Iatty

[CarolCrocbag]

I desided to send 2 different o-rings for the ceramic of the Iatty. You put the very small one first inside ceramic and then the bigger one. I did this to make it easier to fit them inside ceramic.

Quoted as it may help someone and I guess lmeo means onto the, not inside ceramic. The small one is blummin' tricky to get on.

Getting there, slowly but surely. Been out all afternoon getting a Multimetre; got mine from the Wilkinson chain. £8.78 for a Corelectronics, digital one.


*Edit. Forget the multimetre from Wilkinson, its lowest setting is 2K.

 

[cliffy1]

Imeo a question for you,if I leave the iatty laying down or standing upright after a little while Its leaks alot out of the bottom of the atty connection,now I know this is probably flooding of the atty,and I`m sure in the thread somewhere you tell how to stop this,but I cannot find it now. Would you repeat please. I think it is something to do with the cone inside but not sure, do I need to tighten it a little more.

 

[SparkyII]

Might there be a few, slender strands of wick on the bottom threads, allowing communication between the tank and the outside world?

 

[CarolCrocbag]

Wow, just wow. Absolutely brilliant. Great stuff lmeo.
Yep, you guys waiting on yours are in for a real treat.

 

[Repent]

I will repent my friend Please tell me the other saying for me buddy, I want to hear!

Imeo;

When I say "Dollars to Doughnuts", I really mean "Sure as Shootin".

"Dollars to Doughnuts" or "Dollars for Doughnuts" is a saying that means something is a sure bet or a certainty.

"Sure as Shootin" means the same thing. Also both can mean "certain, without a doubt, or established beyond question".


So when I say that Dollars to Dougnuts your new VV device will rock I say that with certainty because you have established your abilities beyond question, and buying it from you is a sure bet because of the genius of design and the obvious quality of craftsmanship.

I'm pretty sure every reader here raised in the US is familiar with those sayings and will select "Like" on this post in support of your efforts. We all know how much you "Keep Your Nose to the Grindstone".

And to all the readers............, HaHA I'm on the list first!!!

 

[Repent]

Postman has been but no delivery for me today.

Glad you finally got sorted Cliffy and it's great to hear how good you think it is. Roll on Monday and hope I get mine then.

Feeling your pain Lee

 

[Repent]

I think any delays are due to the fact Cam has to package it all up and post them himself. We must be further down the list. At least it will give us a chance to learn a bit more by reading other peoples feedback and tips.

Agreed Lee. If all those receiving their iAtty will comment for us on their experiences that would be great. Course it will make the waiting even worse, but hey, I'm a "Glutton for Punishment".

 

[Repent]

Wow, just wow. Absolutely brilliant. Great stuff lmeo.
Yep, you guys waiting on yours are in for a real treat.

I'm sorry but you simply cannot make comments such as those without a whole lotta details to back it up.

 

[CarolCrocbag]

I'm sorry but you simply cannot make comments such as those without a whole lotta details to back it up.

I have been vaping on and off for 18 months, starting with the Joye 510 ecigs, then got myself a Gary Dibleys 5v USB passthrough. Trying different methods of filling carts, i.e. Lipton teabags, blue aquarium foam.
Went to 901's then back to 501's.
Then came the LR atomisers, nice.
Then came my first GG piece, the UFS; couldn't afford a GG to use it on, so bought myself a Megalodon.
That was currently my best vaping experience, with second place being straight dripping on a 510.
More vapour constantly and better flavour, with the ease of not having to drip or mess around all day.
This beats the UFS for vapour production and is constantly producing better vapour still, with less messing around. i.e. Adjusting the juice flow and air flow of the UFS, to stop or release flooding.
Found it a little tricky setting the iAtty up and God knows what resistance I am at, though it is my best vaping experience to date.

p.s. I have tried cartomizers and clearomizers too b.t.w.

 

[highvoltage69]

Imeo a question for you,if I leave the iatty laying down or standing upright after a little while Its leaks alot out of the bottom of the atty connection,now I know this is probably flooding of the atty,and I`m sure in the thread somewhere you tell how to stop this,but I cannot find it now. Would you repeat please. I think it is something to do with the cone inside but not sure, do I need to tighten it a little more.

If you overflood the Iatty just blow from its bottom and the liquid will come out of the mouthpiece.I got this from the first page of this thread but i would not presume that it should be leaking that much out the bottom .

