Oh I am, its been one stressful month. Inflection is lost in text. That was more playful sarcasm than a real suggestion ;p
Jay
Jay
- Status
*vapes a chill pill*
*twitches*
I'm going into the workshop tonight to get some bodies ready for these badboys.
*twitches*
I'm going into the workshop tonight to get some bodies ready for these badboys.
This is true, but to some extent would be possible for you if you use a 18490 and run an extra ground (wire?) to the negative contact on the kick, and do something (???) to hold it all in place. Not easy, but possible.
Don't forget the wattage adjustment location. He'll have to mount it where it's removable to make the changes and then put back in place or provide access to make the change or.....reposition the adjust module and that's WAY risky. In it's present config, anything other than what it was designed for will be a real challenge.
Hopefully a future version will position the wattage adjustment so we have external access for adjustments while it's in place.
If you have something like an acrylic mod like one of the ones from Madvapes, you could line the ground strip along with the ground tab on the kick. You would not be able to let it spin inside the mod though.
Is there somewhere a complete, concise (i.e., not spread over many posts by different people) description of the Kick module and it's use?
(???) is the secret sauce
The box provides support from 2 sides, three counting the lid, but I won't count that as it is too fiddly sounding. It is going to want to pop out where the kick meets the positive battery, so I propose 2 screw in posts to hold the kick in place and extend just a bit to hold the battery too, provided it is pushed from below by the spring.
Or just tape it to the top of the battery, each and every time
Cool, there is a vapetv type of vid from two brits that cover it quite thoroughly.
http://www.vapourtrails.tv/?p=2265
starting at 36:00
The box provides support from 2 sides, three counting the lid, but I won't count that as it is too fiddly sounding. It is going to want to pop out where the kick meets the positive battery, so I propose 2 screw in posts to hold the kick in place and extend just a bit to hold the battery too, provided it is pushed from below by the spring.
Or just tape it to the top of the battery, each and every time
Cool, there is a vapetv type of vid from two brits that cover it quite thoroughly.
http://www.vapourtrails.tv/?p=2265
starting at 36:00
Last edited:
(???) is the secret sauce
The box provides support from 2 sides, three counting the lid, but I won't count that as it is too fiddly sounding. It is going to want to pop out where the kick meets the positive battery, so I propose 2 screw in posts to hold the kick in place and extend just a bit to hold the battery too, provided it is pushed from below by the spring.
Or just tape it to the top of the battery, each and every time
Tape = Awesome
I was thinking with the telescope on the GG you could still use an 18650 with the Kick, just have to expand the telescope to accommodate.
Well considering you will be bringing any metal 18650 mod to 18500 we can assume it is 15mm high and around 18mm in diameter. You would essentially be able to put it into things like the silver bullet, omega, ggts etc.
Developer told me he tried hand jamming it into a 17mm tube, depending on room, you might be able to go a little thinner like a mod that can handle a 17670.
Developer told me he tried hand jamming it into a 17mm tube, depending on room, you might be able to go a little thinner like a mod that can handle a 17670.
Last edited:
Yes it will. See the vaportrails.tv video linked on the previous page of this thread. If it's the video I think it is, just FF to about 28 minutes in. He uses it in a GGTS ;-)
I don't know if they used a 18500 or a 18650 batterie in the GGTS on vaportrails.tv.
See this one: The Haze Hour
FF to just before the 35 minute mark, he even takes the battery out to show that it's an 18650 ;-)
FF to just before the 35 minute mark, he even takes the battery out to show that it's an 18650 ;-)
No, that was a different video from the link I saw on the previous page of this thread. I was sure I'd seen that particular point in a video, though, so hunted it down ;-)
- Status
Similar threads
