Hungarian NGP Genesis PV
- Thread starter Scottinboca
- Start date
- th_trl_thread_readers 0
- Status
hi loft, looks nice 
i made my first wick on my NGP 4: new to wicking (started one week ago with my Genisis LV), i failed several times, then decided to go for a "chaos-wicklung": wicked the canthal thightly maybe 11 or 12 times around the mesch, checked that there are no free distances glowing, tightened the whole thing - looked terrible but vapes like hell.
chaos wick on NGP 4: 0,2 canthal, mesh 400, started with 1.2 ohm !!!
the hole to fill in the tank is veeeery tiny. even with a syringe / needle, there's no air that can escape the tank during filling, so it' floods.
has anyone an idea to enlarge the fill hole a bit without putting dremel garbage inside the tank? a glowing nail maybe?
BNTL / TTS / vaping ok
i made my first wick on my NGP 4: new to wicking (started one week ago with my Genisis LV), i failed several times, then decided to go for a "chaos-wicklung": wicked the canthal thightly maybe 11 or 12 times around the mesch, checked that there are no free distances glowing, tightened the whole thing - looked terrible but vapes like hell.
chaos wick on NGP 4: 0,2 canthal, mesh 400, started with 1.2 ohm !!!
the hole to fill in the tank is veeeery tiny. even with a syringe / needle, there's no air that can escape the tank during filling, so it' floods.
has anyone an idea to enlarge the fill hole a bit without putting dremel garbage inside the tank? a glowing nail maybe?
BNTL / TTS / vaping ok
Last edited:
Sorry to hear that .
Maybe try contacting them and describing your issue? I am sure they can send you a replacement cap for that...
.Maybe try contacting them and describing your issue? I am sure they can send you a replacement cap for that...
Sorry to hear that
nope, all my fault. just have to stick the syringe completly down to the tank bottom, then carefully fill in.... problem solved
thank you anyway
I looked at this earlier but forgot to respond... but I feel a response is necessary. The wick looks fine, you could even trim it down another mm or so to ensure it doesn't touch the top cap or your drip tip. One thing I feel the need to address is your coil. It looks like it is overlapping or possible touching? But I would keep practicing. Also, don't choke the wick - if you can spin the wick with the coil around it and there are no gaps then that is the best. Here is a picture of my Katana (I don't want to take the top cap off my NGP as it gets a little messy) that I took a couple days ago...
This might help you with making your coil.
And for the fill hole - get a smaller syringe. I use 20ga to fill all my genesis atomizers.
This might help you with making your coil.
And for the fill hole - get a smaller syringe. I use 20ga to fill all my genesis atomizers.
hi loft, looks nice
i made my first wick on my NGP 4: new to wicking (started one week ago with my Genisis LV), i failed several times, then decided to go for a "chaos-wicklung": wicked the canthal thightly maybe 11 or 12 times around the mesch, checked that there are no free distances glowing, tightened the whole thing - looked terrible but vapes like hell.
View attachment 101931
chaos wick on NGP 4: 0,2 canthal, mesh 400, started with 1.2 ohm !!!
the hole to fill in the tank is veeeery tiny. even with a syringe / needle, there's no air that can escape the tank during filling, so it' floods.
has anyone an idea to enlarge the fill hole a bit without putting dremel garbage inside the tank? a glowing nail maybe?
BNTL / TTS / vaping ok
thank you for your advices, nice pic (is there a silver file to connect the coil with the pole?)
i know the coil looks terrible, it's a so called "chaos coil": overlappings and crossings are part of a chaos coil. and even if the measurment of ohm was very poor in the beginning (1.2 ohm yesterday, today 1.8 ohm), it vapes on the niveau far above any eGo type... but sure can be modified i am actually running a chaos coil on my GLV and it's a fantastic vape... 