 

[jools]

I have been vaping on and off for 18 months, starting with the Joye 510 ecigs, then got myself a Gary Dibleys 5v USB passthrough. Trying different methods of filling carts, i.e. Lipton teabags, blue aquarium foam.
Went to 901's then back to 501's.
Then came the LR atomisers, nice.
Then came my first GG piece, the UFS; couldn't afford a GG to use it on, so bought myself a Megalodon.
That was currently my best vaping experience, with second place being straight dripping on a 510.
More vapour constantly and better flavour, with the ease of not having to drip or mess around all day.
This beats the UFS for vapour production and is constantly producing better vapour still, with less messing around. i.e. Adjusting the juice flow and air flow of the UFS, to stop or release flooding.
Found it a little tricky setting the iAtty up and God knows what resistance I am at, though it is my best vaping experience to date.

p.s. I have tried cartomizers and clearomizers too b.t.w.

my resistance is 1.8 according to my multimeter ( screwfix £12.99 incase anyone is looking for one ) its on my ggtb right now with a 3.7 battery , clouds of WARM vapour , great taste - just gorgeous, im sorry some of you guys havent got yours yet but trust me , its going to be worth the wait , and if i can make a resistance wire ( and i was worried about it ) then ANYONE can , im blond and a girl for gods sake ! lol ;-)

 

[silentt]

A blond female that can make the wires in the iAtty, that sounds very good.

I'm glad you are liking the iAtty, I can't wait to get mine and learn all of this.

 

[cliffy1]

If you overflood the Iatty just blow from its bottom and the liquid will come out of the mouthpiece.I got this from the first page of this thread but i would not presume that it should be leaking that much out the bottom .

Right that's what I do and it clears the atty fine .....its when its left standing or laying down the juice come out of the atty connection the threaded part not from the threads of the bottom cap.coz of no answer yet from Imeo I have tightened down the inside cone a touch and it seems to have remedied it..........I hope

 

[lee72]

I'm really glad to hear people are having such good experiences with the iAtty. I'm really looking forward to getting mine.

Cliffy it sounds like tightening the cone has stopped it wicking too much. At least we know it wicks well.

 

[scope]

Anyone struggling with the smaller washer that goes on the ceramic, for what it's worth, I slid mine over the pointed wick cone first and then onto the ceramic! maybe of use to someone? Well done Jools, there's hope for me yet then lol.

 

[CarolCrocbag]

my resistance is 1.8 according to my multimeter ( screwfix £12.99 incase anyone is looking for one ) its on my ggtb right now with a 3.7 battery , clouds of WARM vapour , great taste - just gorgeous, im sorry some of you guys havent got yours yet but trust me , its going to be worth the wait , and if i can make a resistance wire ( and i was worried about it ) then ANYONE can , im blond and a girl for gods sake ! lol ;-)

The multimetre I got today has a lowest setting of 2K. Just made a new resistance wire as I burnt the wick very slightly with my first. I was putting its through limits mind, chugging away on it.
The first one was reading 0.2-0.3, not sure what would be, any help? The second one I just did was reading 0.4-0.5?
Vaping fine again now, with no slight burnt taste.
On 3.7 battery aswell Jools.
Also I find I can adjust the airflow, by tightening the iAtty right up to my Don. Can actually stop the air if I tighten it hard enough and the slight turn to full flow again, or anything inbetween, stil leaves the iAtty flush with the top of my Don.

 

[highvoltage69]

I dont know how much you know about multimeters but just a wee hint that you should toutch the leads together first and see what it reads then test your atty and subtract the amount you got with the leads toutched together .

 

[CarolCrocbag]

I dont know how much you know about multimeters but just a wee hint that you should toutch the leads together first and see what it reads then test your atty and subtract the amount you got with the leads toutched together .

Mine on the lowest resistance setting it has 2K ohm, starts at 1. and when I touch the ends together, goes down to .001 ?
Never used one before.

*Edit. The resistance wire readings I mentioned should have been .002-.003 and .004-.005.

 

[highvoltage69]

Hi Carol,

I believe this is due to the range you are on. You seem to be on a 1kOhm range. i.e. 1.0 would be 1kOhm or 1000 Ohms. Going by this 0.001 would be a thousanth of a kOhm or one Ohm. Does the ohmeter have any other range settings as you would get a more accurate measurement on a lower range.

 

[silentt]

When I test my 1.5ohm atty with my meter set on 200 OHM settings I get:
1.8 and the leads touched together it's .3 so thats 1.5ohm

But when I use 2000 OHM setting I get:
2 and the leads touched together it's 1 so thats 1

I don't know much about using meters but it's a lot easier when you have the lower Ohm setting, I was going to try and convert the 2000 setting with 200 but I have no clue sorry