guess I'll going to have to jump on those, too! I have one extra switch that needs a home

 

[paladinx]

Oh wow, thanks for the heads up. Last time I checked when I put up that post it was 160 dollars with shipping.. Now all of the sudden its half price.. Hilarious.

 

[Firestorm]

Hey, any of you guys a GP dripper pro users? I have one that is brand new, I tried it once but I can tell right away that its an amazing dripper for those who lung hit or even restricted lung. The air system seems setup for this kind of build. For a guy like me who was an original designed spheroid guy... It doesn't really fit my vape style.. I did put it up on the market place here, but I am wondering if anyone here uses the GP dripper pro but also uses very tight airflow and m2l.. If so is there a particular setup you guys use... When I tried it, it was very harsh ... but with lower nic and a more open airflow it vaped great..

I haven't yet tried the GP Dripper Pro, but I have seen your post in the Classifieds. If you're looking to part with it, you may want to check out the current price on Vapourart's website and adjust your price accordingly (at least until they sell out).

 

[paladinx]

Thanks for the heads up.. When I put up that post they were charging around 160 dollars with shipping.. Its unfortunate no one told me on the thread.. Now I feel stupid I thought I was giving people a deal.

 

[qorax]

-deleted-
Reason: Unwarranted post

 

[paladinx]

Wow , They must have just changed their price.. I just wanted to use the money to buy a spheroid since that fits my vape style more. Had no clue they decided to cut the price in half... I hope they have a sale on the spheroid as well I have to check out their site again. Hell maybe I will change the post to a trade. I just know another person would love the atty.. Its perfect for lung hitters and restricted lung hitters.. Great flavor.. its a solid atty.. I just have a weird way of vaping.. Im the type who can use a JUUL and be happy.

Thanks for the info guys
Regards

 

[ToolmanTexas]

Wow , They must have just changed their price.. I just wanted to use the money to buy a spheroid since that fits my vape style more. Had no clue they decided to cut the price in half... I hope they have a sale on the spheroid as well I have to check out their site again. Hell maybe I will change the post to a trade. I just know another person would love the atty.. Its perfect for lung hitters and restricted lung hitters.. Great flavor.. its a solid atty.. I just have a weird way of vaping.. Im the type who can use a JUUL and be happy.

Thanks for the info guys
Regards

You aren't alone...Tons of tight draw mtl peeps out here... I traded a Spheroid v4 for a v3

 

[Zutankhamun]

You aren't alone...Tons of tight draw mtl peeps out here... I traded a Spheroid v4 for a v3

Hi ToolmanTexas. Did you try the reducers on it? Was it the same as trying to turn the kfun 5 into an mtl with reducers? Not as good imo as the kfun lite imo?
I kinda want the v3 but I don't like it without the insignia and I don't like the bottom airflow.
Will it work on every mod or do you need the sort of topcap like on the Paps, with grooves for bottom airflow? Thanks

 

[ToolmanTexas]

Hi ToolmanTexas. Did you try the reducers on it? Was it the same as trying to turn the kfun 5 into an mtl with reducers? Not as good imo as the kfun lite imo?
I kinda want the v3 but I don't like it without the insignia and I don't like the bottom airflow.
Will it work on every mod or do you need the sort of topcap like on the Paps, with grooves for bottom airflow? Thanks

V3 does have bottom airflow and needs a mod w grooves imo... Top 3 atty for me along w kfl and erlkonigin nano

 

[paladinx]

same here i wasn't into the V4 as much.. but when i had it it didn't have the airflow reducer.. I want to try it with that... The flavor on the V4 was lacking for me compared to the V3.. The flavor in the GP dripper is top notch but u need an open airflow to get it.. M2L need small airflow under the coil and a small chamber otherwise you lose something.

 

[ToolmanTexas]

M2L need small airflow under the coil and a small chamber otherwise you lose something.

My mantra right there!

 

[Zutankhamun]

Thanks ok. So I use my paps most of the time nowadays but if in too much of a rush to check with a dmm and check resistance I just throw things on a reg and go.
But the spheroid v3 wouldn't work on these mods?

 

[ToolmanTexas]

Thanks ok. So I use my paps most of the time nowadays but if in too much of a rush to check with a dmm and check resistance I just throw things on a reg and go.
But the spheroid v3 wouldn't work on these mods?
View attachment 641631

I don't believe so. Below is MY perfect reg setup for V3, Athena Envy17:

For mech then go with a MicroStick, authentic is only $50 on Chel's site, clone is $20 on Vaporider and you get a micro atty with it:

 

[Zutankhamun]

Looking good.
Not really fond of that idea though. I want everything to just work no matter. Shame. I mtl and I'm not keen on the idea of businesses converting solely to larger airflow.
I know it makes sense for the business but I just wish firms had brought out maybe 2 attys, one dedicated to mtl'ers.
I'm a very, very recent fan of gp and for the great business, complete enjoyment I get from the V4 and Perseas' and Miroslav's (the only guys I've spoken with) customer service is the reason I will buy the (I so hope so) Heron v3 and anything else gp do.
I'm not even a dripper but I got the dripper from them just because.

What do you guys think. Will GP have another vapourday and have a v3 Heron?

Also, anybody know of anywhere selling new Heron 1/1.5 etc...?

 

[ToolmanTexas]

Looking good.
Not really fond of that idea though. I want everything to just work no matter.

I haven't found any like that yet everything takes a little work and finesse of some type.

The Spheroid v3 for me is absolutely worth having a few mods that provide air for bottom airflow atties. Provari is a great match as well as tons of mechs. The thing is a flavor mtl beast and absolutely will not leak. I have a 4 of them in the collection and am so thankful!

 

[Firestorm]

I see that someone finally purchased the GP PAPS X Ti Edition version 1.5. What a great deal for someone who was looking to score one.

 

[pt91]

You aren't alone...Tons of tight draw mtl peeps out here... I traded a Spheroid v4 for a v3

I always wanted to try the v4. My version is 2 I think. Which mine had more adaptability of air.

 

[ToolmanTexas]

I always wanted to try the v4. My version is 2 I think. Which mine had more adaptability of air.

If I had another V4 I'd trade ya

 

[pt91]

If I had another V4 I'd trade ya

would gladly do that

 

[Zutankhamun]

Is the Heron 1.5 an updated version of the Heron? With the cotton topper and things?