Just for a visual reference, this is how my o ring fits on the mouthpiece. Everything is working fine, even with just the one o ring on the ceramic cup. As long as all the areas that need to be sealed are sealed, the iAtty should not leak.
Iatty
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
its not that I am not generous, its because I havent thought of that geof. I think you know if I am generous buddy.
Its a nice idea and I will do it for sure
Its a nice idea and I will do it for sure
Just for a visual reference, this is how my o ring fits on the mouthpiece. Everything is working fine, even with just the one o ring on the ceramic cup. As long as all the areas that need to be sealed are sealed, the iAtty should not leak.
Thanks Lee..ok that looks like one of the fatter ones from the left group in my pictures. It's the way i have it set up now.
That's not what I got. I got the same ones that Geoff posted a pic of. Silent how the heck did you get even one in there. I have spent the last hour trying to get them in the hole, "I thought Imeo made it look so easy in the video, am I ......ed?" I even had the ceramic in vise grips (very gently of course
) and couldn't get one in. You people must just walk around and crush things with your super human hand strength, I bet y'all can blow bubbles with Now N Later's too Thank God it isn't just me...
Awesome Imeo! Of course YOU are generous....I can personally vouch for that. I'm glad you agree that giving extra o-rings is the way to go.
I also got the same orings as Geoff but I was able to get them both pushed in with allot of effort, I didn't know that this was an issue until after I got it vaping so yes it is definitely possible to get both the same size orings inside. Try a little dab of Vaseline it should help.
Ok I think that is the problem. I think i received 2 of the top ones and one of the middle, but none of the bottom.
Right now I have one of the top ones on my mouthpiece - which looks right. I have another one of the top ones on the post - but it doesn't fit inside the delrin at all. And then I have the middle one on the post as well which does fit inside the delrin, but loosely.
I'm pretty sure you got the wrong size o rings as you should have a very small one that goes on the ceramic followed by a fat one this will sit just nice in the plastic top without having to force anything
I think my o-rings are a bit off too, especially the bigger one that goes under the delrin mouthpeice. It is very loose in there and very difficult to line up. I found a slightly bigger (but not thick enough) o-ring in my UFS o-ring spares that I put in the bottom and then put the smaller (thin) one I received with my iatty on top of it to narrow the hole. Seems to be working for now, but I would like to get the right ones if anyone figures out what they are.
I got mine in today . It's all put together and vaping like a champ. Imeo, I must admit I had my doubts about the iAtty, but I still wanted to try it out. I am very glad I did. The vapor has incredible volume and the flavor is very close to my home-made mods and with some tweaking of the control ring on the GGTS it does get amazing flavor.
I got mine from Bruce at COV and I can assure everyone who is asking questions that Bruce sent them out configured correctly. I had no issues putting it together. The 2 o-rings on the ceramic fit into the delrin, but they need to be walked in, they will nit just push straight in withoutnalot of effort. It took me about 30 seconds to fit the ceramic into the delrin.
I lubed the o-rings and the delrin VERY lightly with Vaseline and started them in on one side then used the non-serrated part OD a butter knife to gently walk the oaring the rest of the way in. Then the same procedure with the second one and the o-rings were fitted into the delrin. Then I pushed the whole assembly together with my thumb and index finger.
I have no leaks and everything is working as it should be.
Thank you for making the iAtty. I must give give credit where it is due... this is definitely one of the very best atomizers available today at any price.
To those of you having some problems getting it to go together, keep at it, it is worth the effort I have no doubt that anyone who has theirs working properly will disagree.
. It's all put together and vaping like a champ. Imeo, I must admit I had my doubts about the iAtty, but I still wanted to try it out. I am very glad I did. The vapor has incredible volume and the flavor is very close to my home-made mods and with some tweaking of the control ring on the GGTS it does get amazing flavor.I got mine from Bruce at COV and I can assure everyone who is asking questions that Bruce sent them out configured correctly. I had no issues putting it together. The 2 o-rings on the ceramic fit into the delrin, but they need to be walked in, they will nit just push straight in withoutnalot of effort. It took me about 30 seconds to fit the ceramic into the delrin.
I lubed the o-rings and the delrin VERY lightly with Vaseline and started them in on one side then used the non-serrated part OD a butter knife to gently walk the oaring the rest of the way in. Then the same procedure with the second one and the o-rings were fitted into the delrin. Then I pushed the whole assembly together with my thumb and index finger.
I have no leaks and everything is working as it should be.
Thank you for making the iAtty. I must give give credit where it is due... this is definitely one of the very best atomizers available today at any price.
To those of you having some problems getting it to go together, keep at it, it is worth the effort
I have no doubt that anyone who has theirs working properly will disagree.
Also, if anyone is interested...
I ordered my adapters from good prophets vapor and my iAtty sits flush on the top cap of my GGTS and the air control ring works as if it was made to be used in this configuration.
I ordered my adapters from good prophets vapor and my iAtty sits flush on the top cap of my GGTS and the air control ring works as if it was made to be used in this configuration.
I got mine in today
I got mine from Bruce at COV and I can assure everyone who is asking questions that Bruce sent them out configured correctly. I had no issues putting it together. The 2 o-rings on the ceramic fit into the delrin, but they need to be walked in, they will nit just push straight in withoutnalot of effort. It took me about 30 seconds to fit the ceramic into the delrin.
I lubed the o-rings and the delrin VERY lightly with Vaseline and started them in on one side then used the non-serrated part OD a butter knife to gently walk the oaring the rest of the way in. Then the same procedure with the second one and the o-rings were fitted into the delrin. Then I pushed the whole assembly together with my thumb and index finger.
I have no leaks and everything is working as it should be.
Thank you for making the iAtty. I must give give credit where it is due... this is definitely one of the very best atomizers available today at any price.
To those of you having some problems getting it to go together, keep at it, it is worth the effort
So you put the o-rings in the delrin first and then pushed the stem of the ceramic through??
No, I kept the o-rings on the ceramic. I think you will definitely damage the o-rings if you put them in the delrin and then try to push the ceramic through.
Got it....I guess that means you are using the wrong O-ring on the mouthpiece then. Glad you got it working though... I may try your approach.
Not at all, the one for the mouthpiece fit's perfectly with almost no effort to put it in place.
I did it reverse, I took off the 2 o-rings and push them inside of the delrin. then place the ceramic cup... it was easy.
Just recieved my Iatty. It seems like people are having problems with o-rings on ceramic. Unfortunately, I'm too busy right now to try it, but I just took a glance at the ceramic with 2 o-rings and I think they are the same size, too. I'll try it as soon as I get back from work. Thank you Imeo. I seriously cannot wait to try this.
- Status