Edith says: made a new coil, wick same as your's, no free wire bridges, 1.9 ohm, but nothing special to vape. then i used a needle: inserted it into the wick, down to the bottom and then turning it very carefully both clockwise and counterclockwise. after it measures 2.1 ohm, and now my hungarian espresso bomber vapes like my GLV great great great breakthrough, love it
actually i am waiting for 1,6 canthal to try a tandem coil... and yeah, sticking a tiny glass pearl on the upper end of the coil is something i wanny try too. with this pearl you can draw the canthal around the pole and the pearl keeps the wick away, see what i mean ?
thanks again, clouds on your body
(is there a silver file to connect the coil with the pole?)i know the coil looks terrible, it's a so called "chaos coil": overlappings and crossings are part of a chaos coil. and even if the measurment of ohm was very poor in the beginning (1.2 ohm yesterday, today 1.8 ohm), it vapes on the niveau far above any eGo type... but sure can be modified
i am actually running a chaos coil on my GLV and it's a fantastic vape... Edith says: made a new coil, wick same as your's, no free wire bridges, 1.9 ohm, but nothing special to vape. then i used a needle: inserted it into the wick, down to the bottom and then turning it very carefully both clockwise and counterclockwise. after it measures 2.1 ohm, and now my hungarian espresso bomber vapes like my GLV
great great great breakthrough, love itactually i am waiting for 1,6 canthal to try a tandem coil... and yeah, sticking a tiny glass pearl on the upper end of the coil is something i wanny try too. with this pearl you can draw the canthal around the pole and the pearl keeps the wick away, see what i mean ?
thanks again, clouds on your body
Last edited:
thanks.
when it comes to wicking, fine tuning coils and stuff, i seriously have a language problem
read all about it in the ERF (german forum), home of raidy).
but - vaping better and better
vape on
when it comes to wicking, fine tuning coils and stuff, i seriously have a language problem
read all about it in the ERF (german forum), home of raidy).but - vaping better and better
vape on
so, after four days of everywhere use of my NGP 4, i can give a quick review: the mod simply works fine. it's really a light-weight, you can easily wear it in your pockets: no leaking. the Genezis Maxi does a great job, vapes like hell, nice taste and throat hit. good stuff. me likey.
Trust Your Oxidation
Trust Your Oxidation
So got a the new NGP with slide switch coming. Well It says it left Budapest so ya. On YouTube a dude named hondapapi reviewed it and it looks really clean. For 85.00 shipped it looks amazing. Will post when I receive it.
Oh Charlie, looks.like I won't need to start a discussion thread. I kinda just found this...lol. thanks for all your help via email, I appreciate it.
Oh Charlie, looks.like I won't need to start a discussion thread. I kinda just found this...lol. thanks for all your help via email, I appreciate it.
Important note to all current and future NGP users:
The NGPs are built with a plastic rim in the top cap. You can use a small knife (dunno what they are called, but doctors use them for cutting into patients when operating on them) that you carefully twist around the circumference of the plastic to enlarge it to fit larger drip tips. I've done it with mine after the mod maker instructed me to do so, it's easy.
The NGPs are built with a plastic rim in the top cap. You can use a small knife (dunno what they are called, but doctors use them for cutting into patients when operating on them) that you carefully twist around the circumference of the plastic to enlarge it to fit larger drip tips. I've done it with mine after the mod maker instructed me to do so, it's easy
.
Last edited:
Called a 'scalpel.'
Just put myself on the list for an 18350 ring switch and 4.0. Looking forward to getting it. I think the box mod will be great especially with an 18650......
Sent from my HTC_Amaze_4G using Tapatalk 2
Just put myself on the list for an 18350 ring switch and 4.0. Looking forward to getting it. I think the box mod will be great especially with an 18650......
Sent from my HTC_Amaze_4G using Tapatalk 2
Www.Ngp.hu is the website
Info@ngp.hu was the email address I wrote. I used Google email to translate to Hungarian, but Charlie wrote back in English. They range about 55-70 bucks or so, which is great for a genesis. I'm so happy to get a compact 18650 box mod.
Sent from my HTC_Amaze_4G using Tapatalk 2
Info@ngp.hu was the email address I wrote. I used Google email to translate to Hungarian, but Charlie wrote back in English. They range about 55-70 bucks or so, which is great for a genesis. I'm so happy to get a compact 18650 box mod.
Sent from my HTC_Amaze_4G using Tapatalk 2
I have seen 510 connection with attys from them.
I know a couple of folks at home...sorry UK have them and am waiting on details.
Sent from my MB860 using Tapatalk 2
I know a couple of folks at home...sorry UK have them and am waiting on details.
Sent from my MB860 using Tapatalk 2
inbetween - made a standard 4,5 coil 0,2 canthal, standard wick. gave me finally 2.4 ohm, vape it at 5v. so lovely, a really cool but hot pocket device 
- Status
Similar threads
