Introducing Torpedo Tanks.

[fenderbc]

Jonah, thanks for the tip. How about pushing it through the battery connector end? I normally do that when I refill a tank. So, you are recommending filling tank from the tip end instead of the connector end?

I found that if you leave the rubber end in your carto when you push it into the tank it will protect the O-rings. I also found out that the contoured Super-T Tip I am using is not the normal size, it was turned down thinner by the guy I got it from. A normal sized tip will not fit through the base of the Depth Charge.

 

[ukeman]

so got to bevel the tip of the carto or customize and/or find a d/t that is small?
with the rubber tip does that eliminate the need to bevel or use the d/t?
is there an easy way to bevel the tip?
thanks

I found that if you leave the rubber end in your carto when you push it into the tank it will protect the O-rings. I also found out that the contoured Super-T Tip I am using is not the normal size, it was turned down thinner by the guy I got it from. A normal sized tip will not fit through the base of the Depth Charge.

 

[Para]

The Depth Charge is on the site (but out of stock). It is the next to last item under Category. Hope that helps.

Depth Charge

Is there a picture?

 

[fenderbc]

Depth Charge

Is there a picture?

Para, Jonah posted a couple of pictures here:
http://www.e-cigarette-forum.com/fo...introducing-torpedo-tanks-74.html#post4023640

 

[NatureBoy]

Hmm, looks good but personally I'm not a fan of the beveled bottom.. I'd prefer a flat bottom so it sits flush with the mod.

 

[Grammie]

Beveled provides a little bit better airflow, just my

 

[Para]

Para, Jonah posted a couple of pictures here:
http://www.e-cigarette-forum.com/fo...introducing-torpedo-tanks-74.html#post4023640

Awesome....looks great. Gotta have one when he rolls them out

 

[NatureBoy]

Beveled provides a little bit better airflow, just my

I'd agree if I'd experienced any air flow issue with tank mods, but I have not. I don't think it looks good like that.

 

[Grammie]

Just saying, some people have. Plus, some may have a mod that's beveled at the top.

 

[tyleris12]

I think Jonah's Depth Charge tank looks great and I can't wait to buy one!

 

[JonahNM]

I think Jonah's Depth Charge tank looks great and I can't wait to buy one!

Thank you Tyleris. I am hoping to put them up Thursday night. The final numbers are regular 2ml and XL 4ml.

 

[Grammie]

Any news yet?

 

[tyleris12]

Great news Jonah!!

 

[Pete54]

Well I've been holding off buying tanks waiting for these Depth Charges so I guess I'll be stalking this thread and your website Thursday night!

 

[heymichael]

I thought I saw you stalking outside my window the other night. That's MY job!

Well I've been holding off buying tanks waiting for these Depth Charges so I guess I'll be stalking this thread and your website Thursday night!

 

[Grammie]

Great news! Will the pyrex tubes be available then too?

 

[otrpu]

With the Torpedo Tank it's critical that you cut the metal C-E2 Carto long enough, right at 10mm. If not, when you screw it down on the ProVari it will back the E2 back out of the end cap and leak. And, if it's long enough to seal, but too short, it can cause airflow problems. Maybe a beveled bottom connector would help in this respect. JMHO

Cheers,
otrpu

 

[MXBNW]

Got a Punch ordered today and got tracking already

Any word what the Depth Charge is going to cost. I think I will pick one up.

 

[JonahNM]

Got a Punch ordered today and got tracking already

Any word what the Depth Charge is going to cost. I think I will pick one up.

They are going to be $50 and I plan on having a few options that will take them a bit higher.

 

[JonahNM]

Great news! Will the pyrex tubes be available then too?

I don't know, we are working on it. I hope to have the stainless steel tubes ready by Thursday, but that may take a little longer.