Hey Yeah, I heard you got a nice x-mass present from Bridget. So Cool of her to PIF! Waiting for your take on the Orange Blossom Honey.
Heather's Heavenly Vapes - THE BIG THREAD (Part 5)
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
Hey Yeah, I heard you got a nice x-mass present from Bridget. So Cool of her to PIF! Waiting for your take on the Orange Blossom Honey.
I'm glad you posted, because I was starting to worry about you.
Aw, sorry, I didn't mean to get y'all fretting 'bout me. Say. last I read you were thinking about getting Rose V2 or something. How'd that turn out? I wanted to tell you to think twice about the Rose, it's a nice tank when set up right, just a bugger wicking and re-wicking since the coil is recessed in the ceramic cup. I followed Retic's advice and use a twisted 30g, 1.3 ohm in it which is a lot sturdier than single strand coil. But yet it's still... The Kayfuns are sooooo much easier to manage.
Right now the orange is predominant followed by the honey , the tobacco's not there yet so I'm gonna give it time . I was really interested in this one because BK and I made a batch of mead with orange blossom honey that was fricking delicious . Hopefully it balances out a little more .
IDK, I thought the small (6ml) sample I got was pretty freaking good and I didn't age it at all - it did take almost two weeks to get here. How old is the one you got?
I'm used to mine now and building and rewicking don't present me with any problems . I'm running 24 & 26ga 3mm macros around 6 wraps , the shorter , thicker coils leave more space to work in so it goes quickly with a pair of hemostats . Definitely a learning curve starting out though . LA , KK and I are waiting on Aqua V2's right now , should be fun .
Well I decided I needed practice making coils. LOL. I am just pitiful. The first one I made looked good. Longer legs on them are a must, if I am going to be able to get them on there nice and secure. The first one I got it too tight. So when I pulled it up, the wire snapped. This is after fiddling with it. Well, I decided to try another. This coil looked pretty good. I got it locked in all pretty. I was starting to get proud of myself. Then I realized I had locked in the wrong leg on one of the post wires. Things got a little hairy, but I pulled it off. I am going to practice more.
I think I am caught up on what I must have for now. I bought wire, the Kayfun o ring kit, 2 18650 batteries, blunt tip bottles-soft squeeze 5 pack, Aqua 2. I locally bought a couple of drill bits, and a small cheap precision screwdriver kit, some o rings. Doesn't sound like much, but it was. The juice was AVE Blend 4 (I like it, but it must steep for a good while for me first...and two sample bottles from there) I already got my HHV order that I already mentioned. Oh, and my Koh Gen Do came in too. Dusty already shipped the Panzer/Magma, and Lori is sending me a couple of Kayfun's with a shiny new coil installed. I am very pleased to say the least.
I have been trying to learn about mech mods safety, and battery safety, ohms law and all that complicated stuff. Mercy, I think my brain is in overload.
I think I am caught up on what I must have for now. I bought wire, the Kayfun o ring kit, 2 18650 batteries, blunt tip bottles-soft squeeze 5 pack, Aqua 2. I locally bought a couple of drill bits, and a small cheap precision screwdriver kit, some o rings. Doesn't sound like much, but it was. The juice was AVE Blend 4 (I like it, but it must steep for a good while for me first...and two sample bottles from there) I already got my HHV order that I already mentioned. Oh, and my Koh Gen Do came in too. Dusty already shipped the Panzer/Magma, and Lori is sending me a couple of Kayfun's with a shiny new coil installed. I am very pleased to say the least.
I have been trying to learn about mech mods safety, and battery safety, ohms law and all that complicated stuff. Mercy, I think my brain is in overload.
I'm used to mine now and building and rewicking don't present me with any problems . I'm running 24 & 26ga 3mm macros around 6 wraps , the shorter , thicker coils leave more space to work in so it goes quickly with a pair of hemostats . Definitely a learning curve starting out though . LA , KK and I are waiting on Aqua V2's right now , should be fun .
What do you use the hemo's for?
