I gotta stay away from...

[Wizzlefits]

Hope that snot factory goes on strike real soon Hottie! (A snotty hottie is a scary thing!)

Anyone have a fast tech order get stuck in Hong Kong? One of mine has been there since 9/3. Just shows "Acceptance". I've got 4 others that should ship this week... or next week.. or maybe the week after that. lol!
Ordering from FT is getting to be more like "pre-order". Which reminds me.. I got my iTaste 134 (can't stop grinning), Hybrid Elite (sucks), Silver Dragon (pretty nice) and brass Bagua (bloody nice). oh, and 2 iChybrids (like em).

Soooo.. in other non vaping related news..
Only 4 more days till vacation!
How do you tell when you REALLY need a vacation?
When your "give a sh**t" doesn't even bother to get out of bed. LOL!

 

[hottierockstar]

Hope that snot factory goes on strike real soon Hottie! (A snotty hottie is a scary thing!)

Anyone have a Fast Tech order get stuck in Hong Kong? One of mine has been there since 9/3. Just shows "Acceptance". I've got 4 others that should ship this week... or next week.. or maybe the week after that. lol!
Ordering from FT is getting to be more like "pre-order". Which reminds me.. I got my iTaste 134 (can't stop grinning), Hybrid Elite (sucks), Silver Dragon (pretty nice) and brass Bagua (bloody nice). oh, and 2 iChybrids (like em).

Soooo.. in other non vaping related news..
Only 4 more days till vacation!
How do you tell when you REALLY need a vacation?
When your "give a sh**t" doesn't even bother to get out of bed. LOL!

you're not kidding wizzle...i have been blowing my damn nose since 430 this morning...pretty much non stop

my last FT order was in HK until after i had it in my grubby little hands...something about tracking not being updated for homeland security reasons or something like that? (i swear i am not on medication...yet)

have you ordered the nem clone?
i feel the need for another mod....i dunno why since i am a massssssssive failure at my aga-t2 rebuilds LMAO
i tried for 3+ hours yesterday and never got it to work (probably not the best idea when being a full time booger barn)...
i am assuming that i did something wrong with the mesh as i know my wire was perfect...after 16+ tries it better be right? nothing got thrown and amazingly there were no tears LOL

despite my boycott of nova i am apparently into self-torture....ordered mesh today....

 

[The Ocelot]

I am so glad I'm content with carto tanks, dripping/bottom-feeders and the Protanks when I'm lazy. Now if I could just find juice...

 

[skyztheLynnit]

Hogtie.. I'm scared to say I won't watch the envy anymore.. BC I'm a glutton for punishment lol.. Wizzle congrats on your itaste

The Fuzion was a no go Ocey?

 

[hottierockstar]

Hogtie.. I'm scared to say I won't watch the envy anymore.. BC I'm a glutton for punishment lol.. Wizzle congrats on your itaste

The Fuzion was a no go Ocey?

oh i gave myself that .01% backdoor LMAO

 

[Shadav]

did you ever get the unicorn's blood?

 

[Wizzlefits]

Yep I ordered the Nemesis clone. No way in hades I'll buy the real one. Just my opinion, it is not worth $185/$200.

Did you oxidize your mesh and wire before you started? I have had days where I had to load the mesh with juice and light it & let it burn off several times before I could get rid of the hot spots.

Past bed time.. gotta work in 5hrs. 18min. arrrggg and grr! hehehe!

 

[skyztheLynnit]

Omg my spell check called you hogtie ROFL! My kindle went bye bye in it's sleep over the weekend.. Forcing me to upgrade.. I haven't trained the new tablet yet. Sorry hogtie! (You know .. I have .... ing missed you!)

 

[Zak Rabbit]

you're not kidding wizzle...i have been blowing my damn nose since 430 this morning...pretty much non stop

my last FT order was in HK until after i had it in my grubby little hands...something about tracking not being updated for homeland security reasons or something like that? (i swear i am not on medication...yet)

have you ordered the nem clone?
i feel the need for another mod....i dunno why since i am a massssssssive failure at my aga-t2 rebuilds LMAO
i tried for 3+ hours yesterday and never got it to work (probably not the best idea when being a full time booger barn)...
i am assuming that i did something wrong with the mesh as i know my wire was perfect...after 16+ tries it better be right? nothing got thrown and amazingly there were no tears LOL

despite my boycott of nova i am apparently into self-torture....ordered mesh today....

I'll come up and help you with a couple builds if you promise not to sneeze on me... I'm due a trip up there.

Sent via the guys that made Star Trek low tech.

 

[InTheShade]

I just wanted to say I really like the people who post in this thread. Y'all are awesome.

