Finally put the 1.3 air tube in and what a difference , it's really tight maybe even to tight even with the airflow all the way open.
Hussar RTA single coil deck (attack of the clones)
- Thread starter rifky
- Start date
- th_trl_thread_readers 0
- Status
Isnt there the standard 2mm and 1.3mm so thats 3 Airflow pins in total for hussar
Sent from my ONEPLUS A3003 using Tapatalk
Yes the 2 mm was ok just wanted to try the 1.3 and if you like tight hits that's the one to get. I think flavor is a little better also.
Dont know how many opted for the ss tank Version.
The Hussar I use
2 in rotation.
1 with an SS tank installed
1 with micro tank installed,
Micro is just standard vaping wuth standard airflow pin,
SS is used for my own DIY 420 stuff works a treat kept me from ever going back to cig at all the Only draw back to this Hussar Setups
to me is the Orings Like i say once in a while like
Screwing top refill part on it has a tendency to pop out the Oring out occasionally whish they offred smaller ones will have a look if i have any 20mm or low sizes in my spares ,
Other than that with a 1.3mm Airflow pin it works perfectly fine for what im using it for on SS tank .
Whilst the micro tank is just excellent at it ,
But the micro tank on my second one with finned doomed top cap just looks an feels nicer overall
Sent from my ONEPLUS A3003 using Tapatalk
The Hussar I use
2 in rotation.
1 with an SS tank installed
1 with micro tank installed,
Micro is just standard vaping wuth standard airflow pin,
SS is used for my own DIY 420 stuff works a treat kept me from ever going back to cig at all the Only draw back to this Hussar Setups
to me is the Orings Like i say once in a while like
Screwing top refill part on it has a tendency to pop out the Oring out occasionally whish they offred smaller ones will have a look if i have any 20mm or low sizes in my spares ,
Other than that with a 1.3mm Airflow pin it works perfectly fine for what im using it for on SS tank .
Whilst the micro tank is just excellent at it ,
But the micro tank on my second one with finned doomed top cap just looks an feels nicer overall
Sent from my ONEPLUS A3003 using Tapatalk
I just got my 1.3mm air tube and extra spare o-rings, and what a difference. My Hussar feels like a completely different RTA, and for the better. I run it now with the air feed slots wide open and 1.3mm air tube, as compared to when I was using the 2mm air tube and the air feed slots almost closed. I definitely like the 1.3mm air tube better, I like a nice tight draw.
Got 2 more Hussars on the way , not a bad price for all kit too , 13.76 each ,
Sent from my ONEPLUS A3003 using Tapatalk
3 in on tank kit hussar/ SS /PC an micro pc / works out around 20£ each in total,
Sent from my ONEPLUS A3003 using Tapatalk
3 in on tank kit hussar/ SS /PC an micro pc / works out around 20£ each in total,
Last edited:
Got 2 more Hussars on the way , not a bad price for all kit too , 13.76 each ,
Sent from my ONEPLUS A3003 using Tapatalk
3 in on tank kit hussar/ SS /PC an micro pc / works out around 20£ each in total,
Where is that being sold at benley ??
+1
I only run mine w 1.3, never even tried the more open draw.
Seen a new colour 75c id like too
The others a 75D ? What ever the d stands for both VT mods by Hcigar
Sent from my ONEPLUS A3003 using Tapatalk
Really dissatisfied with all 3 of my Dna75C's. Horrible battery life. The DNA60 has been leaps and bounds better on that front. Hoping they can pull off a DNA60C without changing the battery life gold standard that comes with it.
Haven't been too happy with mine in TC, same maps and everything as my other dna's but the accuracy is off.
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
Ive used Djslabs csv file for SS on my VT75C seems to work ok for me.
Like the size and easier adjustments on the 75C
Maybe Evolve will release an update for setting
been jumping between my 75s
and my SXK 70w
where to TC need the taste adjust boosting a little higher in numbers 16+ for a better vape in SS have my Fev v4 on it 4mm SS build nice tight draw
Sent from my ONEPLUS A3003 using Tapatalk
Like the size and easier adjustments on the 75C
Maybe Evolve will release an update for setting
been jumping between my 75s
and my SXK 70w
where to TC need the taste adjust boosting a little higher in numbers 16+ for a better vape in SS have my Fev v4 on it 4mm SS build nice tight draw
Sent from my ONEPLUS A3003 using Tapatalk
Fasttech or Gearbest?Got 2 more Hussars on the way , not a bad price for all kit too , 13.76 each ,
Sent from my ONEPLUS A3003 using Tapatalk
3 in on tank kit hussar/ SS /PC an micro pc / works out around 20£ each in total,
Also just placed an order for Squape E motion from overseas for the 4.5ml version outside of UK TDP Regulations of 2ml max capacity ,
Just arrived my Authentic smaller Squape Reload tank , these have been discontinued every where now ,
So only a few spares left avalible so need to order all the bits i can now ,
post screws , spare glass , orings , ect ,
Took me a dam long time to acquire the Reload had been looking for 6 plus months.
Seems Squape is only keeping stocks of X an E in
Might pick up a coloured top cap abs Airflow ring for X , give it a newer E style look ,
Sent from my ONEPLUS A3003 using Tapatalk
Just arrived my Authentic smaller Squape Reload tank , these have been discontinued every where now ,
So only a few spares left avalible so need to order all the bits i can now ,
post screws , spare glass , orings , ect ,
Took me a dam long time to acquire the Reload had been looking for 6 plus months.
Seems Squape is only keeping stocks of X an E in
Might pick up a coloured top cap abs Airflow ring for X , give it a newer E style look ,
Sent from my ONEPLUS A3003 using Tapatalk
Last edited:
- Status