Well I decided I needed practice making coils. LOL. I am just pitiful. The first one I made looked good. Longer legs on them are a must, if I am going to be able to get them on there nice and secure. The first one I got it too tight. So when I pulled it up, the wire snapped. This is after fiddling with it. Well, I decided to try another. This coil looked pretty good. I got it locked in all pretty. I was starting to get proud of myself. Then I realized I had locked in the wrong leg on one of the post wires. Things got a little hairy, but I pulled it off. I am going to practice more.
I think I am caught up on what I must have for now. I bought wire, the Kayfun o ring kit, 2 18650 batteries, blunt tip bottles-soft squeeze 5 pack, Aqua 2. I locally bought a couple of drill bits, and a small cheap precision screwdriver kit, some o rings. Doesn't sound like much, but it was. The juice was AVE Blend 4 (I like it, but it must steep for a good while for me first...and two sample bottles from there) I already got my HHV order that I already mentioned. Oh, and my Koh Gen Do came in too. Dusty already shipped the Panzer/Magma, and Lori is sending me a couple of Kayfun's with a shiny new coil installed. I am very pleased to say the least.
I have been trying to learn about mech mods safety, and battery safety, ohms law and all that complicated stuff. Mercy, I think my brain is in overload.
Progress!!!!
It's not hard as long as you know what the continuous amp rating of your batteries is and never exceed them . Starting out I'd suggest you leave yourself a 25% safety cushion , ie if your battery is rated for 10 amps continuous don't exceed 7.5 amps with your build . This calculater will help . You know your battery is at 4.2 volts with a fresh charge and you should know your resistance , put those numbers in and hit calculate and it will tell you how many amps you're drawing from the battery and how many watts you're applying to the coil . Ohm's Law CalculatorWell I decided I needed practice making coils. LOL. I am just pitiful. The first one I made looked good. Longer legs on them are a must, if I am going to be able to get them on there nice and secure. The first one I got it too tight. So when I pulled it up, the wire snapped. This is after fiddling with it. Well, I decided to try another. This coil looked pretty good. I got it locked in all pretty. I was starting to get proud of myself. Then I realized I had locked in the wrong leg on one of the post wires. Things got a little hairy, but I pulled it off. I am going to practice more. I think I am caught up on what I must have for now. I bought wire, the Kayfun o ring kit, 2 18650 batteries, blunt tip bottles-soft squeeze 5 pack, Aqua 2. I locally bought a couple of drill bits, and a small cheap precision screwdriver kit, some o rings. Doesn't sound like much, but it was. The juice was AVE Blend 4 (I like it, but it must steep for a good while for me first...and two sample bottles from there) I already got my HHV order that I already mentioned. Oh, and my Koh Gen Do came in too. Dusty already shipped the Panzer/Magma, and Lori is sending me a couple of Kayfun's with a shiny new coil installed. I am very pleased to say the least.
I'm used to mine now and building and rewicking don't present me with any problems . I'm running 24 & 26ga 3mm macros around 6 wraps , the shorter , thicker coils leave more space to work in so it goes quickly with a pair of hemostats . Definitely a learning curve starting out though . LA , KK and I are waiting on Aqua V2's right now , should be fun .
They look pretty cool, but how do you fill 'em?
Pulling the wick through the coil , tweezers would work fine too . The Rose is routine for me now , a couple of minutes and I'm done , almost as quick as a Kayfun .
LOL, talk about short term memory loss....I don't remember what it refers to.
Good afternoon Army!
I have been awake for a while but catching up on quite a few things.
You NOLA peeps should check out the Call to Action banner..... The places that these types of bills get turned down are because people show up and are vocal about not restricting vaping. Just sayin'
There is a bulletin point list that you can follow here: CASAA: New Orleans, Louisiana Call to Action: Ordinance would Ban Vaping Wherever Smoking is Prohibited
I have been awake for a while but catching up on quite a few things.
You NOLA peeps should check out the Call to Action banner..... The places that these types of bills get turned down are because people show up and are vocal about not restricting vaping. Just sayin'
There is a bulletin point list that you can follow here: CASAA: New Orleans, Louisiana Call to Action: Ordinance would Ban Vaping Wherever Smoking is Prohibited
Unscrew the base section and fill, either with needle bottle or long tip bottle.
Kelly's name on the list..
Thanks Dusty, us ol' codgers need a kick start once in a while.
- Status
Similar threads
- Locked
- Locked