Hogtie, I know you don't know me (I've seen you a few times around the boards) but I wish you a sincere get well soon.

I know it's Hottie, but Hogtie is just too funny a spellcheck.

 

[EddardinWinter]

I am so glad I'm content with carto tanks, dripping/bottom-feeders and the Protanks when I'm lazy. Now if I could just find juice...

OMG!

I put the wrong address (off by 10) down with Provape, so my ProVari went to the wrong address today and was returned. Now, I gotta wait for it to travel west & east again....ugh.

Instead of having my bad-... black satin ProVari today, I am most likely looking to see it early next week!

Dumb, dumb, dumb.

Tapped out

 

[Zak Rabbit]

OMG!

I put the wrong address (off by 10) down with Provape, so my ProVari went to the wrong address today and was returned. Now, I gotta wait for it to travel west & east again....ugh.

Instead of having my bad-... black satin ProVari today, I am most likely looking to see it early next week!

Dumb, dumb, dumb.

Tapped out

That is Greek tragedy material right there! A king without his wand!

Sent via the guys that made Star Trek low tech.

 

[The Ocelot]

Hogtie.. I'm scared to say I won't watch the envy anymore.. BC I'm a glutton for punishment lol.. Wizzle congrats on your itaste

The Fuzion was a no go Ocey?

I don't know yet I kind of like them, maybe more steeping will help. One I haven't tried since it's not what I ordered and it smells like something I can't identify. They sent the replacement out today.

 

[The Ocelot]

did you ever get the unicorn's blood?

Yes. I like the taste, but I can barely taste it. At least it's not yucky. I'm going to try it in a carto tank and see what that does.

 

[The Ocelot]

OMG!

I put the wrong address (off by 10) down with Provape, so my ProVari went to the wrong address today and was returned. Now, I gotta wait for it to travel west & east again....ugh.

Instead of having my bad-... black satin ProVari today, I am most likely looking to see it early next week!

Dumb, dumb, dumb.

Tapped out

I'm sorry but at least it was was found.

 

[Peekebe]

Yes. I like the taste, but I can barely taste it. At least it's not yucky. I'm going to try it in a carto tank and see what that does.

I got mine and it was the same way. Could hardly taste anything except the PixieDust and that baby is super menthol to me. So I am letting them steep for a while too. They taste kinda bitter, not sweet at all. I have tasted them straight out of the bottle and they are fine but when I put them into my tank they turn bitter. I messed with voltage and power, up and down and all around. So I ended up adding a little of a different brand and that seemed to help. So we will see what some time does to them.

Hope you feel better Hottie!!!

Shade you are not acting like a d-bag at all. The company should honor the commitment they made when they agreed to provide a prize. Even if the owner if having a difficult time one would think that there are other employees that could handle something as small as shipping. Even if it is a small little company, especially if it is a small company. Reputation is a valuable commodity and failing to simply ship you your prize does not bode well to their ability to ship anything so a customer who had ordered from them. Honestly if there is someone there that can answer the phone and divulge the owners personal information then that person can certainly get off their a** and give you your stuff. Ewwwwww that kind of crap drives me NUTS!!!!

Our Sir Lion had a slight blonde moment LOL

 

[SirSteve]

Yep I ordered the Nemesis clone. No way in hades I'll buy the real one. Just my opinion, it is not worth $185/$200.

Did you oxidize your mesh and wire before you started? I have had days where I had to load the mesh with juice and light it & let it burn off several times before I could get rid of the hot spots.

Past bed time.. gotta work in 5hrs. 18min. arrrggg and grr! hehehe!

Wizzlefits has the right idea. Best of luck with the AGA, it really is rewarding when you get a setup that works, and the wick/coil last a long time.

Glad you are feeling well enough to check in hottie.

Can't remember who posted it, but thanks for Red/Blue DIY, it is now one of my favorites.

That is some impressive vape mail Wizzlefits, can you send it to my house?

 

[SirSteve]

OMG!

I put the wrong address (off by 10) down with Provape, so my ProVari went to the wrong address today and was returned. Now, I gotta wait for it to travel west & east again....ugh.

Instead of having my bad-... black satin ProVari today, I am most likely looking to see it early next week!

Dumb, dumb, dumb.

Tapped out

Did you get another Provari? Nice. Some time in 2015 I may get another, until then I'll just have to suffer with one.

 

[Shadav]

lmfao@the past discussions of this thread
wow talking about vibrating and ribbed mods and hog tying hotties

vaping pleasures....who knew?

 

[Zak Rabbit]

lmfao@the past discussions of this thread
wow talking about vibrating and ribbed mods and hog tying hotties

vaping pleasures....who knew?

One time at band camp, I stuck my pv in my....

Sent via the guys that made Star Trek low tech.