Iatty
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
would this wire be ok in place of the nickel wire? Tungsten Wire .009 (.23mm) x 10' (3m) [W-W-009-10] - $9.00 : ElectronTubeStore, Electronic components, connectors, raw materials
@Imeo Did you consider trying this method for wick: SS400 Mesh Wich
I bought some at The Mesh Company and can't wait to try this out
I bought some at The Mesh Company and can't wait to try this out
I dont think its good for health but maybe I am wrong ainako. Better to buy something like nickel wire as I do or brass plated with nickel or silver, or gold etc
Anyone can put anything inside Iatty Jesper. I also have thought to use a very small piece of mesh only where the wire touch and the rest can be wick.
@Imeo Did you consider trying this method for wick: SS400 Mesh Wich
I bought some at The Mesh Company and can't wait to try this out
I agree. I think you will have too many issues with the mesh creasing in that small of a piece, unless you make a long one and cut it to fit. I have used mesh for my ce2s, and putting the curve in is difficult even with a piece 3 inches long. But putting the wick inside of the mesh might work.
on the go....with my Croatian Beast...Hybrid Mini!
senthiya , any chance of a pm also ? many thanks
Hey Imeo is it ok if I post a link to cheap adapters or would you rather I not?
My only concern with multiple adapters is the increased number of insulators. Not all adapters are made the same; especially the insulators and a direct short is no fun at all. If I did use multiples, after assembly I'd check with a multimeter just to be on the safe side. Personally I'll stick with a single adapter made to the proper length with two connectors.
no problem vanhalen. It would be a nice help to all GG users
Not a tutorial per se; but it's really simple.
Atty tube cut to length.
Connectors on each end.
SS tube (hypo needle) through the positive connectors.
To me the joy of using anything on top of a GG is utilizing the adjustable draw. Once I get my hands on an Iatty I'll build the adapter....HINT
I dont think adapters can be sorted Para
Nope....that's why I hope everyone will take a minute and check their setup. It only takes a minute to make sure everything is ship shape.
we can try to use this one as a single adapter, but it's probably too long (18mm)
Ovale eGo-Classic Adattatore X caricabatterie Home(510) a Batterie eGo - Adattatori batteria/atom - FaiDaTe
Here is the link to adapters, you will need 510 to 808/901 and 808/901 to 510
PV Adapters
I have one and it is quite a bit too long.
Thanks para that sounds easy enough.
PV Adapters
I have one and it is quite a bit too long.
Thanks para that sounds easy enough.
Last edited:
I wish there was a better way to connect Iatty to the GGTS....it just seems like a waste to use the adapters and make the PV even longer for no reason, other than to be flush with the top cap. {Insert longer is better jokes here}
I don't care if it uses adaptors as long as the adaptors work with it.
As it is, it will work with all mods, count your blessings kids.
The thought that's been on my mind is what is it like? Is the vapor similar to anything? With that size wick in it is it a fog machine?
From what I've seen its a 510 e2 platform with a monster wick.
Personally I truely expect the iatty to perform better than anything to date.
As it is, it will work with all mods, count your blessings kids.
The thought that's been on my mind is what is it like? Is the vapor similar to anything? With that size wick in it is it a fog machine?
From what I've seen its a 510 e2 platform with a monster wick.
Personally I truely expect the iatty to perform better than anything to date.
Last edited:
So you want to get rid of the collector tank? The Iatty will sit flush on the top of the collector tank with the right adapters and won't be a lot larger than a avs/ufs would be(I actually don't know if it's bigger or smaller than avs/ufs, i dont want to search for specs) but it looks perfectly normal to me in the videos with Imeo.
- Status
