vape Muppet" data-source="post: 21837897" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">Thanksvape Muppet said:
Sent from my SM-G960U using Tapatalk
High end RTAs
- Thread starter Yonjuro
- Start date
- th_trl_thread_readers 0
- Status
Sent from my SM-G960U using Tapatalk
It finally came in. I set it up using 7 wraps of 316lss 2.5 mm .70 ohm using temp control . 50/50 liquid w cottonmans mav X
It has great flavor, with the vapor being on the dry side. The flavors seem to seperate well. I set up the air ring to half of both holes, that is were it is giving me the combo of what I like so far. The atomizer seems to prefer air from both holes.
It has great flavor, with the vapor being on the dry side. The flavors seem to seperate well. I set up the air ring to half of both holes, that is were it is giving me the combo of what I like so far. The atomizer seems to prefer air from both holes.
Nice to see someone else using it!
I use X, original Mavaton's Select Gold (natural oils removed) and the Carolina Blend (natural oils removed). I've been using them for quite some time. Best I have ever used. I get a solid 10 days with no loss or muting of flavor. It lasts and lasts, for me.
Last edited:
Nice to see someone else using it!
I use X, original Mavaton's Select Gold (natural oils removed) and the Carolina Blend (natural oils removed). I've been using them for quite some time. Best I have ever used. I get a solid 10 days with no loss or muting of flavor. It lasts and lasts.
I ah e only tried and use the Mavaton X and there was no turning back for me. Not tempted to try anything else. The cotton does not add any flavor that I can notice. There is some waste and it is pricey, but smokes are more expensive.....
What kind of liquid do you vape? I still have to change often with sweet tobaccos .
The other two cottons I mentioned are lower costing than Mavaton X and perform just as well with every juice I have used. IMO there is no break-in time either. Right, doesn't add any kind of flavor.
I DIY my own juice and enjoy many flavors. I regularly vape a vanilla-cream and also a creamy butterscotch blend and all three cottons last ten days for me. I was never into tobaccos.
Just curious...have you ever tried rayon with your tobaccos? Are you vaping NET's?
Never tried rayon, only Japanese and cotton bacon. Most my tobaccos are synthetic and a net every now and then. I also like custards and some not too sweet fruit type as palate cleansers.
Glad your tank came in....I only use rayon and have enough for 20 years probably, if you would like to try, I can send you some
Sent from my SM-G960U using Tapatalk
I often think vapers get a seriously obsessed with kit but even I have to admit that is one awesome looking set up. Just awesome.
I'm digging mine however with the 4mm opening itd just to loose for me to get a restricted lung hit from so I spoke to the Atmizoo guys and they told me to wait about 2 weeks to order my extension kit so I could pick up the extension and the new inserts at the same time and save on shipping . Really awesome group of people over there and they really care about there customers
I've been looking at this but am suspect of RTAs that claim to do everything. Is the MTL true or a good loose MTL (or both)? In other words, does it perform well in all it's claimed categories?
It does both quite well however as it is stock for me it performs best as a MTL tank. It has 1mm, 1.2mm , 1.5mm and 1.8mm inserts and with the 1.2mm insert and the chimney restricter in the vape and throat hit quality is very VERY good. Now the restricted direct lung really doesn't come into play until you remove the air insert revealing a 4mm hole. Now I have vaped like this with and without the chimney insert but 4mm is just a bit to airy for me that being said the flavor was awesome and the airflow was smooth just a tad to much air for me.
The really cool thing about this though is me and a couple others spoke to the Atmizoo team about our thoughts on the restricted lung portion of the atomizer and they immediately went to work to create some different insert options which are 2.2mm , 2.5mm 2.8mm and 3mm or something very close to that. This blew my freaking mind as it's so amazing to see a company listen to its customers ideas and criticisms and take immediate action other companies need take note.
With a 2.2mm or 2.5mm insert in the Tripod I'm thinking it's going to be amazing.
Last edited:
I'm not sure if they have any plans on smaller inserts but I can tell you that the inserts run on the tight side the 1.2mm feel closer to a 1mm for me
Hey, thx, that was really helpful, especially the measurements. And a big thx for contacting Atmizoo with suggestions. I think I want this. Can you tell me more about the flavor? I generally use RDAs to test my flavors when mixing. Do you get good flavor balance where you can distinguish each component of your mix?
The negative meaning what? Many moving parts? Is it a pain to take apart and clean?.........
Hmm, the Creek looks interesting. Can you compare to the Hadaly for flavor? I like how they've directed the air underneath the coil, similar to my little Etna with the inserts.My Prime's bring the flavor in spades for the types of juice I prefer.
Looking at getting the Prime nozzle kit so I can see for myself how they may change flavor.
I gave my K5 (+ accessories/parts) to my brother, in trade, as the K5 fit his vape style. Open and airy. We switch gear between us in order to try different RTA/RDA atty's + mods. Works out nicely. He is into the facebook groups and acquires some nice HQ gear that I eventually get try lol.
Funny, recently he brought over an EVM by Estoque Mods. Very, very nice kit. At first he did not want me touching it cause he knows me all too well. In that I would want to keep it.
He and many others here finally got me into squonk-land. My new kit...
View attachment 819651
The Atmizzo Creek brings big bold flavor. For flavor it put my NarDA to shame. I like mine so much that I have another on its way. Atmizzo is a company out of Greece that I think kind of flies under the radar. They have excellent reviews for the Creek and the Keras RTA. The Keras RTA can also take drop in coils ---> Aspire Atlantis/Triton or Vaporesso Target cCell factory coils.
Keras...
View attachment 819657
Nice thing about Atmizzo is they seem to always have gear in-stock unlike Svoemesto where we play the waiting game. Although batch 2 of the nKFL will be released very soon. Mine, like others here, has been on back order since their release.Patience.
- Status
Similar threads
