Heather's Heavenly Vapes - THE BIG THREAD (Part 2)

Status
Not open for further replies.
Well, as luck would have it, I've got 28, 32 and 34, but no 30. I'll try it with 28 and see how that works. Will order some 30 or stop by a local vape shop and see if they have any. But I assume 28 will work ok.

I use 32 in mine with just a regular coil and it works fine. I have some 30 and 28 but I have no tinkering energy lately. Maybe tomorrow since it looks to be a snow day. Son's school is closed and my work is delayed but we'll see...I doubt I go in. I'm such a slacker...I took a vacation day today for my at-home spa day which was a success! I needed some me time.
 

retic1959

Vaping Master
ECF Veteran
  • Jul 28, 2013
    6,735
    28,858
    New Orleans , Louisiana
    I'm a 28 user, and yes, it works just fine.. Sent from my IdeaTab S6000-F using Tapatalk
    I'm figuring the 28ga will last a little longer than the 30ga , that's the main reason I bought it , 28ga should go few a few more rewicking sessions with the cotton , Bronze uses silica so he doesn't concern himself with rewicking like someone that uses cotton .
     

    Dusty_D

    Original Guru
    Senior Moderator
    Supporting Member
    ECF Veteran
    Verified Member
    Jul 22, 2010
    16,228
    47,678
    53
    Toronto, Canada
    dustysfoodieadventures.blogspot.ca
    Yes, Maestro.

    I have a 1.5 ohm coil with 4.3 volts, which is technically 12.3 watts, I believe.



    Roaring via Tapatalk

    I'm running a 1.7 at 4.2.. 10.3 w

    I took it up to 11 for about 10 mins, and it was a bit much..

    What coil/wick combo you running? No dry hits? or do you have to keep taking primer puffs to keep it juiced up?
     

    Pappy

    Vaping Master
    ECF Veteran
    Verified Member
    May 15, 2012
    3,835
    14,440
    Dallas, Tx
    I use 32 in mine with just a regular coil and it works fine. I have some 30 and 28 but I have no tinkering energy lately. Maybe tomorrow since it looks to be a snow day. Son's school is closed and my work is delayed but we'll see...I doubt I go in. I'm such a slacker...I took a vacation day today for my at-home spa day which was a success! I needed some me time.

    I've watched some videos on building the microcoils and it doesn't look very hard. I figure it will take 2 or 3 to get the hang of it. At least that's my hope because I don't like fiddling with that kind of stuff. I just want things to work.

    Glad your at-home spa day was a success.
     

    Hulamoon

    Vaping Master
    ECF Veteran
    Verified Member
    May 6, 2012
    8,636
    43,384
    65
    Waikiki Hawaii
    Mix a little raw Maple eh to Huntsman. Swooooon


    Bronze,

    I have my Gaia and Maple, Eh? cap opened and steeping since Friday morning. Have you delved into either yet?

    My nose test on Gaia tells me it is a long-steeper, I was thinking at least 10 days. But the Maple one is begging me to try it...
     

    Hulamoon

    Vaping Master
    ECF Veteran
    Verified Member
    May 6, 2012
    8,636
    43,384
    65
    Waikiki Hawaii
    Me standing at the door in my underwear has the same effect.

    I have a couple of Glocks. They will do in a pinch. But my favorite home protection device is my Mossberg 500 12 gauge 6-Shot. It is a nice tactical pump shotgun with adjustable stock. Simply actuating the pump is enough to frighten any but the most determined intruders.
     

    Hulamoon

    Vaping Master
    ECF Veteran
    Verified Member
    May 6, 2012
    8,636
    43,384
    65
    Waikiki Hawaii
    Dark Horse on Steroids? Good! I always found DH a bit on the wuzzy side myself. I have Gaia sitting here steeping, so I'm looking forward to it.

    Dark Horse on steroids :) i love the stuff even more so than Legend. My initial order of it is just about gone and it didn't get any time to steep. Going to re up a couple big bottles soon

    Tapatalked from my LG-G2
     

    retic1959

    Vaping Master
    ECF Veteran
  • Jul 28, 2013
    6,735
    28,858
    New Orleans , Louisiana
    I've watched some videos on building the microcoils and it doesn't look very hard. I figure it will take 2 or 3 to get the hang of it. At least that's my hope because I don't like fiddling with that kind of stuff. I just want things to work. Glad your at-home spa day was a success.
    It's not hard Pappy you'll get the hang of it in no time , once you got it built it's pretty much up to you as far as when you want to rebuild it and most of us can troubleshoot for you but I'm not anticipating you needing that , the 3.1's have been a lot less of a headache than the protanks and evods were and easier to rebuild too , you have a lot more space to work in as opposed to rebuilding clearo heads , that plus the flavor thes atty's produce , you'll see .
     

    PapawBrett

    Retired
    ECF Veteran
    Verified Member
    Jul 16, 2012
    8,761
    66,518
    Monroe NC
    That sounds like a lot of juice but I'd hate to know how much I actually have if I total up all the bottles. I like variety so just have several 30ml and 10ml bottles:laugh:



    BINGO ! :) 25 bottles, ranging from 10ml to 50ml, with no repeats. 12 HHV, 8 HB, 3 NET. and 2 AltCig.

    Variety IS the Spice of Life !
     

    Hulamoon

    Vaping Master
    ECF Veteran
    Verified Member
    May 6, 2012
    8,636
    43,384
    65
    Waikiki Hawaii
    Smart idea Ray - this one works for me at home

    keepout.jpg


    I've never needed my weapon(s) for home defense and hope I never do.

    Or maybe those NRA stickers on my truck outside serve as warning enough. :)
     

    EddardinWinter

    The Philosopher Who Rides
    ECF Veteran
    Verified Member
    Jun 13, 2012
    8,866
    28,169
    Richmond, Va
    I'm running a 1.7 at 4.2.. 10.3 w

    I took it up to 11 for about 10 mins, and it was a bit much..

    What coil/wick combo you running? No dry hits? or do you have to keep taking primer puffs to keep it juiced up?


    Vertical coil (RiP style), cotton wick.

    No primer puffs.

    100% great vapor.



    Roaring via Tapatalk
     
    Status
    Not open for further replies.

    Users who are viewing this thread